Hey buddy, thanks for the reply.

nice bike man

Okay so I finally got my channel fixed. Yes it ran just fine with the 29.5's until it exploded my rear diff and right rear axle,subframe,sway bar, hub,and both control arms. Luckily it was all covered under warranty. It now has 27 executioners on it and no lift or spacers. The headlight kit is a kit you can get off of eBay for like 20 bucks. I loved it with the 29.5's but the wheeler was not built or meant to run such an awesome aggressive tire. Once again sorry for the delayed reply but I have it fixed now so if I missed one of your questions please let me know. Thanks

nice video.thanks

how good does your bike pull those tires? and does it make a difference with anyone riding with you? got a 570 sp thinking about putting 29.5 ols on it

I have a 2015 polaris 570 sp. would the sp be better for bigger tires since it has power steering and dual a-arms with McPherson struts?

did you just use a wire jumper for the headlights?

Same question.... How did you do the headlight mod?

I have got a Polaris 570 2016 and I am getting 28" outlaw 2s, do u think I will need spacers?

Oh the exhaust no I didn't cut the baffles out and it runs fine and don't sound bad at all

Where did you get your wheel spacers and hub adapters?

does the bike run fine with the exhaust like that?

For the headlight mod how did you do it?

what lift do you have?

did you install a clutch kit

Get different rims w/ more of an offset to create more clearance between your shock and tire..or a bigger spacer..I run inch an a half spacers...I think your right bikes as little small to be running 29.5's..good luck.

what axles do you have

Sorry last one I think. No I didn't put clutches in it the lift wheels and tires were only in a week and didn't make it one ride and it destroyed the rear end so I pulled all the lift and tires and wheels off and just run 27's on ITP hurricanes without spacers.

Ok thanks

nicee

I have a 2012 sportsman 500 ho and I was wondering where you got the blue gage at because mines busted and that means no 4wd lol so she's 2wd until I get a gage

@jodybrooks5795

7 жыл бұрын

The instrument cluster is stock.

do you feel like you need a clutch kit with that set up? or does it do pretty good on the stock clutch setup

@jodyb91581

7 жыл бұрын

Not really, It was a little sluggish which is to be expected. A clutch kit would improve the bottom end, but I think it did fine without a clutch kit

@jericholee8360

7 жыл бұрын

Thank you very much for commenting back on such an old video. I have a 2016 Polaris sportsman 450 ho witch is a detuned 570. Rvs has several tunes for these bikes and I he also offers clutch kits. I was hoping I could get away with not having to get one for a little while

@CM-maga

6 жыл бұрын

Jericho Lee hey man did u ever go with that setup? I got a 16 450 too and had the same question as you asked.

Where did you get the spacers? And what were the dimensions. Ive got the same setup trying to make it work.

@jodyb91581

5 жыл бұрын

Bradley Driver I ordered them off of ebay

Where did u get ur spacers I'm in the same boat bought the wheels and they won't fit

@cris-kr3ny

8 жыл бұрын

+Bobby Acker are you using stock wheels?

I have a 2015 570 base model. I have an HMF swamp series XXL (which sounds nasty). I would like to know how well 44 hp turns these tires? my best friend has a 850 highlifter with the same tires and they destroy front diff's frequently.

@tomwilson1102

7 жыл бұрын

Arick Hook what

@ait8034

5 жыл бұрын

Just little bit late but did you use a fuel tuner if you didnt did you have any proplems.

hey bud. how'd you get the grizz tip on? did you have enough room to get a nut through to the back and use the bolts they come with or what?

@jodybrooks5795

8 жыл бұрын

No I used self tapping screws. And it has been like that since the video was made and I haven't had one back out yet.

@nickczerwinski9225

8 жыл бұрын

+Jody Brooks sweet! i got my bike a few months ago and going into deep water I'm having it stall but I'm not getting water in the airbox and the spark plug boot ain't wet. apparently doing this keeps the engine from stalling out from water back pressure when the port is covered

@jodybrooks5795

8 жыл бұрын

I haven't submerged mine but I see where it could possibly help the motor free flow a little better. I know on my last wheeler I ended up putting a snorkel on the exhaust bc of that reason. I have taken a little better care of this one lol.

@nickczerwinski9225

8 жыл бұрын

+Jody Brooks just curious, did the tip have a spark arrestor. idk if the factory one really will even work with this honestly haha.

@jodybrooks5795

8 жыл бұрын

+Nicholas Czerwinski yea the tip that I ordered come with one

Would 28 outlaw 2 fit on the 570 without a lift or spacers

@jodyb91581

8 жыл бұрын

Probably not without rubbing but I'm not sure I have 27's now with no spacers and only lifted in the front to make it set level.

How did u plug the bottom hole on the exhaust

@jodyb91581

6 жыл бұрын

muskoka brappers I just welded it up.

i no you said u just had a 2' lift kit in the front but did you remove that ?? I just bought a 2' lift for my 570 and really concerned about my axles. right now im still on factory tires but will be buying new tires...

@jodyb91581

6 жыл бұрын

Paul Girard Man I left the front part of the lift on because the bike looked like it was raked in the front without it. I have no lift in the back and 27’s. Polaris will only guarantee the bikes with 27’s and smaller. I have never broke a front axel but I have broke 3 rears. 2 with a lift in the back and one stock.

@paulgirard4727

6 жыл бұрын

thanks for the quick reply . i feel a bit more willing to do this knowing that doing the front only worked great. by just doing the front did your ride height change ? and what settings did you put your springs in the back ? im a heavier guy so ive adjusted mine 2nd from the top..

@jodyb91581

6 жыл бұрын

Paul Girard It did increase the front rod hight a little and my rear springs are on the lowest setting. I’m not a big guy but when me and my wife ride it I increase the compression to about where yours is. That being said I don’t ride it a whole lot other than riding my girls around the house.

@rileymay3556

3 жыл бұрын

@@jodyb91581 hey buddy little late here but all of this certainly didn’t happen at once correct? im probably going to throw 29.5 outlaws like you did on but i’m not looking to blow all these things round the same time period and if your control arm blows wouldn’t some of your other components blow?

@jodyb91581

3 жыл бұрын

@@rileymay3556 yea when my rear exploded it went at the same time. Going up a hill I caught air and was still in it when it landed. Destroyed everything.

Did you tune the fuel injection

@ait8034

5 жыл бұрын

@@jodyb91581 have you had any proplems with it?

Do you have a lift in the back or just front

@jodyb91581

6 жыл бұрын

Atv Adventures Yea it had the super atv 2.5 lift all the way around. I ended up taking the back off and leaving the front on with 27’s because I destroyed the rear differential, subframe, axle and control arms on the left side.

What kind of exhaust tip is that

@jodyb91581

6 жыл бұрын

Atv Adventures Stock modified

Can u send me the link for the wheel spacers?

@jodyb91581

4 жыл бұрын

S.P.Engines™ 864KingOfKings® Sorry just seen your message. I got them off of EBay

Where do you get those tires

@jodyb91581

8 жыл бұрын

Highlifter

It was a super atv

How much does it cost to do it?

@jodyb91581

5 жыл бұрын

Eduardo Lopez I don’t remember the Tires and wheels were like a grand the spacer were like 100 bucks lift was a couple hundred

Did you take all the baffles out of the exhaust

Bump

Hey buddy that machine looks like a killa with those tires. It looks like it means businesses. What does the SP stand for? Forgive the stupid question bud.

@matthewcoibion1

8 жыл бұрын

+William Santiago Comes with power steering

@williammcclain2275

3 жыл бұрын

SP = Sport Package !

@williamsantiago7303

3 жыл бұрын

@@williammcclain2275 Thanks for the info bud. 👍

just get on ebay for wheel spacer