Greetings Mr. R 👋🏼 I had the dreaded P0401 code and wouldn’t go away. I replaced VSV valve, modular valve, cleaned the EGR, and gas cap with no luck! My Dad suggested to remove the Throttle Body and inspect all the tiny orifices drilled near the throttle valve. Found some carbon build up inside these orifices and cleaned them thoroughly with brake cleaner and compressed air. Once cleaned and put together, I drove the vehicle over 100 miles without any issue 😁 Thanks for the video!

@rprojects4553

2 жыл бұрын

You’re welcome! Good luck with your car. Hope my video helped you somehow 😁

@MrCadmus9

2 жыл бұрын

I replaced the vacuum modulator on my 97 2.2L & could hear the EGR clicking with vacuumed applied & released, so, I sprayed throttle body cleaner down the 3 vacuum hose hook up nipples (engine off & very cold) that are basically above the throttle body butterfly plate, using the rigid tube spray can head extender that comes with the cleaner and that got rid of my problem with P041 code. You’d think that as suction openings that they would not get clogged but so much for my thoughts on that! I just had no desire to try getting at that computer controlled vacuum breaking valve that is buried under the engine so I did a desperate thing & it worked out very well with months since then. Thanks

@MrCadmus9

2 жыл бұрын

By the way, on my 4 cyl 97 the hose that connects to the bottom of the vacuum modulator valve is connected to the pipe that feeds exhaust gas up to the bottom of the EGR Valve. It is a pressurized exhaust gas source and not a vacuum source……so if the vacuum modulators internal diaphragm dies and ruptures, does this mean that dirty exhaust gas can get sucked thru it & can get sucked back by throttle body suction to those vacuum nipple supplies on top of the throttle body and block them up or limit adequate vacuum supply? Make up any explanation that seems to fit? So far, no EGR codes since spraying those nipples with throttle body cleaner thru a plastic extension nozzle tube, after replacing the old vacuum modulator. Good luck to you.

@davea5150

Жыл бұрын

Fyi this can also be your catalytic converter is giving you this code. Cataclean in the gas tank is very good to use. I'm at this point now. My problem is trying to get in dash twist and turn sockets for number 74 bulbs. Two are missing from my Camry. And I don't want wild bright LED replacements. Any ideas would be great. Local dealer doesn't have them. Discontinued. What a joke. There's a lot of 4th generation Camrys still on the road.

@rprojects4553

Жыл бұрын

Ok good for you, thank you for information.

This is a very helpful video for a common problem with this Camry model series. Good job tracking down the culprit! Thanks for sharing your trouble-shooting experience.

@rprojects4553

2 жыл бұрын

You’re welcome Anthony and thanks for the compliment. Glad that this video has helped you and others. By the views, I would’ve never thought that this was such a common problem so I’m really glad I could help others.

Thankyou Mr R ,, Im having the same issues with my 97,, I will follow suit and see how it works out for me,, your video is very detailed , Thankyou Ser.

@rprojects4553

2 жыл бұрын

Hey Edwin! You’re very welcome. Thanks for watching my video. I hope it helped you out. Let me know how the fix turned out for you. Have a great day!

Thank you for the advice. Get a sore back from the effort but it is done.

@rprojects4553

2 жыл бұрын

You’re welcome! Glad you were able t fix it.👍🏼

Thank you, for your efforts, it’s people like you makes this world a beautiful place. God keep blessing your endeavors 🙏

@rprojects4553

Жыл бұрын

Thank you, glad I can help.

@rprojects4553

Жыл бұрын

Thank you

Thanks 😊 my 1998 camry had the same issue very informative 👍

@rprojects4553

2 жыл бұрын

You’re welcome Donald! So glad it helped you. Have a great day!

Yes, great, helpful and detailed diagnostic, Thank you

@rprojects4553

2 жыл бұрын

Thank you for the comment! Have a good one!

you saved me I ordered my EGR Solenoid today thanks bro 😁👍

@rprojects4553

10 күн бұрын

Great to hear! Hope it helped you!

For me it was the EGR solenoid to the left of the EGR. Quick easy cheap. 4 hoses no tools needed. $45 at auto parts store, way cheaper on rock auto. Unfortunately I already replaced the egr and vsv.

@rprojects4553

2 жыл бұрын

Well I’m glad you were able to figure that out yourself. I enjoy fixing my own cars and figuring out the problems. Saves us some money! Always a good thing. Thanks for the comment Jake Kelley!

I am grateful for your help. Great job. Thanks

@rprojects4553

6 ай бұрын

Happy to help thank you

Thank you... very informative....Good job, this sounds like I'm going there soon !!!

@rprojects4553

2 жыл бұрын

Thank you for the comment! Hope it helped you!

@rusty29971

2 жыл бұрын

Nailed it !!! VSV valve what a pain in the ass, but got it done !!! No more egr code, and passed smog !!! Thanks again !!!

Very helpful. You’re right It fixed it. Thank you!

@rprojects4553

Жыл бұрын

You welcome, that was my culprit, had I known I would of started there. Some one else it might be a different culprit, but for me I still gained cause I replaced all other parts new, but when I got there it took care of my problem, glad it helped you.

You did a really good job saved me a lot of cash went straight to your coprite 🙂

@rprojects4553

Жыл бұрын

Thanks! I’m glad I was able to help

The gas cap is for EVAP issues - those related to the fuel lines. The EGR is for exhaust gases, totally separate systems.

@rprojects4553

Жыл бұрын

Thanks for info.

Your a life saver, thank you

@rprojects4553

2 жыл бұрын

Welcome

Thank you Mr: R. I am having the same problem with my toyota camry 2001 and I will follow the same process! Good video.

@rprojects4553

2 жыл бұрын

Okay sounds good! Hopefully that’ll take care of the problem. Let me know how it works out!

This is a very helpful video... Thanks a lot!!!

@rprojects4553

2 жыл бұрын

You’re welcome! Glad the video helped!

I went through the same problem, they caused smog test failed in CA. I had only two weeks left to return for retest after initial Fail for high NOx. I replaced the EGR valve and the solenoid module although both were working fine. I also replaced the transducer and cleaned the EGR temperature sensor. It failed again when retest. I watched more KZread videos and then the guy said you must cleaned all EGR passages, they were likely clogged up with carbon. Yes, they were 80% clogged up. Specially, the small vaccum hoses and the metal pipe connected to the EGR valve. Most cars built before 2000, EGR valve operated by vaccum suction design.

@rprojects4553

2 жыл бұрын

Yah I had cleaned my EGR out also and it didn’t work so I ended up replacing the VSV. Took a while to figure it out but finally got it. Hope your diy fixed your problem. Thanks for the comment!

@SoldierOfChrist316

Жыл бұрын

@@rprojects4553how do you clean them?

@rprojects4553

Жыл бұрын

You could get EGR cleaner at auto store or get W40 and spray holes .

@SoldierOfChrist316

Жыл бұрын

@@rprojects4553 ok thank you brother

@rprojects4553

Жыл бұрын

Welcome

Thankyou mate great video

@rprojects4553

Жыл бұрын

You welcome

thump up well done, thank you for sharing

@rprojects4553

2 жыл бұрын

Hey Samuel, appreciate you checking out my video. Hope it helped!

Thank you your wounderfull to explain things 65 year old woman and I'm trying to fix my own car

@rprojects4553

Жыл бұрын

Welcome

@rprojects4553

Жыл бұрын

Welcome

Great video!!!

@rprojects4553

2 жыл бұрын

Thanks Cameryn for the comment! Appreciate it😁

I had same issue and couldn't get old VSV off, so I just left it and mounted new one to firewall. It doesn't seem to matter where it's mounted.

@rprojects4553

2 жыл бұрын

As long as it did the job, right?!👍🏼

THANK You SO MUCH!

@rprojects4553

2 жыл бұрын

You’re welcome! Hope it helped you!

Good work bro

@rprojects4553

Жыл бұрын

Thank you

Good job bro thank.

@rprojects4553

2 жыл бұрын

You’re welcome! Glad it helped you

Thanks that is good information .

@rprojects4553

Ай бұрын

You’re welcome

Ty for the information

@rprojects4553

Жыл бұрын

Welcome

Great job. I forgot about those lol.

@rprojects4553

Жыл бұрын

Thank you

@rprojects4553

Жыл бұрын

Thank you

Nice Video, You're lucky with only 1 code, My 01 with 250K miles have like 7 or 8 codes on already; Glad I live in FL, we don't care about issues like that here. Lol

@rprojects4553

10 күн бұрын

Oh wow!😂

I had a check engine light coming on a 1986.5 Toyota Supra: It coded that an exhaust sensor was faulty, but when I got a new on put on, the check engine light still came on with the same code. Someone suggested I clean the mass air fuel sensor with some Chemtool spray--sure enough, that did the trick and I could then smog it. So the part I replaced might not have been the exact cause for the code.

@rprojects4553

Жыл бұрын

Good for you buddy,sometimes it could be something else , but usually , the main culprit is part I changed after replacing all other parts, good job.

good job

@rprojects4553

2 жыл бұрын

Thanks! Hope it helped you!

I totally appreciate this video b/c the Haynes manual doesn't show the location of the VSV, however, I'm a little confused as to its location. You said the bad VSV was under the EGR in front of the rear motor mount mounted to the engine, but when you show the location with the wheel off, it looks like you're showing it in the front of the engine. Please just confirm the location if you'd be so kind. Thanks

@rprojects4553

2 жыл бұрын

The VSV is located in the rear of the engine, in front of the rear motor mount. It’s a little to the right of the motor mount. Thanks for the comment and hope that helped!

@rprojects4553

2 жыл бұрын

Also your hoses that go to your EGR connects to it so that might be an easier way of finding it

Thanks ❤

What is the name of the valve on the side where you removed the hose?

Nice video! A co worker gave me a 98 camry. 250,000 miles. Runs awesome. Had a power steering leak, and the key ignition was bad so ya couldn't start it. I installed a new one. Cleaned the car up. Tires are good, brakes are good. It has a check engine light. Where did you get ur code reader and that part at the end of the video that's hard to get to?

@shajivarghese2102

2 жыл бұрын

The last part he changed is a vacuum switching valve. If you take your car to Auto Zone they will read the codes for you for free. You can also buy a code reader (scanner) from Auto Zone as well. Prices vary from $75 - 150 depending on models/brands/features.

@rprojects4553

2 жыл бұрын

Hi Wayne! I borrowed the code reader from my son and I believe he got it from Amazon and the same goes for the part. I try to go the cheap route as much as possible but if all else fails I have to get one from an auto supply place like Autozone or O’reillys. Hope that helped!

I have this issue right now two years ago i saw this video and recently changed the vsv behind the engine and that made the code go away. This time i replaced all 3 parts and cleaned the tube that is connected to the egr valve and the vacuum lines. Idk if the issue is more in deph. Or what

@rprojects4553

Ай бұрын

Hi thanks for the comment. It shouldn’t be more of a problem than that. Just make sure you check all the hoses that connect to the vsv and egr, that they are not loose but connected on there tightly. Hope that helps! Have a good one!

Okay sir so What changed so that the check engine light stopped coming on?

You're just throwing parts at your cart to see which one is the one that is faulty, you must first test the part to see if it's working properly (trouble shooting) before replacing it like you just did with the vacuum modulator!

I clean the egr valve cause it was good,replaced the egr modulator and vsv too and I’m still getting the engine ligh on saying it’s P0401,please help!

@rprojects4553

Жыл бұрын

Did you replace the one behind the engine vsv and did you plug them in correctly. Also check your gas cap. Let me know.

Do you have a video on how to access the VSV? Edit: you showed that just after I sent this message.

@rprojects4553

2 жыл бұрын

Okay. Glad it helped you!

@Maplecook

2 жыл бұрын

@@rprojects4553 I'm very grateful! Cheers! =)

My 1997 Toyota Camry has the code p0401 I disassembled the egr valve, cleaned it with throttle body cleaner, deleted the code and did not turn on the check light again until 3 or 4 days after the code reappeared, I think that too I'll have to change the vacuum solenoid.

@rprojects4553

2 жыл бұрын

Juan Suarez hope it turns out good for you. I also went through all those diagnosis but the valve was my last resort and thank God it worked! Let me know how it turns out for you but in any case, hope my video helped you somewhat. Have a great day!

@juansuarez6167

2 жыл бұрын

@@rprojects4553 thank you very much I changed the modulator and the VSV but the code reappeared, just last Saturday I realized that the P and R vacuum ports that are connected to the EGR modulator were totally covered, I proceeded to disassemble the throttle body and uncover those two ports, I hope that is the definitive solution to that problem, since Saturday until now the check light has not appeared again.

That code can be many things. I also bought the modulator and it didn't do anything. Engine light came back on. So I went and changed the vacuum switching valve, then turned on the car and check engine had disappeared. Plugged the code reader and no codes. came back clean. So far I've driven it more than 200 miles and no engine light. so I'm pretty happy about that. I also bought other sensors that i haven't changed yet. I have yet to replace the EGR Valve (which i know i can clean and put back, but rather change to new) and the throttle position sensor. my car has over 180k miles so it wouldn't hurt to change them. I also am going to buy another sensor/valve to have all of the emission valves new at that point.

@rprojects4553

2 жыл бұрын

Glad it worked for you. That’s what I had to change, the VSV and same thing, no more check engine light or codes! Well hope this video helped somewhat. Have a great day!

@trawwilson400

2 жыл бұрын

my car won’t even start up but i got a brand new Alternator and stater and battery and i also replaced my fuel pump but that same code popped up i don’t have money to go to a shop plz help 😩

@kingdomcome7450

2 жыл бұрын

@@trawwilson400 Did you try and replace that vacuum control valve? It says on his description that that is what worked for him

@trawwilson400

2 жыл бұрын

@@kingdomcome7450 no i’m waiting for it to come in i just ordered it

@rprojects4553

2 жыл бұрын

@@trawwilson400 Sorry for the confusion. It’s the vacuum switch valve. It should take care of the problem. Let me know how it works out for you!

I need to change that sucker this weekend 😩

@rprojects4553

18 күн бұрын

Good luck , hope you get to it

so the 2 hoses that connect to the VSV are the one coming from the back of the modulator and the other one comes from the top of the egr valve right .

@rprojects4553

Жыл бұрын

Samuel, yes that’s right.

Toyota buenos carros

@rprojects4553

Жыл бұрын

Muy cierto si.

@rprojects4553

Жыл бұрын

Yes they are, si muy buenos.

What’s the name of the last part when you remove the tire?

@rprojects4553

9 ай бұрын

Hi. Can you be more clear, pls

My 1999 Camry jerks while accelerating and will stall at idle. I also have to pump the gas pedal to get it to start and keep it running. I replaced the EGR valve and only had the P0401 code that I cleared after replacing it but can't drive it 10 miles.

@rprojects4553

Ай бұрын

Ok , sometimes when cars do that , might be that there is not enough fuel going in , could be your gas filter is plugged up or your fuel pump is not working properly and going out, Check your fuel rail on top of engine , on it it has a valve like a tire does like if you are going to put air on it, put glasses on then push it to see if there is pressure if none your fuel pump is going out or plugged up fuel filter 3 rd if your car drives fine and suddenly shut off could be your crank shaft sensor. Hope it helps.

@siknessgaming7305

Ай бұрын

@@rprojects4553 Thanks for the reply. I was able to drive it some today and it continued to act up. And I was able to get the check engine light to come back on with the same code. Would the VSV cause this problem?

@societyreborn33

13 күн бұрын

Sparkplugs and coils might need replacement, could have a misfire

@siknessgaming7305

12 күн бұрын

@@societyreborn33 Ended up being the crankshaft position sensor.

@rprojects4553

12 күн бұрын

If it is stalling on you while driving, check your fuel pressure to see if there is any gas’s coming out , if it’s good and have gas pressure, then try replacing. Crank shaft sensor, when they go bad they do that , won’t start or turns off on you.

Mine was the evap canister that caused that code

@rprojects4553

10 күн бұрын

Oh okay. Well hope you were able to fix the problem. Have a great day!

Could it be by chance your Upstream sensor 1

@davemac8494

2 жыл бұрын

My bad you're right

@rprojects4553

2 жыл бұрын

Yah this is what fixed the problem for my Camry. Hope the video helped you!

On my car cheak engine light its not (on) even the EGR not installed But señor its take more fuel if thts EGR not installed Or somthing will happen Mucho gracias 😘

@rprojects4553

2 жыл бұрын

You’re welcome

@ahmedpires5427

2 жыл бұрын

@@rprojects4553 no inteligencia with U about what i said to U

@rprojects4553

2 жыл бұрын

Can you be more clear? I don’t understand what you’re trying to say?

@ahmedpires5427

2 жыл бұрын

@@rprojects4553 on my car there's no EJR vacum also the engine light its off There is problem will be if no ejr ?

@rprojects4553

2 жыл бұрын

Yah, I would think that would be a problem whether or not you have a check engine light on or not. Best bet would be to look in a car junkyard and see if there’s a car like yours and if it has an EGR or not.

Hey thank you for this video I m just bought a 2001 Toyota Camry and I have a problem with the check engine light on and when the car is cool and I start up the car starts with the rpm way to high, what do you think it could be? I’m not a mecanic but I like to work on my cars, I’m appreciate your coments

@rprojects4553

Жыл бұрын

It could be your throttle control sensor. Or check the cable that goes from your pedal to the throttle it might need some DWD lube on it , or there is a adjustment screw in that area that you can adjust.

Just finished watching the video… this guy just told us the VCV will be the culprit. 😂 any of those things could’ve been the culprit, but instead of diagnosing it you threw parts at it until something worked. One of which wasn’t even a part of the EGR system (gas cap)

@rprojects4553

Жыл бұрын

You are right, I had to change every part that pertains to that code, ended up wasting money on them, when I discovered VCV I went and re placed it, it solved my problem, I put it on here to hopefully help some one, With same code, that they don’t halfto waste money and do what I did. It helped me , and hopefully help some one else.

@loden888

Жыл бұрын

I'm throwing parts at my EGR problem too. Replacing vacuum hoses as well, but my car is 24 years old and not many things last 24 years in a hot operating environment without going bad.

@Tiy11

7 ай бұрын

Does anyone know what causes your car to keep cutting off?

@Tiy11

7 ай бұрын

I’m thinking egr valve or the vacuum

@Tiy11

7 ай бұрын

Let me know in the comments

It's easier to remove the instrument cluster and pull out the check engine mini bulb

@rprojects4553

9 ай бұрын

Ok thank you

I have a 2000 Toyota camry p0401

If the car is running good ignore the code if not then pursue.

@rprojects4553

6 ай бұрын

Yea if it s time to smog car you half to address code cause it won’t pass smog with The code or check engine showing.

13:42

@rprojects4553

Жыл бұрын

?

I had a dead short in the VSV. Replaced it with a new factory Toyota part. Cars is as smooth as a babys ass now. Dont buy aftermarket.

@rprojects4553

Жыл бұрын

Good to know that. Thanks

This is not uncommon problem. And my route was change a ceramic resistor for a place in the instrument cluster.

@rprojects4553

2 жыл бұрын

Glad you were able to troubleshoot yours. Yes this is unfortunately a common problem with these cars. That’s why I put up this video. I think it’s so important to share this knowledge with every DIYer. Have a great one!

but you temp coolant is half way

@rprojects4553

2 жыл бұрын

Sorry, I couldn’t understand what you were trying to say😬

@JuanMorales-ks4ll

2 жыл бұрын

@@rprojects4553 about the collant temperature gauge

@rprojects4553

2 жыл бұрын

@@JuanMorales-ks4ll okay thank you

Did you through Parts at it until you figured it out that's not diagnosing

@rprojects4553

9 ай бұрын

Yup some f bombs too!

I question this guy, calling bolts, screws.

@rprojects4553

Ай бұрын

Yah it happens😅

It's a bad idea to randomly put crappy parts on your Toyota without doing a proper diagnose. Note Dorman parts are considered junk by the top notch KZread mechanics.

Говори по русски, ничего не понятно!

@rprojects4553

Жыл бұрын

Sorry but I don’t speak Russian

@user-se1ly5sx6c

Жыл бұрын

@@rprojects4553 Да я шучу, всё в порядке. Не понятно что говорите, но понятно, что делаете. У меня у сына камри из Америки, занимаемся еë востановлением. Всего вам доброго, спасибо за видео!)

Desespera hablando tan lento y con el amm

@rprojects4553

Жыл бұрын

Is that good or bad?