Nice walk-through. Thank you. I especially like that you are treating the wood with mold resistant primer. Most van builds we see don't even discuss it.

Thanks so much for this idea. I had it built in my van. Works great! One of the best things is that is easy to remove if u need to haul something big in the van.

I have about four feet of snow on the ground. It was finally above freezing today. Love watching your build! And I love your dogs!!!

i am looking to buy a van for a conversion and this footage here is pure gold, thanks a lot guys!

Thank you so much for this video. That's exactly what I was looking for. Since I don't intend to live in my van, I wanted a bed that I could remove easily when not camping so I could use the van for other stuff also. This is the best solution !

@EncompassAdventure

3 жыл бұрын

You're welcome! So glad it was what you were looking for. It's been a life saver being able to take it out and work on the van, as needed.

Brilliant!! Thanks for sharing!

I’m really enjoying your videos. So many other van fit out videos are full of hype and light on the actual detail. You’ve gone to so much trouble to put these together and they are fantastic. I can’t wait to start my own and your channel is certainly going to be my go to source. Keep up the dad jokes Woody.

I have learned a lot watching this video; thank you.

Loved this video...So much great and detailed info...Gonna make that exact bed

Thank you so much , Ill be doing this with my sprinter

Nice one!!!!, thanks from Australia.

You guys a are a nice couple, enjoyed your video and thought you did great explaining your steps. We just finished our bed plat form too. Love van builds.

@EncompassAdventure

3 жыл бұрын

Aww thanks so much! You're so kind. Van builds are the best!

Brilliant I gonna do same with my new van

Molto bello, bravissimi!!! 👍🥰

Love your content! Been watching a ton of your videos, great job!

We have dogs as well and trying to get ideas to build a bed without legs being in the way. Thanks for the video and information on product parts & supplies. This was super helpful .

@EncompassAdventure

3 жыл бұрын

Oh good, we're glad it was helpful! We've got to make sure our pups are comfortable too. 😊

Fantastic video. Very informative.

THANKS! You made my life so easy. High 5!

@EncompassAdventure

3 жыл бұрын

Oh good!! So glad we could help. *high five* 😊

Nice "off the shelf" solution, haven't seen anyone else do this. Easy to quickly reconfigure. Ikea!

@EncompassAdventure

3 жыл бұрын

Yes, our thoughts exactly! Great minds think alike! Thank you. 😊

Well done. Thanks for the video

@EncompassAdventure

3 жыл бұрын

Thanks for watching! Hope it was helpful! 😁

If we were doing a platform bed we would for sure be doing this! Good job yall!

@EncompassAdventure

4 жыл бұрын

Hey thanks!!

Excellent idea! Great job thinking to put holes in the board to allow airflow an prevent mold under mattress, etc.

@EncompassAdventure

3 жыл бұрын

Thank you so much! We had heard a few horror stories about mold in vans and under mattresses and definitely don't want that. 😬 Thank you for watching! 😊

Thank you for posting this!!! I was about to use 2x4s as the span for my bed, now im off to Ikea :)

@VanSheGoes

2 жыл бұрын

Hi, did IKEA give you the mounting hardware? They told me it only comes with a bed purchase which makes no sense

@rachelpontarolo8578

2 жыл бұрын

@@VanSheGoes You call Ikea and they will send them to you for free. That is what I did. I learned that trick from another person posting on KZread.

Very nicely explained.thanks.

@EncompassAdventure

3 жыл бұрын

Our pleasure! Glad we could help and thank you for watching!

Great job you did

@EncompassAdventure

3 жыл бұрын

Thank you! 😊

Great Idea! Thanks this what I need it. Going to IKEA soon for it.

@EncompassAdventure

3 жыл бұрын

Awesome! There is a link in the description of this video so you can order them online and then have them ready to pick up. 😊 Make sure to get the brackets too, they add them for free, you just have to ask. Happy building! 😊

Awesome. While I knew about the Skorva beams I wasn’t aware of the FREE mounting brackets. So I picked some up at my local IKEA store. I’ll be putting them into my Ford Transit. Thank you! Maybe I missed it but just a reminder for anyone drilling holes in your van you should also paint the holes to prevent rust.

@EncompassAdventure

3 жыл бұрын

Oh wonderful!! I'm happy you got them! Win!! 😊 Thanks so much 🥰 we did actually paint them, just didn't show it and it's white paint so it's hard to tell. You can kind of see it at 12:02. Very good point though! Always paint the bare metal to avoid rust. 😊

Absolutely love y'alls videos! Inspires me to get one of these to go on adventures with my wife!!!

@EncompassAdventure

4 жыл бұрын

Hi Donovan! Thanks so much for watching, we're glad you're enjoying them. :) Honestly, I (Shelby) knew I wanted a van but needed to get Woody on board so we decided to rent one from Outdoorsy.com and went camping for a weekend. Needless to say, Woody fell in love and here we are. We highly recommend renting one for a couple nights, just to try it out. Even if you don't end up getting one, it's a really fun experience. :)

@donovanpiper320

4 жыл бұрын

@@EncompassAdventure fabulous idea!!! We will definitely do that! Great way to try it out and see if it is for us. Thank you and looking forward to yalls future videos!!!

@EncompassAdventure

4 жыл бұрын

No problem! We hope you enjoy it. 😁

thanx for the video you all have some good ideas . I did notice that your 2x6 bed wall frame was level while parked in your drivway is it level parked on level ground being most driveways hav 4% slope .I loved those braces tho im going to use them on a set of bunk beds im biulding thanx an keep it up

Awesome video!! Great idea with those telescopic beams 👍 we built our bed out of 2x4s and fence brackets 😂

@EncompassAdventure

3 жыл бұрын

Thank you! We really like how it turned out. Hey, whatever works!!

Buen vídeo 👌 gracias.

@EncompassAdventure

3 жыл бұрын

Thank you! 🥰

genius ! THANK YOU!!!!

@EncompassAdventure

3 жыл бұрын

Our pleasure and thanks for watching! 😁

we did a really similar bed - love it!!!!

@EncompassAdventure

4 жыл бұрын

Oh awesome, are you glad you did? Is it working out well? And thank you. 😁

Nice!

Hey guys ...greating from Clewiston, Florida Thank you for the video on your platform 👍👍👍that make it very easy to make the structure I'm currently looking for a promaster my self René 🌴🌅

@EncompassAdventure

3 жыл бұрын

Hi René! 👋🏼 Greetings back to you from Utah! Welcome and thanks so much for the kind words, so glad we can help! Promasters are pretty great too! I believe they offer the widest options and straightest walls, out of all the vans, which should make your build a little easier! Best of luck and we hope you find exactly what you're looking for! Cheers! 😁

Great bed idea. Love the telescoping rails. So versatile! 💖

@EncompassAdventure

3 жыл бұрын

Hey thank you so much! We're glad you liked it! 😊

Instead of the similarly priced but much more labour intensive plywood, you could use the IKEA LURÖY bed slat system. I don't know why everyone doesn't use the Skorva/LURÖY combo for their van beds. Thanks for sharing and planting seeds for all those that follow!

Nice job

@EncompassAdventure

3 жыл бұрын

Thank you! 😊

Thank you for your video I was about to lose my mind and get special made frame and bracket costing me a silly sum of money .

Hey Ya'll. just wanted to say Thanks again for this super simple bed idea. I bought 3 of the frame rails with brackets ( $60 total ) and used 1/4" plywood across them and a 10" memory foam mattress... My Border Collie Stella and I sleep soooo well on this platform. 2009 Ford e250 Super Duty Van. 2 Lithium batteries and Starlink Dish attached on the back corner. A 3000 watt Renogy Inverter. MaxSpeedingRods diesel heater , 400 watts solar on the roof and 2 roof vents ( 15" x 15" ) with 12v fans. 27" Smart Tv and 2 - Wyze 360 Cams on the front and rear roof areas. a 12v fridge/freezer combo and single induction stovetop. This is a dreamy Nomad Van and in total I have spent $5500 Cdn dollars to be able to live OFF GRID up to 5 days at a time and run EVERYTHING without issue. My last trip into far north I spent 11 days off grid and used my Honda 2000watt generator to re charge my batteries and power stations ,,, and had the BEST trip ever. it ALL started with the IKEA bed rail plan , so 🙏 Thank You for the idea Capt Vantastic - and Stella

@EncompassAdventure

Жыл бұрын

I love to see it! Sounds like you have a pretty cool setup there, you should be really proud of! I know how much work it can be. A Starlink Dish and a 27" Smart tv huh? I'll have to look into that one for my own van! Thank you so much for sharing your build here for us and for others to pull ideas from. Safe and happy adventuring to you and Stella!

@SailProMarina

Жыл бұрын

@@EncompassAdventure I'll make a video for you guys. As far as the Starlink , it's amazing ... I bought their Pivot Mount base and attached it to the back corner. It uses very little power too,, at First just using a Jackery 300 watt power station it would run the Starlink for 12+ hours. Then adding the 2 - 180amp hour Lithium Batteries and solar panels on roof , It keeps me going for 2-3 days totally off grid ! I learned most of my renewable energy skills from Will Prowse KZread channel , he's brilliant ! I have a 30' Sailboat ⛵️ as well that is my summer home. Now with my Land Yacht , i'm set to live free year round and rarely am at home .....

Greetings! Thanks so much for your videos. With two tiny kiddos, the research and planning process for a Sprinter build is extra overwhelming, and we've gained so much clarity and confidence from your videos, along with finally finding THE bed design for us! I just had a couple of questions on your bed build - which size riv nuts did you end up using for the 2x6 attachment to the wall? And after some time with the bed in place, how's your build holding up? Would you go back and do anything differently? Thanks again!

Thanks guys I really like this construction. Simple and efficient. How much working time did it take in total if you exclude the waiting for parts to arrive?

Love the idea using the telescopic beams. How have they held up for the last year?

For holes in the plywood use the holesaw from 1 side for 1/4 deep then finish from the other side then you end up with a much neater hole

On a step drill bit, use a black indelible marker to mark the drill width JUST AFTER the width you want to stop at, that way just drill until the "painted" ring touches the metal, push more lightly as you get to the final ring to drill through... For large structural items, use PLUSNUTS over RIVNUTS as they put more MEAT behind the sheet metal for a stronger hold. TIP for "finding" rivnuts behind a panel you want to put up: grind the head off a few bolts sized for the rivnut, and make a point on the end. Now just thread in those to have the point stick up just a bit, and position your panel, then PUSH it into the rivnut to mark it and take down and drill from the back using those marks! The only issue here is that with the stock SKORVA mounts, you can't have the mattress extend into the wall cavity for tall people to sleep transverse since the bracket mounts ABOVE where the SKORVA attaches... To get around that, just buy some bar stock STEEL to use instead of the SKORVA stock mounts, and cut it long enough to allow room for the SKORVA to slide down in, and for a bolt on either side to hold it to the wall. Just put a washer BEHIND the bar at each hole, and this will create the gap you need for the SKORVA to slide down into it for support. This makes the SKORVA attach at the TOP of this bracket, and leaves you free and clear to extend your mattress into the wall cavity for maximum transverse sleeping length. In that case, I suggest Home Depot DUCT INSULATION against the outer walls, it has a sticky back, foil front, and comes in 15' rolls for around $22 and is R3 insulation value. Then skin over this with 1/4" plywood to lose only about 1/2" of van width... In my new build I'm just starting, I'll be doing the first "shower in a drawer"...

Those Ikia beam supports must be the best thing since sliced bread for the camper converter , simple fab idea amazed you found them, Im UK based & checked the online AKIA and yes we can get them in the uk Phew ! . Just a few idea s from myself , the bed plywood base i would cut a centre line joint not offset which would equal maybe less movement between you rather than underneath one of you (pinched mattress covering ) and lastly im a big boy not in the Victori Secrets weight range & i notice your hubby is kind of hunky sized , So im questioning are three beams enough because if that bed drops its dog burgers for dinner that night Lol ! for the price of 4 x beams $$$ Stronger even more mount the side clips with washers nuts and bolts on the 6 x 2 wood before mounting on the van sides / not just screws . For other builders purchase double the amount of side metal clips with one set mounted lower for when just going on local trips when all the gear is not required under the bed , so for the price of 8 x extra clips you will have a dual position bed . Happy following you guys keep up the good work.

@EncompassAdventure

3 жыл бұрын

Yes, since sliced bread! 😆 We have links to all of the products in the description of our video for Ikea or Amazon but they're cheaper at Ikea. Glad you're able to get them there! Just make sure you ask for the mounting plates too and they should give those to you for free. The actual Ikea house beds come with 3 beams so we figured it would be enough but you could definitely add another if you want the extra support! We've have both of us and both of our dogs on our bed and haven't had any problems (one of our dogs is a 160 pound Great Dane). We put at least one bolt and locking washers in each of the mounting plates, along with screws but you could probably do what you said going all the way through the wood with bolts and nuts, depending on where the 2x6 is mounted on the van. Also, your idea of making it extra versatile and using extra mounting plates to adjust the bed for a quick trip is pretty cool! Very creative! Thank you so much for watching and happy building! 😊

Simple, easy, and economic. 😂

This is great! Do you screw the IKEA rails to the mattress base?

Thank you. This is exactly what I was looking for!. Could you just clarify what washers you were using on the bolts that go into the riv nuts? Thanks

@EncompassAdventure

3 жыл бұрын

Hi there! So glad it helped and thank you for watching! The washers we got are locking washers from Home Depot. We use them for basically everything. 🙂

your video is excellent. Could you tell me what size of wooden strip I need to use please? I'm about to make a bed in my Mercedes sprinter. I hope your help please.

👍👍👍👍👍

Awesome! I want to some tools now ..Thanks a lot ..⚒️😢🤣 Ratchet comment. 🤣🤣

@EncompassAdventure

3 жыл бұрын

Treat yourself! Our jigsaw and circular saw just weren't cutting it anymore (pun intended 😋) so we upgraded a little. They're not fancy or anything but they make things a little easier. Hahaha good catch on that comment! 😁😆

Where can I buy the metal nut rivet crimper and the nuts? Haven't found anyone that sells them. And oh what a great idea for stability. Thank you!!!

@EncompassAdventure

3 жыл бұрын

Hi there! We bought ours on Amazon and put the links in the description of this video. Thank you so much for watching, glad you liked it. Hope this helps! 😊

Hey guys, thanks so much for the idea, but I would have liked it better if I was presented with the finished product first so I could see if I wanted it prior to watching you build it. I fast forwarded it for that part.

@barbarafarrington7146

3 жыл бұрын

Still have not seen this product.

@EncompassAdventure

3 жыл бұрын

Hi Barbara 👋🏼 thanks for the input. Maybe we'll put a time stamp in the description so people can go right to that point if they want to see the finished product first. Thank you for watching and happy building!

I wish I had known Ikea would give the brackets at no charge. I paid almost as much for that brackets as I paid for the rails themselves. I bought them on ebay.

Hi there, wondering if you love the bed beams. Are they sturdy? Thanks for sharing your journey.

@EncompassAdventure

3 жыл бұрын

Hi there! Thank you so much for watching. We are loving them so far. We're still building out our van but have taken it out camping about 4 times and haven't had any issues. 😊

Great idea and great video! Thank you for sharing it. I went to the IKEA website and, as with all things - there are some mixed reviews about the strength of the brackets. How have they held up for you guys?

@EncompassAdventure

3 жыл бұрын

Thank you for watching, glad you liked it. 😊 They've honestly been great so far! We haven't had any problems. We actually had some in a bed in our house awhile ago too and they worked well.

@johngayder9249

3 жыл бұрын

@@EncompassAdventure Awesome! Thanks for the quick feedback. I now plan to use this idea on our build.

Nice design! May I ask how much everything (hardware) cost? Thanks!

How high did you mount the boards? We have Irish Wolfhounds so similar size to your Great Danes? Also, what are the IKEA supports?

What part IKEA part number is the adjustable bed frame and the brackets? Be useful info for lots of us no doubt. Thanks

Great idea thanks for sharing! Now that you have the bed in for sometime, have you encountered any rough rattling or have any concern of the bed popping of the brackets while on bumpy roads since the Ikea telescoping frames are not directly mounted to the wood support beams but are laid loosely in the brackets? Any thoughts on how one would lock the bed assembly to the support beams anyone...

@EncompassAdventure

3 жыл бұрын

Hi there! Thanks for watching! We haven't had any problems as of yet. We're still building out our van but have taken it camping multiple times. There are little holes in the tops of the beams that we utilized with a bolt and wing nut to secure the platform wood to the beam to keep the wood from sliding, when stopping. Otherwise, the weight of the wood and mattress keep the beams down. If you wanted an additional security measure you could screw in some L brackets underneath the bed, from the wood platform (that the mattress sits on) to the wood on the wall/wall of the van. Hope this helps! Happy Building! :)

@curtise7

2 жыл бұрын

Might be real late to the party on this one but you could get some wood shims and slide them into the mounting bracket where the support beam hooks on. This would ensure a very snug fit so there would be no rattling.

What size rivnuts did you use to mount the bed to the van wall?

What is the weight load I’m a big guy do you think I would have to put a post for support

Hi I like the bed idea. I am going to ikea to buy the supports but what is the part that screws on the wood? Does it come with the rails? Thanks

@EncompassAdventure

3 жыл бұрын

Hi there! Thank you so much, we're glad you like it. All of the part numbers and links are in the description box of this video. We provided Ikea and Amazon links, whichever is easier for you to purchase from. The metal mounting plates do not come with the telescoping rails but Ikea will give them to you for free if you ask. Hope this helps!

Hows the bed and the side of the van holding up with the bolts where they arE?

Hi guys, loved your extended bed frame from IKEA...what's the name of it please as I would love the same idea in our sprinter? Great conversion , Andy from England.

@EncompassAdventure

3 жыл бұрын

Hi! 👋🏼 Thank you! We put a parts list, with links, in the description of this video. Hope that helps and please let us know if you have anymore questions. Happy building!

My sprinter is passenger version. I am thinking to drill a hole on the plastic wall covering above frame between windows and install IKEA mounting brackets . Do you think there are matching size rivet nut for the Ikea bracket? And how many nuts are needed per bracket?

@EncompassAdventure

3 жыл бұрын

There are many sizes of rivnuts for different needs. The pack we got came with multiple sizes (big and small). Just make sure you're putting them in something that is secure enough to hold your load. As for the mounting plates, that the beams secure into, we screwed those into the wood that was being held up by rivnuts. We didn't put rivnuts directly into the mounting plates. I'd test it first and if it works and you're happy with it, go for it. Hopefully, that helps! Happy Building! 😊

are those self tapping bolts/screws

Lo único que no me queda claro la herramienta para poder hacer el hueco y la herramienta para poder engranpar esa rosca en la lata de mi furgoneta. Vivo en Amsterdam y no se como conseguir esos materiales. Pero tu idea está súper buena de la cama.

If not do you have the part number?

This is the simplest, lightest and most space efficient bed frame solution - love it. Out of curiosity, why did you install to those boards instead of riveting the brackets directly to the van wall?

@chelovd123

2 жыл бұрын

yeah, I had the same question. I'm starting mine and doing it directly to the van walls

@EncompassAdventure

2 жыл бұрын

@pete's b-roll Thank you! I'm so glad you love it. 😊 We attached it to the wood, instead of the van walls because we raised our bed higher than the metal support beam that goes horizontally down the middle of the van. If we had attached the skorva beams, to the van walls, at this height, some of them would only have been attached to the 1 metal sheet of the van wall and the rivets would have gone through to the outside and that didn't seem as secure or efficient. We also did the bed before we put any insulation in or the shiplap and instead built those things around the 2x6's. I supposed you could insulate and do your walls, before the bed and secure it that way if you choose to. This way just worked out better for us. Hope this helps and happy building! 😊

@EncompassAdventure

2 жыл бұрын

@Marcello Villagomez Diaz Hi there! Great question, I just responded to Pete's comment. Hope this helps and happy building!

Thank you guys, liked your video and the idea of that ikea beams, however, I would like you to improve on your camera, it swings a lot and I couldn’t even finished the video because I get soooo dizzy.

Hi can I please ask what size rivets you used ? Thanks

What size mattress fit in there? Or did you have to custom cut something?

Awesome! I'm going to use this same system in my ProMaster. Do you know the part number for the support brackets for the Skorva support beams?

@anner6342

4 жыл бұрын

Also, would you be so kind as to give a parts list? I was actually taking notes through your video and I'm questioning the 3/8 Riv nut as you said that you weren't using many of those. The drill bit info was awesome too and for the quality finish you got, worth getting. I want to bolt the wood into the Skorva slats for increased safety in the event of a crash or something. Can you drill through these do you think. Great video of the details!!

@EncompassAdventure

4 жыл бұрын

@@anner6342 Thank you so much for watching, we're glad we could help! We've put a parts list together and put it in the description of the video. Yes, I do think you can drill through the Skorva support beams. We also plan to do that and use some of the pre-drilled holes as well and are going to use a wing-nut on the bottom to allow for easy removal when/if we need to. You're welcome to message us on IG as well (@encompass.adventure) if you have any more questions or want to bounce ideas off of us.

Just curious where did you get the telescoping beams?

Where’d or what are they called those adjustable dad supports for my IKia I tried to find them on their website and I’m having no luck

@EncompassAdventure

3 жыл бұрын

Hi there. We have links and information on them in the description of this video. You can get them at Ikea or on Amazon, we put links for both. They're called Skorva bed beams. Hope this helps! 😊

Is there any reason you opted not to use the existing holes?

Normil garage. My house would fit in there.

Hey guys! Any feedback on the ikea supports being noisy when driving ?

@EncompassAdventure

3 жыл бұрын

Hi there! The handful of times we've driven with the bed up, we haven't noticed any noise coming from the Ikea supports. We think the weight of the wood and mattress on top, help with that too. Once we're done with the build, we're going to attach the Ikea support beams to the wooden platform, with screws and wing nuts to prevent sliding. We can definitely do an update video once we're done with our van build and have driven around more but so far, they've worked perfectly. Hope this helps and thank you so much for watching!

Hi...thanks this is great...one question: you mentioned that IKEA provides the brackets for free; how did you obtain them?

@EncompassAdventure

3 жыл бұрын

No problem, glad you liked it! You have to call them or go into Ikea and ask for them. You can also buy them on Amazon (we put links in the description of this video) if that's easier but then it's not free. Hope this helps!

@glendasmith7480

3 жыл бұрын

Wonderful video of bed setup. Keep on sharing progress!

5/16-22 bolt everywhere for those I cannot find 5/16-22 . Can anyone please give me an idea where I can get those?

Hi guys, what is the size of the rivnuts you used? And what's the size of the holes made with the step drill bit? Thanks :)

@EncompassAdventure

3 жыл бұрын

Hi there! We used 5/16 rivnuts and 5/16-22 bolts. For the step bit, I think we drilled up to the 1/2 inch measurement shown on the bit itself. I think different brands of rivnuts can require different sized holes. There are charts that show what size hole you should make depending on the size of rivnuts you use, we would suggest referencing those beforehand too. Hope this helps! :)

Nice video, however I went to Ikea and purchased these beams after seeing the video and asked for the mounting brackets only to be told the hardward comes with a bed purchase or check spare parts which was the never ending return line, no thanks I'll stick to plywood. I had to order the beams out of state and had my daughter pick them and no brackets after all these hoops, a little frustrating, now I'm gonna return them whenever she feels like going back in the store to return them, this would've been such an easier bed build

@EncompassAdventure

2 жыл бұрын

Hi there! 👋🏼 Just wanted to say first and foremost, thank you for watching! For the brackets, we had to call and they sent them to us through the mail. Or, you may be able to order them through their website, not sure on that one though. The part number is in the description of the video. You can also buy them on Amazon (they're not free that way, unfortunately) but their is an option to purchase them. That link is also in the description of this video. So sorry you're having trouble getting them. Best of luck and Happy Building!

@VanSheGoes

2 жыл бұрын

@@EncompassAdventure Prayer works my friend, my daughter waited in line, unbeknownst to me, and spare parts gave her the hardware. I'm grateful for your response and God granting my want

What size are the rivnuts?

I recently ordered the rails from IKEA and they had no idea what I was talking about when i mentioned the brackets. I even provided the number for them and they said they didn't have such a thing. This was IKEA in Plymouth Meeting PA. I should have tried other stores. I ended up purchasing the brackets off amazon. : (

Are you able to post a link to where you got the metal beams from?

@EncompassAdventure

3 жыл бұрын

Yup, all of the links are in the description of this video. Hope this helps! 😊

You didn't want to do your wall panels before putting up the bed?

what is the name of the tang

Came out great!! Do you have a link to the metal bed frame? Thanks

@EncompassAdventure

4 жыл бұрын

Thank you so much! Here is the link for the Ikea piece: www.ikea.com/us/en/p/skorva-center-support-beam-galvanized-90124534/

What is the name of the tool you used to put the plugs in the metal

@chrisfs150

Жыл бұрын

They are captive nuts... Use a captive nut gun to fit... Sometimes called riv-nuts, hence use a riv-nut gun... Or you can often do it with just a bolt done up tight with a spanner to pull them in

Seppos need to start using Celsius

Can you please advise for folks to wear safety goggles. It was bit scary warhcing you look down using the graduated drill bit. Ta

If you are gonna drill huge holes in the plywood, then why not just use IKEA wooden bed slats?

@mishafrog8786

3 жыл бұрын

Maybe bed slats might rattle or even move around when on the move , think i prefer a solid base overall. Plus easy to move out when carrying big items.

@EncompassAdventure

3 жыл бұрын

Hi spacegreycoralred, yes exactly what misha frog said. Plus, we ended up building a bedside storage box on the side of our bed using the plywood as as the bottom of it. The metal beams aren't spaced for the wooden slats and it would be difficult to secure the wooden slats without drilling a lot of holes into the metal beams. We actually have an Ikea bed in our house with the mwtal beams and wooden slats and have nothing but issues with the slats sliding around. Plywood is much more solid and secure. Not saying you couldn't make slats work for you, it just wasn't what we preferred Hope this helps!

how much did the van build cost you total?

@AbbiRose-wx8iy

3 жыл бұрын

And also, with the rib nut tool thing you have, do you think it is worth the buy even if I will never build anything other then the van?

@EncompassAdventure

3 жыл бұрын

It was worth it to us because it made it way easier to install the rivnuts. I know some people use a wrench and kind of make a homemade one. I've seen a few videos on it. 🙂

@EncompassAdventure

3 жыл бұрын

We're still building it out. We've definitely been taking our time and pretty much took the winter off from working on it. 🥶 The cost differs for everyone. It all depends on your layout and what types of materials you use.

hello thank you and warning ¡¡ use googles for safety from Mëxico

Woody…you are going to lose some fingers if you keep putting your hand by that saw guard…please be careful

you forgot to paint the holes you drilled from rusting get iob you two

@EncompassAdventure

4 жыл бұрын

Thanks so much 🥰 we did actually paint them, just didn't show it and it's white paint so it's hard to tell. You can kind of see it at 12:02. Very good point though! Always paint the bare metal to avoid rust. 😊

To the misfortune of humanity, planned obsolescence, that is, the waste of valuable resources and many of them unrecoverable and many impossible to recycle, is an unbreakable rule for the benefit of the great corporate capital that owns the world's resources to the detriment of mother earth and the entire humanity that between moans decays hopelessly in sight, American cars are programmed to fall apart as quickly as possible with the least possible effort so that they are as expensive as possible

Cordless power tools the worst. don't buy that shit..lol

@EncompassAdventure

3 жыл бұрын

Haha, you're not wrong! We were using a friends cordless jigsaw for the first little while (which we were grateful for) but we decided to just get our own corded one instead. Night and day difference!