Hey Jason, sorry again about your dad. That's tough. I don't think that the 500 stage turned gray because of silicon carbide. I think that's the aluminum from the pan and the rock wearing down. It's like sawdust when sanding wood. You would expect it to be the color of the wood, not the color of the sandpaper. I really enjoyed this video. It's something I've never done but have been curious about. I usually prefer watching something from someone with experience, but since you explained what you were thinking and learning along the way, it was very educational. I'm sure you'll do more videos as you get better to show more efficient ways to get the job done. It sure did turn out nice in the end. You have to be very happy with it. Great video. I like one long video rather than two videos.

@RockhoundingLife

3 жыл бұрын

Thanks Rob! I didn't even think about that! That would explain why it turned an even darker grey than the silicon Carbide did in stage 2. There was definitely grit in the limestone but I must have gotten enough out when soaking it to not have an affect on the final polish. I'm reserving my opinion/recommendations on the Vibralap until I get more experience using it with different sizes and types of rock. I will do more videos on it in the future. And yes I was very happy with the results considering I had thought I had grit contamination throughout.

@keithblack6926

3 жыл бұрын

I have to agree with rob ,but it's just a guess on my part

@toddwever4916

3 жыл бұрын

Definitely the aluminum pan turning it grey. If you use anything to polish aluminum it will turn a rag or sponge black.

@RockhoundingLife

3 жыл бұрын

@@toddwever4916 Thanks! This is a big relief as I thought for sure I was getting cross contamination with grits.

@laurietim6285

3 жыл бұрын

Pl

I'm sorry for your father. Condolences!

@RockhoundingLife

3 жыл бұрын

🙏

Sorry for your loss. Lost both of my parents and it was hard. I never "got over" it but you do learn to cope. Additionally, you can fill the voids with a thin viscosity epoxy (clear), before you start polishing, and you won't have holdover grit problems.

So sorry for the loss of your father but i am pretty sure he was proud of how good of a father you became.

Hello Jason, I got the rocks today... you are such a generous man thank you!

@RockhoundingLife

3 жыл бұрын

So glad to hear they got to you ok! Hope you enjoy them!

The dark color of the slurry probably came from the metal base grinding down. That's why it didn't get dark when you used the felt pad.

I am so sorry about your dad. If he was half the dad you are he was really great. My condolences to your family, too.

@RockhoundingLife

3 жыл бұрын

Thank you 🙏

My condolences to you and your family. It's amazing to me how strong you are to continue your video after your lose. Your cycad turned out absolutely beautiful. Thank you for making all one video.

@RockhoundingLife

3 жыл бұрын

Thanks Judy. He was in rough shape the past few years so I'm glad he's no longer suffering. I took a week and a half break from filming this video to take care of everything. Thanks again for your kind words.

Amazing colors. That would look really good with my bedroom decor , lol. No, really it would. Sharing this with us people know that feeling.

I know it’s been a few months since you posted this video. I’m so sorry to hear about the loss of your father. Thank you for sharing your experience with this new tool. I am brand new to this and I’ve ordered my first tumbler and I’m anxiously awaiting its arrival. I’m loving learning all about rocks and tumbling and polishing. Really enjoy your videos!

@RockhoundingLife

3 жыл бұрын

Thank you. I'm glad you are able to get something positive out of our videos. It makes it all worth while!

Wow that is incredible. Sorry for your loss. Thanks for your shares and bring us along on the Experiences. Best Channel ever

@RockhoundingLife

3 жыл бұрын

Thanks Leland!!

So sorry for your loss

Turned out very nice! Thanks for showing us how a vibrating flat lap works.

@RockhoundingLife

3 жыл бұрын

Thanks for watching!!

Sorry to hear about the loss of your Dad ,The lap is a great addition to the shop.The piece turned out great

@RockhoundingLife

3 жыл бұрын

Thanks buddy......did you get out in the warm weather the past couple of days?

Next time, try sealing the stone with thin epoxy in the vugs, or with a spray over the surface to "fix" any dirt or grit from stage to stage.

Hey Jason, really sorry about your Dad. It was really hard on me when I lost my Dad in 2011 abruptly due to brain cancer. My thoughts and prayers.... On another note, I've never seen this type of polisher before, vibrations. So cool, and it worked out great. Thanks for sharing your process and learning.

@RockhoundingLife

2 жыл бұрын

Thanks...really appreciate thise kind words.

Let’s celebrate! I’m subscriber 4.53. This tasty vid came up when I searched for a vibrating flat lab. Looks to me like you’ve done a lot of the homework for me. Thank you very much two times.

@RockhoundingLife

2 жыл бұрын

Well James your timing couldn't be better because I have a brand new video coming out tomorrow at noon est on the vibrolap! Thanks for the sub! Celebrations indeed!!

enjoyed going through this process with you. Really impressed by your level of patience too. So sorry for your loss.

@RockhoundingLife

3 жыл бұрын

Thank you. It's one of those tools where you have to have patience!

Nicely finished project. Fantastic petrified wood.

@RockhoundingLife

3 жыл бұрын

Thanks!!

Belated condolences on losing your Father. That turned out really amazing! never watched one of those gizmos at work, looks like they work well. Thank you for showing us.

@RockhoundingLife

2 жыл бұрын

Thank you.

Jason I’m so sorry about your dad, one thing is for sure that with you he did a great job just like you are with your boys. Blessings🤎🙏✝️

Fantastic video!! I love the piece you chose, go big!!!! It turned out gorgeous and I love the small caves; they just add to the beauty. What a great new toy/tool lol. And I am truly sorry for your family’s loss. 💜

@RockhoundingLife

3 жыл бұрын

Thank you so much! I am very happy with how it turned out!

Very nice job Jason!👍

I am so sorry for the loss of your dad, hugs to you and your family.

@RockhoundingLife

3 жыл бұрын

🙏

OUTSTANDING! Tanks Fer Sharin Mate!

@RockhoundingLife

2 жыл бұрын

Thanks for watching!

So sorry on the loss of your Dad. That polished beautiful.

@RockhoundingLife

3 жыл бұрын

Thanks 🙏 I'm very happy with how it turned out!

Deepest Sympathy to You and Your Father !! This was very informative ! It really turned out beautiful. Thanks much for sharing :)

@RockhoundingLife

3 жыл бұрын

🙏

That looks beautiful! Great job!

@RockhoundingLife

3 жыл бұрын

Thanks for watching!!

Gorgeous job!

@RockhoundingLife

Жыл бұрын

Thank you! 😊

Wow the polished finished product looks great so mirror shine. See u nxt

@RockhoundingLife

2 жыл бұрын

Thank you 🤗

Condolences about your Dad. Nice project to throw yourself into. Beauty end piece.

@RockhoundingLife

3 жыл бұрын

🙏 Thank you.

I spotted a dog and a dove in that.❤ Stage 2 looked like a tree of life.❤ So beautiful.

Great Job!! Good!)

Hey Jason sorry about your Dad many condolences. You guys have seemed to have done a magnificent job.

@RockhoundingLife

3 жыл бұрын

Thanks man I really appreciate it. And thanks for watching!

It is very nice....30 years ago,we made our own...we had it running for days before a satisfactory finish on rocks

@RockhoundingLife

3 жыл бұрын

Thats's awesome! I would love to be able to make my own machines like that. A bit beyond my skill level! Thanks for watching!

Very helpful! Excellent instruction.

@RockhoundingLife

2 жыл бұрын

Glad it was helpful! Thanks for watching!

Hello Jason. I'm so sorry for the loss of your dad, my thoughts are with you. I lost both of my parents several months ago; it is a journey. Be kind to yourself, hug those boyz and, yes I loved the video! Be well❤🇺🇸

@RockhoundingLife

3 жыл бұрын

Thanks for your kind words Lisa! 🙏

Beautiful job!

@RockhoundingLife

3 жыл бұрын

Thank you!

Very sorry for your loss.......

@RockhoundingLife

3 жыл бұрын

🙏

Wow, very nice work ❤️

@RockhoundingLife

3 жыл бұрын

Thank you 🤙

Very cool equipment!!! Thank you for shearing...

@linabaliashvili2495

3 жыл бұрын

And great finish!!!

@RockhoundingLife

3 жыл бұрын

Thanks for watching!

@RockhoundingLife

3 жыл бұрын

🙏

I too have learned that sloppy cuts means extra work. Very cool way to polish. Now to make some sweet bookends!

@RockhoundingLife

3 жыл бұрын

Ain't that the truth!! I'll be making sure my cuts are a lot better in the future.

Nice work.. I'm getting my Covington 16 in machine in the mail in a few days... I'm excited... I have been stocking up on Arizona wood ... Beautiful stuff!!!!

@RockhoundingLife

3 жыл бұрын

Nice! You'll love it! That Arizona Pet wood will polish well on it.

@r0bbyinchins

3 жыл бұрын

@@RockhoundingLife yes. Rocks (mainly pet wood)are the healthiest and strongest addiction I have ever experienced.. a month ago my girlfriend told me it was ridiculous how much more time I spend on my pet wood than I do with her... She told me to choose between them & all I can say is this " THINGS ARE ALOT QUIETER WITH JUST ME AND MY ROCKS HERE" she was so mad ate when I didn't hesitate on the decision.....

@r0bbyinchins

3 жыл бұрын

@@RockhoundingLife have you seen the opalized Colorado snake skin pattern in some pet wood???

Oh jeez, I'm behind on your videos and only just saw this one. I'm sorry sorry for the loss of your dad. My belated condolences to you and your family.

@RockhoundingLife

3 жыл бұрын

Thanks Sarah 🙏

Thank you so much for the video!!! Super helpful!!

@RockhoundingLife

2 жыл бұрын

Glad it helped!!

I'm sorry about your father. I lost my mother in September and nothing has been OK since. When I saw this pop up, I got so happy, because this is my dream polisher but then I saw the price and...well...it's just gonna be awhile before I can indulge. Keep up the good work, and I'll be praying for your family.

@RockhoundingLife

3 жыл бұрын

Thanks🙏. This is the cheapest one I've seen. It's $380.

@AngieDoesStuff

3 жыл бұрын

@@RockhoundingLife did you get it somewhere besides the manufacturer? Because the price i saw online today was over $100 more than that.

@RockhoundingLife

3 жыл бұрын

@@AngieDoesStuff I got mine through Kingsley North.

It was great I did enjoy

@RockhoundingLife

3 жыл бұрын

Thanks for watching!

Very good my friend

@RockhoundingLife

3 жыл бұрын

🙏😀

Love this!

@RockhoundingLife

3 жыл бұрын

🙏💯

Good times right there!

@RockhoundingLife

3 жыл бұрын

💯

This is outstanding information. I have wondered about these vibrator stands. I have been playing with rocks since the 50's and have just heard about these. It seems like it takes to long to do them in 4 hours I could have had that big rock done and polished and setting on display... I use the 4" and 6" flexible diamond grinder wheels from 50 - 3000 grit on my drill press and can do about 10 - 15 rocks from cut to polish in about 6 hours. But I am 70 now so it might be done faster for younger folk.. WELL DONE!

@RockhoundingLife

3 жыл бұрын

Yeah these vibrating laps are definitely for specific situations. Like if you have a busy schedule and need something you can start in the morning and walk away from until you get home from work, as long as you have an automatic drip system. Or if you have multiple pieces you want to get done at the same time. Vibrating laps have been around for awhile. Since the early 70's at least. The technology doesn't seem to have evolved too much since then! Thanks for watching!

@tinkmarshino

3 жыл бұрын

@@RockhoundingLife Wow this is the first time I remember having ever seen them.. though I am 70 and do forget sometimes. This was a very good video though.. I may change my mind ang make one just for the heck of it.. I will have to watch more of your other ones.. what a great little project eh? What do you do with all of yours? I give some away, store others, display the real unusual ones.. Just my cut rocks.. I do slabs and make cabs (but not in a while need another motor) Thanks for taking the time to show all of this.. Sorry to hear about you dad.. But it will be my turn soon and I will tell him what a good job your doing here! Carry on..

So beautiful! It kind of looks like a dissected brain!

@RockhoundingLife

3 жыл бұрын

You're not the first to mention that! It does kind of!

@jackandpiper

3 жыл бұрын

@@RockhoundingLife a very beautiful mind😂

Hi amazing I love the rocks

@RockhoundingLife

3 жыл бұрын

Thanks for watching!!

hey got to get a flap lap, cool vid

@RockhoundingLife

3 жыл бұрын

Thanks! They are definitely fun to use. And holding out for the end results ads a bit more satisfaction.

For your drip system, use an add-a-tee(3/8 female×3/8 male×1/4 male; the most common tee used) to nearby water stop for your sink. Then run some 1/4 tubing where ever you would like. There are push fitting available to run individual stops to each of your stations. Just an idea.

@RockhoundingLife

3 жыл бұрын

Hey thanks for the tip!! I'll definitely look into that!!

Great video, Jason! I'm sorry to hear that your father passed.

@RockhoundingLife

3 жыл бұрын

Thanks Jim 🙏

Rob at Michigan Rocks uses a Sewing Needle to dig the grit out of the deep pockets so they wont scratch the surface while on the next stage.. So Sorry about your Father. This must get your mind off the pain. Luck. [i think the rock face is Brain shaped & the color design emphasizes that. LOL.]

@RockhoundingLife

Жыл бұрын

Thanks....ive started to use epoxy to fill in the holes. Works well and it is clear so you don't lose detail.

Hey Jason when I really need to find something really entertaining as far as the lapidary craft I come back to the video. This is my definite video of yours. Do you ever plan to work with a piece this big again. I hope so.Great Video Brother.

@RockhoundingLife

3 жыл бұрын

Hey man thanks! I'm glad you found it entertaining! It just so happens I was planning on polishing a big seam agate this weekend on the vibralap. So you can look forward to that video coming out next month sometime. Thanks for watching my friend!

Ugh! Dad is a hard loss. Sorry man. I just wanted to tell you that I really enjoy your videos! I'm also a rock hound a few hours north in Sydney. I'm waiting for a slab saw and a trim saw to land from Covington-Eng, and I'm going to start exploring the highlands for interesting material to make cabochons. We also have lots of pet wood, but nothing as intact as your getting in the Valley. Keep up the good work.

@RockhoundingLife

2 жыл бұрын

That's awesome! I really like Covington engineering products. I'm trying to get them to sponsor the channel but haven't had any luck so far. I would love a 20"+ slab saw. That's the dream!! Thanks for watching.

@johnnytarponds9292

2 жыл бұрын

@@RockhoundingLife I already have my 8" Cab King, so the saws are desperately needed. Yeah, I love the build quality of Covington Eng. Covington told me because of "motor shortages" they have long shipping times. The slab saw I bought is the 16". I don't have the room/money for more ATM.

awesome video :)

@RockhoundingLife

Жыл бұрын

Thanks Dave!!!

Prayers for your family. Condolences.

@RockhoundingLife

3 жыл бұрын

🙏

So sorry for your loss💔😪

I'm so sorry for loss

@RockhoundingLife

3 жыл бұрын

🙏

Sorry for your loss. Losing your father is hard. On a more positive note, love the video, and hope all goes well !

@RockhoundingLife

3 жыл бұрын

Thanks 🙏

im sorry about your loss

@RockhoundingLife

3 жыл бұрын

🙏

Another thought to dip rocks with voids in wax before lap then when polishing compleat boil to remove wax from voids

@RockhoundingLife

Жыл бұрын

Thats a good one!

Sorry about your father, hope he had a good life. Peace brother The grey is the pan, aluminum is softer than the rock. I've worked a lot with aluminum and that is the color of worked aluminum.

@RockhoundingLife

2 жыл бұрын

Thanks. Yes I figured that out about the aluminum. Was relieved.

@sfbfriend

2 жыл бұрын

@@RockhoundingLife Wouldn't too much weight wear out your plate faster? I would think, although Im new to lapidary, that you would want the plate harder! I use to lap face seals for pumps and we had a stone of some sort with aluminum oxide running in with an oil. I'm only supposing as I don't know much about this process.

That's a cool rig... I just have the car polisher set up and a tumbler I just added... it's a progression hobby 😅... I plan on getting neck deep 😁

@RockhoundingLife

3 жыл бұрын

The polishing pads are the best at getting teh pro shine, but they take a long time.

Condolences for your Dad, so sorry to hear that.

@RockhoundingLife

3 жыл бұрын

🙏

I'm sorry for your loss. This video was really helpful. The machine seems way more hands on then I thought they would be and use more grit than I expected. Is the wear on the pan just superficial? Like is it just polishing the casting finish off the aluminium or can you feel that it has worn down?

@RockhoundingLife

3 жыл бұрын

I suspect I used more grit than needed in each stage. I also ran it a bit longer than recommended in each stage. This was my first go around so I plan to try and optimize the grit use and time in each stage. Then I will give a proper review. The wear on the pan is superficial. The casting is being polished. It's not being worn down as far as I can tell. I can see this machine being useful for polishing larger rocks like the one I did. Not sure about smaller ones as there has to be an even weight to surface ratio with each piece or else it won't turn in the pan.

Hi I watched your Vid this morning and was impressed with it, " but I noticed you where worried about the AO turning Grey, It is possible it was only the Aluminum base that was causing that, as Aluminum has a silver streak and I use an ally rod as a marking pen for doing Cabs and if your interested do a test with just a rock that has been cut and NO grit just water and a drop or two of soap and see what color sludge you get" as this coloring may just be the Aluminum, I have a steel plate Vib lap and it is harder than Aluminum ""Alumininum is 2.5-3 and steel is 4-4,5 and we try to polish stuff at around 7 on the Mohs scale so which will wear away faster. Am sure you will know.

@RockhoundingLife

2 жыл бұрын

Yes it was from the Aluminum in the pan.

Interesting video. I do not own a vibrating lap like this. Not sure if you have a wet angle grinder for polishing bigger rocks like found at Kingsley North. 2 of my buddies have them and you need no grit at all, super fast way to get mirror finish, you just hook up hose to water source and attach various rubber sanding discs from 60 grit to 15,000. One of my buddies can do 10-15 huge rocks on his outdoor bench in about 30 minutes. He does all rocks on 60 grit, then goes up the grit on all the next rocks and so on. It is super fast, but you need to start with pretty flat rocks cut on a saw. Will save you so much time. About $350 just for the grinder at Kingsley North SKU 3-0439 . You would need to buy all the grit attachment heads as well.

My first thought on the grey slurry was the same a Michigan Rocks in that it is the top of the pan wearing down and turning the slurry grey. I also wonder if you would have put a felt pad in with dawn soap in the lap and let the rock vibrate for an hour or so it would get all the grit to come out faster.

@RockhoundingLife

3 жыл бұрын

I think now it's 100% coming from the aluminum pan. Makes total sense. Some grit may have been going up the cavities but not enough to cause that drastic of a color change. Probably why I didn't see the color change during polishing because the polishing pad was down.

I watch this video, and I think the change in color of your grit was from the red rock dust that was coming off the rock itself.

@RockhoundingLife

2 жыл бұрын

Thanks for that. It's been suggested that the grit color change was from the aluminum pan. Which makes sense going from white to dark grey.

A water-pic, like for your teeth, would work on vugs to get grit out. Only worth it if you have a lot of such rocks. That rock is cool and reminds me of a brain cross-section😀

@RockhoundingLife

3 жыл бұрын

It does kind of look brainy doesn't it!

For smaller rocks I hear to use non drying putty or 2-sided tape to add weight to make them spin.

@RockhoundingLife

2 жыл бұрын

I've thought of using putty as well but it could get messy.

My condolences to you and your family.

@RockhoundingLife

3 жыл бұрын

🙏

Hey Jason, thanks for sharing all the details. This was very informative, so it is appreciated. I like PW a lot, so I think this was a great first piece to try, for a number of different reasons. I'm curious, did you buy directly from Covington or did you find a local or Cdn. supplier?

@RockhoundingLife

3 жыл бұрын

Thanks!! Covington isn't shipping to Canada at the moment so I purchased it through Kingsley North.

Waterpic will clean grit out well fwiw.

Maybe run it on the vibro with only water and dawn in between each stage, to shake the previous grit out of the holes? Then re-wash and charge.

@RockhoundingLife

3 жыл бұрын

🤔💯

HI nice video and great looking finish. How do you feel about this machines durability and have you used it often and on smaller pieces as well? Im looking into a machine like this or a tumbler, though the tumblers seem so long winded and more work. Will this machine roll around small pieces to get a finish like your big piece did? Im new to all this and been researching for the past two years on an off, so many types of equipment and many seem not so great; especially tumblers. Also lots of money to buy a few things. So really looking to buy my saw soon and then maybe a tumbler and or what you have. Any advice or details would be appreciate. Hope your doing well, thank you, Chris

@RockhoundingLife

2 жыл бұрын

I would say that this machine is more suited for bigger heavier pieces. I did a video where I polished smaller pieces on the vibrating lap and they did not turn out as good as the big one. I believe it had to do with the weight. Now you can add weight to the smaller pieces which I am actually about to try. I will post a video of the results.

@ChristopherSchiffermiller

2 жыл бұрын

@@RockhoundingLife Thank you for the info. Is that a red tumbler in this video and what can you advise me about a good quality and durable tumbler that will last. I researched many so far, like Thumlers, Loritone ,Covington and a few lesser known ones; and they all do not seem that good, especially for some of the prices. So any info on a tumbler that you might have personally and how long it has lasted and so on, would be greatly appreciated. Thank you, Chris

🤝👍👍👍 Where can I buy such a vibrating machine? I have never seen such a format before.

@RockhoundingLife

3 жыл бұрын

It is made by Covington Engineering. I bought it through Kingsley North.

The reason your slurry is turning gray is because your aluminum pan is getting worked down. Not. The hidden grit in the voids of your stone

@RockhoundingLife

3 жыл бұрын

Thanks Rory, someone else pointed that out a few months ago. I've done a few other rocks since then with no issues.

Oh my Gosh I’m so sorry about your father

I’m so sorry for your family’s loss.

@RockhoundingLife

3 жыл бұрын

🙏

As stated the grey is possibly the Aluminum wearing off the tray

@RockhoundingLife

3 жыл бұрын

I think that was the issue. I probably could have taken less time cleaning and soaking.

My condolence to you all. I'm sorry to hear that..........

@RockhoundingLife

3 жыл бұрын

🙏

One caveat to everyone ..... Resist the temptation to totally enclose the unit while it is running. The motor would likely get too hot and wear out prematurely. Leave the top of the box open. I've met quite a few rockhounds who have enclosed their laps, either to dampen the sound or contain splashes, and then wonder why their motor keeps getting hot.

@RockhoundingLife

2 жыл бұрын

Great tip!!!

You could try out a styrofoam cooler around the outside to limit the amount of noise, I built a box around my tumbler with one and I can have it running in my house and hear nothing! Just a thought!

@RockhoundingLife

2 жыл бұрын

That's an interesting idea! I have all my lapidary equipment set up in the garage. Noise really isn't an issue anymore.

So when you started up the big ass slab in the lap and it was turning I thought "now we're talkin'"

@RockhoundingLife

2 жыл бұрын

💯

Around 7 minutes you mention a drop system for water. I've been building one but it's proving insanely difficult to find just the right parts to connect a hose to the bottom of a water bottle even though I had built one just a few years ago! Where did you order your system from?

@RockhoundingLife

2 жыл бұрын

I actually did something different. I took the drip set up off the hi-tech diamond flat lap and applied it to the vibrating lap. Works pretty good. You can see it in this video: kzread.info/dash/bejne/npipz6eRfdm3o5c.html

@DavesChaoticBrain

2 жыл бұрын

@@RockhoundingLife Thanks! I'll check it out.

#jayDreamerZ. I leave this as a bread crumb to Y°ü. Yes you. The one reading this This is your chance to prepare. #ChironLast. And #PrimerFields. #DavidLapoint ---- Love the rocks and jewels and most of all the heart. The family.

SO SORRY ABOUT THE PASSING OF YOUR FATHER, what brand is your tumbler great video

@RockhoundingLife

2 жыл бұрын

Thank you. Our big tumbler is an MJR tumbler but I don;t recommend getting one. They are not as durable as a lortone.

@larrymays5413

2 жыл бұрын

@@RockhoundingLife thank you, I'll keep that in mind, I just picked up 2 Lortone's at an Estate Sale

What kind of Lapidary machine do You have, thanks

@RockhoundingLife

2 жыл бұрын

It's a Covington Engineering Vibralap.

Do you have any issues with your pan wearing down in the center? After one summer of running a decent amount of 2-5 lb pieces, starting out on 60 grit, I’ve pretty much completely worn down the center of the dish to where there are no grooves left.

@RockhoundingLife

11 ай бұрын

No not yet. But ive only done about 10-15 polishes on it so far.

How does this vibrating lap compare to a regular lap? Is the vibrating lap good for all sizes of rocks or just large rocks?

@RockhoundingLife

Жыл бұрын

Personally I like it better for larger size rocks. It does an amazing job. Smaller rocks can be cumbersome.

@KT-rl1dy

Жыл бұрын

@@RockhoundingLife Thank you. I am new to all this. And I am trying to figure things out.

Oh yes we made A drip system .

@RockhoundingLife

3 жыл бұрын

I have a drip system now as well that I will show in my next vibrating lap video. Works really well once you get the right drip going for the pieces you are polishing. Thanks for watching!

i have some from arkansas im looking for some1 to tell me how old they are i have 1 piece thats 100 pounds and many other way less

Where did you find Petrified wood too?

@RockhoundingLife

3 жыл бұрын

Bay of Fundy Nova Scotia. Scots Bay area.

@Awaken1111-Patti

3 жыл бұрын

@@RockhoundingLife awesome 👌 thanks

How do you polish a 70 lb trunk of petrified wood?

@RockhoundingLife

Жыл бұрын

With an angle grinder, outside.