Very nice video you have explained with very basic simple practical explanations I have never seen such a clear video with such explanations. in future we all request you to keep sharing such excellent video.
@jose941978 Жыл бұрын
Truly detailed and precise explanation
@heshammatoug4860 Жыл бұрын
Hi Gouri We need you to explain to us how to inspection test plan for valves Thanks 🙏
@CarlosAndresRomeroToscano Жыл бұрын
Excelente video. Muchas gracias
@rajeshmavia5424 Жыл бұрын
Thank you so much sir.. belated teachers day wishes. For bigger size valves, how we lift weight and test will be done in larger test benches ah sir?
@aghilmoghbeli7626 Жыл бұрын
Very good video
@akurathinaveenkumar6 күн бұрын
Can you please send the drawing of air-hydro test bench... please
@rajeshmavia5424 Жыл бұрын
Pneumatic pressure 5.5 bar is mandatory sir? Or we can go beyond or reduce this pressure level
@ajay_constantineАй бұрын
Sir during the seat testing shouldn't the valve be in horizontal position? Because even if there is any tiny leak which is in the acceptable range we could identify it easily?
@gourisankarsamanta7670
Ай бұрын
Yes
@raviv9157 Жыл бұрын
Dear Sir, Why gland bolts are loosed incase of hydro testing which is not going to do when valve installed in the line in the industry?
@gourisankarsamanta7670
Жыл бұрын
Gland bolts are loosened only during backseat testing to ensure that there is no leakage through the gland so that at site when the valve is under operation, gland packing can be removed or replaced without closing the valve.
@shika-ri5 ай бұрын
Sir , as per API 598 during shell test valve shall be partially open but your valve is fully open , can you explain why?
@gourisankarsamanta7670
5 ай бұрын
During valve body or shell testing, valve can be kept partially open or full open. Requirement is, valve body and bonnet should be pressurize together.
Пікірлер: 15
Very nice video you have explained with very basic simple practical explanations I have never seen such a clear video with such explanations. in future we all request you to keep sharing such excellent video.
Truly detailed and precise explanation
Hi Gouri We need you to explain to us how to inspection test plan for valves Thanks 🙏
Excelente video. Muchas gracias
Thank you so much sir.. belated teachers day wishes. For bigger size valves, how we lift weight and test will be done in larger test benches ah sir?
Very good video
Can you please send the drawing of air-hydro test bench... please
Pneumatic pressure 5.5 bar is mandatory sir? Or we can go beyond or reduce this pressure level
Sir during the seat testing shouldn't the valve be in horizontal position? Because even if there is any tiny leak which is in the acceptable range we could identify it easily?
@gourisankarsamanta7670
Ай бұрын
Yes
Dear Sir, Why gland bolts are loosed incase of hydro testing which is not going to do when valve installed in the line in the industry?
@gourisankarsamanta7670
Жыл бұрын
Gland bolts are loosened only during backseat testing to ensure that there is no leakage through the gland so that at site when the valve is under operation, gland packing can be removed or replaced without closing the valve.
Sir , as per API 598 during shell test valve shall be partially open but your valve is fully open , can you explain why?
@gourisankarsamanta7670
5 ай бұрын
During valve body or shell testing, valve can be kept partially open or full open. Requirement is, valve body and bonnet should be pressurize together.