Ah ! I just finished reading the wood finishing book and found it very informative. Great vid to sum it up for people who don't want to read the book.

@SawsHub

3 жыл бұрын

Glad it was helpful!

quite thoroughly explanation about this type of wood finishes. Thank you!

@SawsHub

3 жыл бұрын

Thank you!

Really simple and informative! Thanks!

@SawsHub

3 жыл бұрын

Glad it was helpful!

This is exactly the information I needed!

Also great video and channel, thought it said 249k subs and believed it not 2.49k. channels like these needs more subscribers.

@SawsHub

3 жыл бұрын

Haha, no where near 249k! That would be nice though :)

Best informative video on wood finishes! Checking these out in Home Depot gave me anxiety, but not any more!

Great job explaining.

@SawsHub

20 күн бұрын

Glad it was helpful!

Very helpful, thank you!

@SawsHub

3 жыл бұрын

Glad it was helpful!

So informative, thank you

thanks for the tips

Hi, thank you for this video. Very useful. I started a dining table project and I’m in the process of finishing it. I’ve put three coats of Ronseal interior varnish but I realised I should have used polyurethane. Can I put polyurethane on top of varnish? Will it ruin the table?

Thanks a lot!

Very helpful thank you!

@SawsHub

20 күн бұрын

Glad it was helpful!

So what would you use for a deck seems like youd want varnish for uv protetion but urathane cause its more durable

Thank you!!!

@SawsHub

10 ай бұрын

You're welcome!

Very informative. Thank you. :) I have a question though. I have been trying to varnish over stained rosewood. But it turns to a darker shade when I do that. Any tips or alternatives for varnish that I can use to keep the stain colour intact. In this case, aqua blue is turning to dark aqua green after a coat of varnish.

@SawsHub

3 жыл бұрын

Use water based - it shouldn't alter the color much (if at all).

So well explained. Subscribed and now going to be able to chat with my Dad :)

Can i use varnish to polished zinc alloy? Can it protect from corrosion?

Great video

Great! What is shellac then, and how does it compare? What do we use on antique furniture made with mahogany veneer, and do we wax all wood furniture once in a while to maintain the finish? I'm still a bit confused. My parents' antiques get waxed but the finish is shiny.

For a cigar humidor, which would you chose ?

How would you identify a varnish finish vs a poly finish?

Hi. THANKS for a great video. This is a jungle ;-) One question: Can you use polyurethane on top of e.g. Danish Oil or some other oil product like Osmo oils?

Excellent.

@SawsHub

3 жыл бұрын

Many thanks!

Thank you. Where does Shellac fit into the picture? And why use it? Everyone seems to, but I don't understand why except perhaps when some sort of coloring is going to go over it. Can you apply any of the three finishes you mention on top of shellac?

@SawsHub

2 жыл бұрын

Search our channel for shellac, we cover that in depth on several videos.

i was wondering what would be the best to protect painted metal (oil based enamel paint) that will be outdoors. i believe exterior urethane like an oil based spar urethane is the best for that but I'm not too sure. Been reading that lacquer may damage the paint and not adhere well.

@SawsHub

3 жыл бұрын

Spar varnish comes to mind as a very good option

I have an unfinished magnolia wood handle on a Japanese chef knife. I would like to seal it, so I don’t have to constantly oil it. What type of varnish/lacquer would you recommend?

I have a mango wood table which has been finished with a flat lacquer. If i want to keep it outside, can i use spar varnish over it to protect against UV, termites, mold, or is there another method which might work? Thanks for any tips.

@DavidfromMichigan

2 ай бұрын

I know it's probably a little late but yeah, any oil based or water based finish can go over lacquer, as long add the lacquer has dried completely. (12-24 hours)

Yeehoo Im the 1000th like, and you deserve much more. Super informative, thanks a lot for the clarifications!!

Ok…if I’ve already put 3 coats of beautiful lacquer on but want to switch to varnish, can I put the varnish on over top lacquer or do I have to strip it right down and start over? I hope it’s the first answer.

I recently finished a project using Minwax polyurethane which I diluted to a whip on consistency using mineral spirits. I did 6 coats waiting 24 hours in between coats, yet 3 weeks later my project is still giving off the polyurethane chemical smell, which gives me headaches and absolutely aggravates me to no end. Why is this happening? and is there an alternative finish (not lacquer) that does not have this incredibly long life off gassing? Thanks

@SawsHub

3 жыл бұрын

6 coats = lots of off gassing. Also, you added mineral spirits, which only adds to the chemicals. Be patient! You'll have a solid finish once its ready!

Hi sir may i ask a question i use polyurethane varnish before then my client he change mind he like to put locker varnish now its that ok?

@SawsHub

3 жыл бұрын

If I understand your question correctly, it should be fine, provided they are the same base (oil vs water)

What about catalyzed lacquer , conversion varnish ?

@SawsHub

3 жыл бұрын

Not sure the question?

Can the vanish use on MDF WOOD?

@SawsHub

2 жыл бұрын

Yes. Be wary it will take a LOT of varnish though

What is my can is called Polyurethane Varnish???

Very helpful - thanks! I see a product in the store called "Spar-Urethane"... I assume this is the same as a spar varnish?

@SawsHub

3 жыл бұрын

Virtually the same, except spar urethane takes longer to set than spar varnish by a bit

Thank you for the info! I'm building my own computer desk. What type of protectant would you recommend for that? Based on your video, I'd guess an oil varnish. Should I apply multiple coats?

I got water base lacquerer. it doesn't smell , so not all of them toxic

@SawsHub

3 жыл бұрын

There really isn't any water-based lacquer. Essentially, its polycrylic.

@mikemaman1

3 жыл бұрын

@@SawsHub "Ingredients of water based laquer are alkyd, acrylic and/or vinyl acrylic polymers. These microscopic plastic particles are dissolved in water. Water based laquers have many advantages over oil based laquers". So this is not correct?

A really fine delivery, very flowing. Great HD quality. Nice speaking voice. I used SPAR varnish on a cedar cabinet project in woodshop class in High School. What would you use to cover bamboo fencing material: varnish or polyurethane? The only thing that struck me funny (um, your wife must not have caught you), is your very wrinkled maroon polo shirt in the final segment! :-0.

@SawsHub

3 жыл бұрын

Thanks for the tips! And no, I don't iron my shirts to do woodworking :)

Can you use marine varnish and top it with a couple of coats of polyethylene? Have you ever cut polyethylene and lacquer together? Can you use these products over jung oil or bees wax?

@SawsHub

3 жыл бұрын

Yes: Can you use marine varnish and top it with a couple of coats of polyethylene? No: Have you ever cut polyethylene and lacquer together? I haven't tried but polyurethane and varnish would probably work. Can you use these products over jung oil or bees wax?

Clear Coat Polyurethane is what I use for my Framing Hammers, Forging Hammer, Hatchets and Felling Axe Handles. after I stained them with a Gunstock Finish, I let them dry for 2 days, yeah I love Gunstock Finish Stain and then I coat them with Clear Gloss Polyurethane. Especially Oil based Polyurethane the one that I got from Home Depot is Highly Durable and Highly Scratch Resistant. I applies only 2 coating of Clear Gloss Polyurethane after the stain. For Furnitures??? (Yeah I builds them too!) I use Water based Stain, or oil based and Shellac for Clear Gloss Coating But sometimes I only use Natural Boiled Linseed Oil. For High End Furnitures or Countertops I use Epoxy.

@SawsHub

3 жыл бұрын

Thank you for sharing

0:26 damn, procrastination is real huh. Really aged a bit there while finishing this video

@SawsHub

3 жыл бұрын

Haha too funny

dude, you aged so fast!

@SawsHub

3 жыл бұрын

Father Son Duo :)