Top 5 MISTAKES When Vacuuming Your Pool!
⏩ HAVE A QUESTION FOR MARK? ⏪
If you have a question you'd like answered or would like to book a 1 on 1 phone session with Mark, then consider checking out our Patreon page!
/ hallmarkpoolsupplies
Visit hallmarkpoolsupplies.com for all your pool supplies, and needs
Video Timestamps
00:00 - Intro
00:22 - Mistake 1
01:16 - Mistake 2
02:26 - Mistake 3
04:10 - Mistake 4
05:15 - Mistake 5
How to Vacuum an In-ground Pool: • How to Vacuum an In-Gr...
How to Vacuum an Above Ground Pool: • How to Vacuum an Above...
How to Unclog your Skimmer: • The Easiest Way to UNC...
Constructing this $300k Backyard Paradise: • Constructing a $300,00...
Пікірлер: 125
excellent video. I have owned a pool for over 20 years and have never really learned the correct way to vacuum up until today. Thanks Mark. much appreciated
Wow, I have been doing it the wrong way and the hard way all these years. I learned something new and useful day.
I’ve never heard of a vacuum plate, I’ve been using a leaf catcher. I didn’t know about the difference ends of the hose, game changer!
been doing it wrong and fighting it all these years lol gotta love the internet!
Also, clean basket and backwash when done.
Just moved to a house with pool, definitely informative, I had a clorine system added, and automation to operate my valves. Turning the pump on and off and going to spa mode with heat is easier, but now there is little pull in my skimmer, I’m going to check water level. My filter is clean and DE pressure looks ok, I need to figure out which valve decreases pull from the bottom and move to the skimmer basket. I have one skimmer basket besides the one on the motor .
Thank you sir I just learned I needed a vacuum plate, just ordered the plate before ordering another rover!
Never heard of a vacuum plate. Glad to know now.
Definitely trying this today I been having a hand vacuum for 3 years gave up on it and just tried it again this week it just doesn’t seem to be pulling anything looks like I’ve been doing it wrong all this time great video 👍
I have owned a pool for 3 years now. Came across this video and was wondering what mistakes can you possibly make. This is how I do it too. It's more common sense than anything else.
Strange... pools here in europe we have a vaccum port on the side of the pool wall... we dont go through the skimmer..... 🤷♂🤷♂😁😁 Kool video ... Thanks 🙂
Just what a newbie pool owner needed to view 👍👍🇨🇦
I like this type of vacuuming my pool. Thank you!
Thanks Mark, This is great information for guys like me who are new to pool maintenance.
Thank you very much for the advices and your time. Have a great day.
I appreciate that you are giving these informations. It’s really makes me motivated. Thank you so much.
So glad I watched this. Just bought a vacuum-we’ve only used a Shark and it just doesn’t cut it! Had no idea of several of these steps! So helpful!
Thank you sir ,for making this video I been helping my ex-wife with her pool because she couldn't afford his services So I just wanted to thank you for helping us out sir
Excellent tips! Thank you!
Finally, the video I’ve been needing!!
Just purchased a hole with a 35k gallon inground pool. I've made 2 of the 5 mistakes when I vacuumed for the 1st time. I'm headed over to watch the unclogging of the skimmer video now 🤷♂️🤦♂️.
@Deploracle
4 күн бұрын
Old pro here ... when you encounter items likely to clog your skimmer (sticks/rocks/etc) try to use your leaf rake to collect them prior to vacuuming. Use a motion similar to a push broom .. a quick push will lift the debris a little off the bottom putting it into the perfect position to snag it with the rake. When you are down to dirt/sand/pebbles the clogging risk has passed. Vacuum without fear. With a little practice you will be using that leaf rake for everything but dirt. I'm talking about the leaf "nets" not the flat screen things that rarely work.
@mikef2571
4 күн бұрын
@@Deploracle Thank you, I understand what you are explaining and will do that from now on. I have a very large Cottonwood Tree 🌳 that loves to drop leaves. Again, thank you.
This guy is the best imo ; informative and intelligent
thank you so much explaining clearly
Well, I definitely was doing this wrong! Thanks for the helpful video!
Tip 1 was news to me. Thank you!
Pool looks amazing 🤩
I got a small vac handle and vac in the pool with a snorkel. Have a swim and clean at once.
Thank you !!! Very informative. Appreciate ❤
Great video, love what you’re doing.
I had no idea what that disc was for. Wow. Was always worried about my skimmer.
i wanna say thank you very much i learnt alot on this video and i want more from you about the pool
So helpful, thank you.
Great video! Now I know the right way to thank you
Thank you so much for making these videos! It is helpful to all of us from a blow up pool with a filter to an underground pool . BTW the pool is amazing beautiful job!!! 1 day I will be calling!!! Everyone stay happy healthy safe and blessed!!!
thank you for the video, I was doing everything wrong
Terimakasih mark.Cukup membantu saya dalam membersihkan kolam renang.
Super informative!!!
Thanks for the video
Excellent video! I bought a new house with an in ground pool and whenever I try to vacuum, the pump loses prime (it makes a different sound and the glass gets empty). I worked around it by half opening the valve of the drain which is on the floor of the pool in the deep end, (which is on the same system as the skimmer - setting on filter and NOT waste) but I am obviously not getting optimal suction for vacuuming the pool. I never thought of filling the pipe with water before vacuuming. From now on I will do as you said and have 100% suction :) And yes I have subscribed!
thanks..
Excellent video - One suggestion - back off on the main drain suction to direct more to the skimmer-
Im in south carolina and i never seen or heard of the vacume plate.
Thanks!
@HallmarkPoolSupplies
25 күн бұрын
Thank you very much and thanks for watching.
Best videos on KZread, Thank you for taking the time to make them
thanks for sharing! like112
Love the video. Can you do a video on how to install a sheer descent waterfall blade. If the plumbing for the pool has been done once I buy the correct hose to connect to everything to waterblade is there any other adjustments that need to be made. This is for an inground pool. Thanks. Would appreciate any help you can offer. I already know how to build the brick fountain just want to make sure I'm not missing any steps on installing waterfall. Also not sure which way to turn water valve.
@HallmarkPoolSupplies
9 ай бұрын
Most kits will have instructions for hook up. A sheer descent or any water feature will vary depending on size of pump, the plumbing size and the amount of flow needed for the water feature you have. You can also check out the manufacturer’s specs for that particular water feature. Hopefully this will help. Thanks for watching.
Love your vid! Why do I get air in my pump when I use a vacuum plate every time but not when I plug directly into the skimmer?
@HallmarkPoolSupplies
9 ай бұрын
Make sure you put the stationary end of the vacuum hose on the vacuum plate, if you hook up the swivel end of the hose on the plate you will suck air. If you are hooking the hose up properly then you need to check the cuff on the hose, if the cuff is loose, cracked or the vacuum plate is cracked then you can also suck air. Thanks for watching.
Do you have any recommendations on the best cordless pool vacuum for algae?
@HallmarkPoolSupplies
25 күн бұрын
I do know maytronics who makes dolphin cleaners have cordless units. I like plug in because they have constant power and are more powerful. If you need help l do sell these cleaners. If you would like to email your contact info l will be glad to help. Thanks for watching.
Hi Mark, very informative video, it’s good when you learn something, it’s why we are here right, so thank you. Ok so the reason why I am here is because I made one of the mistakes highlighted in your video, and I didn’t use the skimmer plate… I just went right in with the end of the hose into the intake… my concern is now, as I was vacuuming quite a bit of debris which I followed up with backwashing, could I have done some damage to the filter or added debris to the sand that is now contaminating it. I’m probably overthinking but I would like to get confirmation from an expert. I will be using the skimmer plate in the future!
@HallmarkPoolSupplies
3 ай бұрын
If you clean out your pump housing basket, backwash and rinse the filter you will be fine. Thanks for watching.
@mandosandos
3 ай бұрын
@@HallmarkPoolSupplies thank you 🙏🏼
@mandosandos
3 ай бұрын
@@HallmarkPoolSupplies another tip / step re maintaining a pool learnt. 🙏🏼
I still wanna learn more
In your sand getting into your pool video, you said you could tell if sand was getting into your pool by the return jets or if you backwash it and sand is in the backwash pipe. QUESTION: My question that has been bugging me is how would having sand in your backwash pipe tell you that you had sand getting into your pool from your filter. The video made it sound like if you have sand in your backwash pipe that is an indication you have a broken lateral. Please explain this so we will know because I have dand getting in my pool but I have no idea what that has to do with my backwash pipe. Please Explain Thnkx
@HallmarkPoolSupplies
9 ай бұрын
When in filter or backwash the water goes through the lateral assembly. You should not have sand going into the pool or coming out of the backwash line. If you recently changed sand and you put to much sand in the filter and you backwash, sand can come out of the backwash line, eventually the sand will self level. If you have or have not changed sand and sand is going into the pool you may want to check your lateral assembly for damage. If the lateral assembly is damaged backwashing the filter will not put sand in the backwash line. If the backwash line itself is cracked or damaged underground, when you backwash sand and dirt can wash the ground out around the pipe. Thanks for watching.
Thank you! Bought our house 4 years ago, so still somewhat new to pool maintenance. I have a sand filter and have always set to backwash. I didn't realize I could vacuum set to filter. Is one setting preferred over the other? Using backwash means I have to stop periodically for the water level to reset -- even though I keep the water hose running at max while I vacuum.
@HallmarkPoolSupplies
3 ай бұрын
Never vacuum in the backwash position. Always vacuum in the filter position, unless the pool is extremely dirty or algae infested, then vacuum to waste. If you vacuum to waste you will have to add water to the pool. Thanks for watching.
@Deploracle
4 күн бұрын
That's unfortunate. There is very little space inside the Filter Laterals for debris, and if they don't get clogged, all the debris you just vacuumed up is sent right back to the pool upon setting the valve back to Filter.
@Deploracle
4 күн бұрын
@@HallmarkPoolSupplies This should be pinned atop every pool-based comment section. Thank you
I’m thinking of using a skimmer basket sock to catch more debris is that a better way?
@HallmarkPoolSupplies
8 күн бұрын
Yes, filter savers work well. Thanks for watching.
Thanks for providing this video. Where can I find the link to your Patreon page? (Edit) I found you.
I have always connected my hose to the vacuum port on the wall of the pool, this seems to be a strong suction when fully opened ?
@HallmarkPoolSupplies
Ай бұрын
Some pools have vacuum lines and do not use vacuum plates, be careful not to clog. If you use a vacuum plate you can vacuum out of the skimmer. If you shut down other suction lines you will have just as much suction vacuuming from the skimmer. Thanks for watching.
@steveadams8487
25 күн бұрын
Some inground pool installers do not install a vac port in the pool wall. It seems to be getting done less and less, probably to cut costs and increase profits. My pool also has a vac port, and I use it often, but if we have a storm with wind, and I get a lot of debris in my pool, I’ll vacuum exactly like the video instruction to keep debris out of my vacuum line. I have a Polaris atlas, and it vacuums everything, and doesn’t know what will go through the vacuum line. This saves pool equipment. Best of luck to you.
The owner of this pool has never vacuumed manually, they have robot vacuums for sure
@msdixie1972
7 күн бұрын
Sometimes you can’t use a vacuum of the chemicals are really unbalanced and it’s potentially going to damage the bot.
Also, be sure you buy a vacuum head with a brush if you are trying to vacuum algae. Made the mistake of getting one without and was a total waste of money.
Turning off the pump to remove the vacuum plate/hose will allow basket debris to float and reenter the pool, especially if you are using skimmer socks. A better option, if you have it, is to shift the inlet from skimmer to the main drain. The reduced suction will allow you to remove the plate but the debris will remain in the basket.
@HallmarkPoolSupplies
20 күн бұрын
Yes, however the skimmer has a weir door which will prevent debris from going back into the pool if the pump is turned off. Thanks for watching.
My pool is green and i don't know what to do will you mind helping
I want to know what that hedge is in the background, lol. I need it!
@HallmarkPoolSupplies
Ай бұрын
Wax Myrtles, thanks for watching.
@CP-nf9my
Ай бұрын
@@HallmarkPoolSupplies Thank you!
Thanks I’ll tell my wife
What about a leaf trap so you don’t have to worry about clogging the skimmer line?
@HallmarkPoolSupplies
Ай бұрын
That is what the basket is used for, thanks for watching.
My aquabot is not working.. I just recently opened my pool, vacuumed it out. Today , I placed my pool cleaner in the pool, plugged it in and it does not cone on. ?? Any recommendations?
@HallmarkPoolSupplies
7 күн бұрын
Check your power supply. If you have power and can’t get the unit to run l would take your cleaner to the nearest Aquabot dealer. Thanks for watching.
#4 is me. Never heard of #5, but it sounds messy.
as a female doing this job is interesting and please help me learn on how to go about the pool your video is interesting
@shondriadeblaw6329
2 ай бұрын
I have been cleaning my own pool for a while now. I was forced to learn after being ripped off by several pool cleaning companies in my area. It has definitely been a learning experience but has overall been rewarding. Once cleaned and balanced believe me, it is easier to maintain and prevent than to slack off and have to treat and restore. As a female pool owner, I have thought about posting my own videos. Maybe I should now. I recently had to install my own pump motor after my home warranty company kept stalling to find a repair person.
I just watched another vacuuming video that said to use your backwash mode to clear out debris but remove the filter grids first. Now your sayknv not to vacuum in the backwash serting. I dont have a waste setting on my filter. Why cabt i do this?
@HallmarkPoolSupplies
2 ай бұрын
When vacuuming your pool you will be in the filter position for normal cleaning. Backwash your filter if needed when you are done. If your pool is extremely dirty or algae infested then you will vacuum in the waste position. When vacuuming in waste you will have to add water to the pool. If you do not have a waste position then you will have to vacuum in filter unless you have a drain position. Drain and waste are the same. If you have a drain position then you will also have to add water to the pool. Thanks for watching.
Can I vacuum with my sand filter in the “bypass” position? I just opened my pool and my sand filter’s outer shell/egg cracked. It’s 2 weeks before a new filter can be installed and I still need to vacuum my pool and don’t want the debris sitting in it for the next two weeks.
@HallmarkPoolSupplies
24 күн бұрын
Yes, you can vacuum to waste and bypass the filter but you will have to add water to the pool. When you are done vacuuming you can put the filter in the recirculate position. In recirculate you are not filtering the water but you can at least move the water in the pool until the new filter is installed. Thanks for watching.
@Lillyofthevalley222
24 күн бұрын
@@HallmarkPoolSupplies okay, thank you so much!
Dumb question. I have a kit I bought but there was no vacuum plate. In addition my skimmer has the handle to pull it out, so I don’t know if a plate would fit on it. What else can I do?
@HallmarkPoolSupplies
Ай бұрын
Most skimmer baskets have handles, if you get the right vacuum plate for your skimmer it will work. If you would like to email a picture of your skimmer l will be glad to help. Thanks for watching.
My pool is green and i don't know what to do will you mind helping 😢
I would add - Go Slooooowwww. It should take some time to properly vacuum your pool. Many just rush and actually end up unsettling everything that is on the bottom instead of sucking it up.
I have a colmans above groundpool. It didnt come with a skimmer. How do i backwash the filter . I have the hose but dont know where to hook it up. Anyone out there could help me
@HallmarkPoolSupplies
23 күн бұрын
If you don’t have a skimmer then you will have an outlet on the side of the pool which is your suction outlet. Your hose will go from the suction outlet directly to the suction side of the pump. The hose on top of the pump goes to the multiport of the filter if you have a sand filter. The return outlet on the multiport has a hose that will go to the return on the pool (this is the pressure line). You should have instructions with your pool that will show how to hook up everything. You can also contact Coleman and talk to customer support for help. Thanks for watching.
My pool is green and i don't know what to do will you mind helping 😢😊
Very helpful. My robot is in the shop
I watched another video on matching a patch on a liner . I am looking for a piece of Tara port royal and you said you have warehouses of them. I paid to subscribe to this and got no reply?
@HallmarkPoolSupplies
Ай бұрын
I have tried to contact you through patreon several times. I do have the liner patches you want. If you can email me with your contact info l will be glad to help. My email is on my KZread channel. Thanks for watching.
I just wanted to see how you roll your hose up lol
Just use an inline leaf trap
Can you help me clean my pool please
ive had an inground pool for 8 years. how did i never know that one end of the hose was swivel, and one is stationary lol.
That pool is too nice to be a vinyl liner pool
@HallmarkPoolSupplies
Ай бұрын
The pool in the video is a vinyl liner pool, it was just custom built. Thanks for watching.
Do you hire a pool guy Sir?
@HallmarkPoolSupplies
2 ай бұрын
Sometimes, thanks for watching.
Very obvious mistakes that only take a little thinking to avoid doing that....are people really that dumb to make those mistakes?
How about us gals...not all guys lol. Thanks
Just get a battery powered pool cleaner or stay in the Stone age.
@chucklakes2345
2 ай бұрын
You can’t do that if you clean pools for a living. Robots are great but take way too long for us pool companies.
@peterfreeman7197
2 ай бұрын
A Wowvacpro isn't a robot cleaner?
@chucklakes2345
2 ай бұрын
@@peterfreeman7197gotcha, looks nice.
@hm2nite
Ай бұрын
Had two battery powered, and they did not last long, nor did they clean the whole pool, before dying.
@peterfreeman7197
Ай бұрын
@hm2nite Bad luck dude. Ours go on and on. What did you have?
Most useless video I've ever seen . Must be hard up for content lol
Thanks!
@HallmarkPoolSupplies
29 күн бұрын
Thank you very much and thanks for watching.
Thanks!
@HallmarkPoolSupplies
14 күн бұрын
Thank you very much and thanks for watching.