Hi Guys, Thanks for watching and for all your support. Here are the links of all prints from this video. Cheers www.myminifactory.com/object/3d-print-109295 - Giant Eagle www.myminifactory.com/object/3d-print-little-red-riding-hood-and-her-new-best-friend-90492 - Little Red Riding Hood www.myminifactory.com/object/3d-print-mimic-96893 - Mimic www.myminifactory.com/object/3d-print-seraphim-angel-heaven-hath-no-fury-32mm-scale-111123 - Angel Heven www.thingiverse.com/thing:862724 - Medieval Castle www.thingiverse.com/thing:271769 - Tower of Pi www.myminifactory.com/prints/3d-print-alien-xenomorph-full-figure-25-cm-17605 - Alien www.fatdragongames.com/fdgfiles/?page_id=2751 - Dragon miniatures

@dr.olavomendes-corp.6211

3 жыл бұрын

Is the car charger okay?

@NexiTech

3 жыл бұрын

Car charger?

An added benefit of a huge build platform is the ability to print different iterations of a design all at once. Would be especially handy when printing 'useful' items that need to fit (items with threads, to be cast, etc). Can print the size you think you need, then several more, each scaled up 1%. One of them should account for the inevitable resin shrinkage. Big time saver.

Man I love your channel ,if anyone wants an accurate honest review you can't go wrong.

Great review, Nexi Tech. I ordered mine last week and can't wait to try it out.

Always check your build plate before you print in case a piece of cured resin is stuck to it. Because, on the next print, the build plate with crush this remnant piece into the FEP vat liner and your precious LCD mask plate, possibly doing much damage. Also check the resin filled vat for large cured chunks hidden in the uncured, liquid resin.

Nexi as always impeccable description from Argentina!

I bought the Photon based on your review. Great recommendation. Thanks!

Worth the 2000 USD price... Great review btw... keep it up... and stay save...

Endlich ein Gerät mit ansprechendem Druckvolumen und eine tolle Vorführung.

@NexiTech

4 жыл бұрын

Mad Max English please.

I've been looking for a machine just like this, but man, I'm gonna have a time convincing the missus it's necessary! I really love putting tons of detail in my models and using fibermesh hair, but as a great as my delta is, the amount of finish work to get my figure models ready for a cast is getting to be debilitating in time, resources and creativity, not to mention the detail lost versus the source model. You nailed it on the price, but if these come down to like sub 1K in the next year (preferably sooner!) I'll be on one like a hobo on a ham 'sammich!

I also used the exact same ventilation for my resin printer ^^

Your reviews are amazing.. I'm just getting started and need a 3d printer that can print as big as 500mm. Not super expensive, and works well.. I would really appreciate your opinion of a recommendation on which would be a good 3d printer to get ..

Impressive printer Thanks for sharing👍😀

@NexiTech

4 жыл бұрын

Asger Vestbjerg Thank you so much for your comment.

hello! superb review , i just want to ask you , i have issue with my transform , failed print and always stick to the fep film , what should i do to correct this issue ? thank you

Great review, thanks.

@NexiTech

4 жыл бұрын

Ron M And thank for your nice comment. Take care

@ronm6585

4 жыл бұрын

@@NexiTech You take care as well Nexi and thanks.

Hey Nexi! First, I love your channel and I have a TronXY that I managed to make work thanks to your videos. I love this resin printer but I have a couple of questions if you dont mind: -What is the maximu volume that you can print? because I feel that the maximum printable is the maximum that the tray can hold? Can you refill that during the print? I am looking for something where I could do moulds for functional carbon fiber parts so the build volume is kind of important. Thanks a lot! Guille

@NexiTech

4 жыл бұрын

Guillermo Tebar Hi Guille and thanks for your comment. I'm glad that my videos was helpful to you. Maximum print volume is 290x160x400mm. Tray can fit object(build plate) of 290x160mm size and the LCD is big enough to cure the entire surface of the build plate.Yes you can refill resin during printing or open enclosure door any time you want. I never tried to make any molds with this machine but I have seen resin online that are ment to be use as cast resins. Best regards Nexi

Do you have more details, a video, of how the ventilation if fitted to the window?

@NexiTech

4 жыл бұрын

Protomaker Black Sprint Original 3D Printer I used foam from the packaging box and I cut out the peaces and fit it around the window while I cut out only place for ventilation end housing. It's not permanent ventilation solution and it does not look nice but it does the job temporally and it was very effective.

I would highly suggest adding the supports manually. Chitubox's automatic support generator adds WAAAY more than you need, you could probably get away with 1/10 of the supports you need not only leaving fewer support nubs on the print (so higher quality finishes), but also using a lot less resin on prints like the alien figurine. There is special software out there that can show you if you missed any needed supports.

@NexiTech

3 жыл бұрын

I agree. For the beginners that could be a bit problematic but for experienced makers adding supports manually are the way to go. Saving resin, saving time for removing supports and also getting a better print with less scars. Thanks for your comment.

@Vandel212

3 жыл бұрын

@@NexiTech Could be a good video idea. It's not really all that difficult, so even beginners could pick up on it easily enough.

thx for the review, do you think its possible to replace the funs with better/silent ones?

@NexiTech

4 жыл бұрын

cosmic1969 Thank you! Sure, why not, this printer uses standard size cooling fans.

Looks great, but why do most of these companies think the USB in back good? Please put it in front. Or at the very least on the side! Of course since it has WiFi, that was good move. Not sure if you did this. But those fans probably don't have a lot of CFM power. So that long of a vent hose will really degrade how much air is actually being pushed. I would add larger or 2nd fan at the other end of your vent hose so help move the fumes away. That is what I do for my resin printers.

Hi Nexi, Is this printer has higher up grade? Is it good for small businesses? :)

can someone help me and just let me know how print quality compares between the form labs 3 and the phrozen printers ? especially this one here tested and the 4k series .thx a lot

Is this printer has higher up grade? Is it good for small businesses?

Great review - I have the same printer and just learning how to use it. I really want to print the Xenomorph Alien that you did - I’m wondering how you set up that print- did you hollow it or is it solid? The model is very complex and I can’t find a nice place to put any drainage holes without ruining the model. The thighs, chest and head all end up with cavities that don’t connect, but I really don’t want to have holes in all those parts of the model. What app did you use to slice it, and would you be willing to share the sliced file?

@NexiTech

3 жыл бұрын

Thank you very much! Glad you like it. I just read your comment. Let me try to found my slliced Alien File. I hope that I have it somewhere...

@stevewong6956

3 жыл бұрын

@@NexiTech great thanks! If you’re willing can you share that sliced file? Figure it would print on my Transform if I just use my resin profile.

@NexiTech

3 жыл бұрын

It took me some digging but I finnaly found it and I upload it to one of my drives. You can download it from this link: drive.google.com/file/d/1h-4Y-mFVrPa_s1nEyh221Bm5r8SR156t/view?usp=sharing P.S. Open it from the Chitubox slicer. Good luck ;)

@stevewong6956

3 жыл бұрын

@@NexiTech Great - thanks for this! The file is big and slowing my Mac down but I hope it can work...

how do you clean these machines? also can you design a toilet style ballcock system that autofill's the print tank when low?

@NexiTech

2 жыл бұрын

You clean it like any other Resin 3D Printer. Interesting idea, printer is huge for sure there is place for it.

Excellent

@NexiTech

4 жыл бұрын

Chair Happy Thank you!

ooooh nice.👍😷 Why are the bases warped?

@NexiTech

4 жыл бұрын

Gary Graham Thanks! Well that was my fault. First I printed the base hallow and some liquid resin was trapped inside of the print. Then I place that base print in sealed plastic enclosure with other prints next to the heating element. One Mimic print laterally cracked and the base wraped. Thankfully I was able to clean other few smaller prints from leaked resin but I could not bend the base back without cracking.

@GaryGraham66

4 жыл бұрын

@@NexiTech ah I thought it would have been a modeling error rather than the printer, it does take a while to learn the software and get the results you are aiming for. Great video. Oh and thanks for the CR10 videos they really helped. 👍 keep safe my friend. 👍😷

Base of models does not look flat... 14:19 for example needs propping up here

@NexiTech

4 жыл бұрын

Protomaker Black Sprint Original 3D Printer Well that was my fault. First I printed the base hallow and some liquid resin was trapped inside of the print. Then I place that base print in sealed plastic enclosure with other prints to protect it from dust but I place it next to the heating element. One Mimic print laterally cracked open and the base for wolf end up wraped. Thankfully I was able to clean other few smaller prints from leaked resin but I could not bend the base back without cracking.

Nice, could you review the elegoo Mars?

@NexiTech

4 жыл бұрын

Diego Alonso Thanks for suggesting, I try to get one for review video.

Hope you are fine ! We miss you

@NexiTech

3 жыл бұрын

Thank you for your concern my friend! 3.5 months ago I finally brought a house, which is pretty old and it needs alot of work and investment, also my wife and I got a second child so we are bit in chaos right now. I hope I will finish with necessary house renovating until end of September and then I'm back on KZread :)

@Ary-vs1lm

3 жыл бұрын

Happy to hear from you. Good news!! A new baby and a new house. What else ? ;) Waiting for you to come back soon and safe

What settings can I use to get more detail? 🤔

@NexiTech

4 жыл бұрын

Gustavo Alfaro Lower the layer height from 0.05mm to 0.025?

Where can we see you painted models??

@NexiTech

4 жыл бұрын

Unfortunately I'm not artist, so I will not paint models for now. If I menage to found someone who will I could made a another quick video about it.

Super cool but super make my wallet cry

STL files for the models?

@NexiTech

4 жыл бұрын

Thomas MÜLLER I will add them all in as soon as possible. I will replay you again on this comment when it's ready. Thanks for your comment.

@NexiTech

4 жыл бұрын

Hi Thomas, please check the first pined comment for prints STL.

Neat. But if you buy one, stock up on replacement screens while they're still available. At full print size, you're going to be swapping out LCDs on average every nine prints.

@JohnJones-oy3md

4 жыл бұрын

@H D 400 hours LCD lifespan divided by 44 hour print

@NexiTech

4 жыл бұрын

John Jones I'm sorry but I think that's wrong. That 44 hour print time(Alien) is total print time including time between layers. Lets do a quick math: Standard Curing time is 6 seconds, Alien figure had 7940 layers. That means 7940x6= 47640 seconds. 47640/60= 794min/60= 13.23h. So actually LCD exposed time under UV light is 13.23hours and that is if you print full 400mm scale model in very hight print quality. Lets assume that average life span of LCD is 400hours. So 400h/12.23h= 30.2 prints, printed at full 400mm scale at hight print quality (0.05mm layer heght). So you should able to print around 30 Aliens figure at Max print size before LCD start to degrade and it needs replacement.

@Info-Centras

4 жыл бұрын

@@NexiTech very expensive pleasure, only 400h life span of LCD. I think need new generation LCD.

@innomind

4 жыл бұрын

This 400 hour LCD lifespan is like flashbulbs in early photography. Nothing beats FDM in longevity.

Mine did NOT come with resin. So anyone who buys this make sure it does or buy more with it.

How long were the prints? Sounded like 44 hours for the alien but only 3 for the angel? (My ears are bad, not you’re English btw ;)

@NexiTech

4 жыл бұрын

Brogz007 Print time for the Angel was 30h and 31min. No problem my friend! Thank you for your comment. Cheers!

where is the affordable version of this with super high print quality?

@OiDepp

4 жыл бұрын

Elegoo Saturn is coming. not the same sice, but much cheaper

Why’d I watch a whole video on a 60000 dollar printer

@beermanuk

4 жыл бұрын

$2000 - 60,000 TWD to USD = 1,981.63 US Dollars