"You can do anything with a Dremel and will power." That's the best line that I've heard this month. And so true, too.

@pokegeaks2

3 жыл бұрын

Pain is temporary, glory is forever

@AKStovall

3 жыл бұрын

that needs to be on a T-shirt

@marksadler4457

3 жыл бұрын

And Duck tape/duct tape

@GoldenEagleXTND

3 жыл бұрын

A very apt statement in the gun world as well hahaha

@michaelhughes9278

3 жыл бұрын

can i get rid of my wife with a dremel and will power?

Me: who needs a case that large? Jay: and here is the extra screw kit Me: I will never buy from another case manufacturer ever again

@evdaman

3 жыл бұрын

P500 comes with one too, though I'm not sure there's extra if you fill it out completely

@atcpadi1

3 жыл бұрын

Dude right?!?

@cdante13h

3 жыл бұрын

I thought I was the only one.

@CorruptIgnition8

3 жыл бұрын

Honestly why I recommend everyone who is building for the first time to get a Phanteks case.

@MikeKitchenman

3 жыл бұрын

I have a 4ish year old Phanteks Enthoo Evolv ATX. They've been amazing, the couple times I contacted support. They just sold me 2 front panel USB Assemblies (Mine's flaking out, which can happen) They had them and they were only 20 bucks each.

"there's not a whole lot to talk about with this case" Jay, the video is 17 minutes....

I remember in my younger years I wanted the biggest case I could possibly get.. just because. There's no way I'd have been able to afford half of the hardware that could go inside it, but I was sat there drooling over the CM Cosmos and a bit later the Obsidian 1000D. Now I have an NZXT H1 and couldn't be happier with having such a small system. Times change :)

@martinhogan9745

3 жыл бұрын

That's funny, since I'm the opposite. When I was younger I wanted smaller cases, so I could carry them to LANs easier. Now I want the biggest case I can get, so I can work in there easier without constantly cutting my hand on stuff. The HAF X and O11 XL have been amazing for building computers.

Jay, do some more case reviews. Because you’re so honest with them, I hope a Phanteks rep has a chat with their teams about the front IO.

@ReptileKing999

3 жыл бұрын

personally not had any issues with the FP on mine yet and it is using the same flip up design, I completely understand where jay is coming from however I dont think that is something the target audience would experience very often if at all, jay made the point of some wireless adapters are a little larger but even then most of the time you would want those in the back of the case unless you move around a lot and have separate systems with only one set of peripherals but even that is going to be few and far between, my point is that phanteks is unlikely to change this as it takes away from the very clean face of the cases and I think that that is the type of audience they are targeting, people who care more about aesthetics than the usability as minor as it may be.

@GamerDad1987

3 жыл бұрын

You could also get a short USB extension cable to use for those devices that don't fit.

@Sylttia

3 жыл бұрын

@@GamerDad1987 I think its the sole fact that you even have to consider going that route in the first place that turns people off from this kind of front panel IO. Which is understandable.

@thealien_ali3382

3 жыл бұрын

My evol X is brilliant

@christophervanzetta

3 жыл бұрын

@@ReptileKing999 Mine either and I also don't have to worry about dust accumulation, which can lead to shorts, due to the front I/O being on the top like some other cases

Hi Jay, Just thought I'd add my scenario that I am currently in for the dual systems one case. My partner and I share the office space, and we don't have a lot of space in the room for two computers full of hard drives. So to cut down on space, I use a dual system case for our rigs. I know I am probably an isolated scenario, but I just thought I'd add to the conversation. Cheers for the overview!

@markjan186

3 жыл бұрын

I do this too, but with a massive 1000d with 2 full gaming systems w/ 8700k and 1080tis under water. I tell myself it's for space but I just really like how it looks.

@robertcurran170

3 жыл бұрын

That's a smart way to get everything that both of you want in less space. Seems like a win win .

@robertsmith3476

3 жыл бұрын

it seems like two itx or matx cases would be smaller then this single case. if desk space was a problem i would go the 2x itx case route

@robertcurran170

3 жыл бұрын

@@robertsmith3476 That is another way to do it for sure. There may have been a specific reason for it

@gunjamed93

3 жыл бұрын

that is actually a great idea!

Definitely one of the first case reviews I’ve watched all the way through. This thing is so versatile, it’s definitely going in my next rig

Jay: Dual system builds for Streaming Me: Uses 2nd system to host game servers.

@xXDeltaXxwhotookit

3 жыл бұрын

I'm thinking workstation and gaming rig

@thelife_ofmike

3 жыл бұрын

That's actually a genius idea

@MrHrannsi

3 жыл бұрын

@@xXDeltaXxwhotookit Now, that's what I call a cunning plan.

*When you remember the Red Dead Redemption case and wonder what happened*. Hope you didn't lose interest, but you must have.

@seanthompson6720

3 жыл бұрын

i think he said it was scrapped because it just was not working

@bwood6337

3 жыл бұрын

@Wang Computers Irrelevant Comment.

@Incognito-gh5qi

3 жыл бұрын

The post malone build took like a whole freaking year Hopefully its just on hold and he gets back to it, even if it takes a lot of time.

@Incognito-gh5qi

3 жыл бұрын

In the meantime if you like case modding and putting computers into odd choices for cases, Tech by Matt has some cool videos, he built a computer inside of a Gamecube

@eteryah

3 жыл бұрын

@Wang Computers games amazong,online sucks

Oh wow, I just built my first PC last week with the Enthoo Pro case. Really enjoying it so far.

@joshuahulce5630

3 жыл бұрын

i've built 3 rigs so far in the enthoo pro. its a great case.

I have this case and I absolutely love it. I don't see how any manufacturer could do better. The only way I can see myself using a different case is if I make my own custom build from scratch, designing and machining everything myself to fit a specific theme build.

i got the first pro and i love it especially the ease of opening side panels. it also has a bunch of space for drives like dvds

Recently built a pc and couldn’t have picked out parts without your help

@tom.bostock

3 жыл бұрын

Facts.

Me: Well, I need to get something done before I go to bed. Time to be productive Jay: **Video posted 20 minutes ago** Me: 👀

@darrelllane8353

3 жыл бұрын

This is me right now

@psychorabbitt

3 жыл бұрын

Me: I need to be productive. Jay: *posts new video* Me: You son of a bitch - I'm in.

Jay: "I like big cases and i cannot lie" Sirmixalot nods approvingly.

@eliyot5126

3 жыл бұрын

approving lie

"You can do anything with a Dremel and willpower." -#Jay2020

Watching this and eating some A&W at the same time, best combo.

"there was a pro, and this is the 2" Quality content

I have been waiting a long time for a build in the 719, this will do fine. THANK YOU!

That Ourburst made my day! DUDE! You're Epic. The review was spot in too. I'm doing my first build, and I'm buying this case. Your reviews helped me pick out 90% of the things for my build.

Jay: Power-efficient designs, GPUs consume less power... nVidia: Hold my beer.

"you can do anything, with a Dremel and willpower"🤣🤣🤣

@tom.bostock

3 жыл бұрын

Nice quoting 😂

@RNDev666

3 жыл бұрын

Words to live by

@worldfamousgi86

3 жыл бұрын

You can even buy a second case!

@kh_trendy

3 жыл бұрын

Best line in the video 🤣

I have the P600S - amazing case, and I loved the unboxing experience and the little boxes with drive cages

I've been having a battle in my head for years - Is my next rig a Gaming machine or a Solidworks Machine?! I guess if we are playing fantasy, I'd build a machine with ATX Area as a Solidworks Rig, and the ITX as a Gaming Rig. Both would be linked to a trio of 16:10 monitors for maximum productivity or maximum immersion. You could easily YOLO this further but I've decided to stay somewhat realistsic... £5000 realistic, excluding any Watercooling. ATX Rig - CAD/Solidworks CPU: Ryzen 9 3900X Cooler (Air): be quiet! dark Rock Pro 4 Motherboard: Asus ROG Crosshair VIII Hero ATX Memory: G.Skill Trident Z Neo 3200 (4x16GB) Storage: Samsung 970 Evo 1TB & Western Digital Black 4TB (RAID'd as required) GPU: Quadro RTX 5000 (So you can put a Waterblock on it if need be.) PSU: Silverstone Strider Titanium 700W ITX Rig - Gaming CPU: Ryzen 7 3700X Cooler (Air): Noctua NH-L9a-AM4 Chromax.Black Motherboard: Asus ROG Strix X570-I Gaming Mini ITX Memory: G.Skill Trident Z Neo 3200 (2x16GB) Storage: Samsung 970 Evo 2TB & Western Digital Black 4TB (RAID'd as required) GPU: RTX 2080 Super Gigabyte Windforce OC PSU: Revolt Pro PH-P850GC (Seems you need this specific one for the second system!) I've spec'd air coolers as any Water Loop would be custom and that not an area I'm familiar with. You could have two loops, one per system, or, so long as you had the same blocks, have one parralel loop for the two systems. I'd try and network the ITX Rig via a high speed network card on the ATX rig, so there was no need for WiFi.

@Depl0rable10

3 жыл бұрын

Just wanna say, sounds cool as fuck. But I think running the loops in parallel sounds like a bad idea to me. You'd always have to be running both systems in that case, even if it would look badass

"What would you do with this case?" Well since i host most games for my friends and the party size varies often from 4+ to 12+ we pretty often require our own server. so within reason having a second system already running dedicated servers acting like a DIY mini server with something like Linux running on it would be pretty handy. Beyond that you could potentially just connect 1 single monitor and have both inputs send to the same monitor and with a switch in between its simply a flick of a button and you'd switching back and forth. The benefits would be near equal playing field for everyone because both system although they are next to each other the connect would first end up at the router and then return again thus still creating a bit of latency. As example, If people out there ever played Pummel party 8+ and you'd host a game you'd literally have no latency as host, thus your reaction times are much better then your friends which would technically be a unfair advantage. But you can always negate that by simply saying "Get gud bro".

@beringerergo1298

3 жыл бұрын

Dedicated server is what i thought of using it for too

@MushokuThing

3 жыл бұрын

With the amount of storage spots available, a cheap RAID controller and make a media system as well.

@nova5224

3 жыл бұрын

I got a corsair 1000D and the second system is mainly used for game servers, its also used for couch gaming in another room and a racing sim because my main system lacks enough outputs for everything I want. Playing on the couch is fine in 1080p for the games I play and racing games are fairly light so don't require a beast of a video card. But 99% of the time its either a server or just media streaming to the tv.

@CarGuyCole360

3 жыл бұрын

That's exactly what I thought when I saw the vid

@martinkrol2840

3 жыл бұрын

got something like that running in the enthoo 719 but you have to realise before setting up something like that that itx mobo's usually only contain 2 ram slots and a lot of gameservers are pretty ram heavy to run. which means you'd only ever run one dedi ar at best 2 at any given time (saving up for a 2u rackmounted server now to replace my itx server for that reason).

"This case makes Linus so " (STOP! STOP NOW! NOOOoo) ... orny... You and Linus are a hilarious Set of Motortruckers. Thank you for being who you are.

@whitepawrolls

3 жыл бұрын

It was the packing he was talking about not the case in that comment :)

I’ve recently become a Phanteks fan, so I was excited once I saw this videos title and thumbnail.

Nice case. I have the Phantex Evolv X ‘Edit’ fixed the power button and now works fantastic. 😎

Wow, I guess you'd need to be a real *Enthoosiast* to buy this case

@b0xf0x13

3 жыл бұрын

Go to your room and think about what you've done.

@shalekendar6759

3 жыл бұрын

Boo. Hiss.

@NewLondonMarshall

3 жыл бұрын

👏🏻

@theblueraven5147

3 жыл бұрын

Stage hook has entered the chat

@larryconley9690

3 жыл бұрын

Where can I find this case at cant find it

"It's got all the features, though it's maybe not a premium as the Enthoo 719." Still glad I went with 719 when I did, on sale ahead of this case's release. It was only $40 more than the Pro II cost, and I got to have it 3 months earlier. Your review of the 719 had a lot to do with that decision. I too ended up hugging it. :)

Thanks for this. I was having trouble figuring out where to mount my water cooler system (first time installing one too).

I just got my 719! Love it!

"What would you put in this case?" A Raspberry Pi...

@alygboy

3 жыл бұрын

Why not?

@thenotsojollyroger8406

3 жыл бұрын

you wont do it... =)

@bwood6337

3 жыл бұрын

By the time you finish paying for the case that's all you'll be able to afford.

@denesk2794

3 жыл бұрын

@@psycho-nutkase9233 too much power ... Arduino pro mini it is ...

@denesk2794

3 жыл бұрын

@@bwood6337 $140 USD is not a bad price. I am shopping for a case and I am around the 150-200 US range where I am happy with what I see ... Just my 2c ... my current cases are Corsair and NZXT and they weren't cheap either.

Take "usb extension cable" (from aliexpress, costs some cents) and you will be fine to plug any device in front usb's :)

@2Syndras1Cup

3 жыл бұрын

Good advice and its cheap but doesn't change the fact that I have to put in my time/money in order to fix a stupid and outdated design choice.

@KOT-ANGRY

3 жыл бұрын

@@2Syndras1Cup Im using the same design: Phanteks Evolv X case! One of the best so far - very happy with it!

Jayz always does his best when he focuses on the high-end and Enthoosiest side of things.

Just got my Phanteks eclipse p600s today for my first build, it looks great.

Please do a dual system with full custom loop in the this case. That shit would be so dope.

When you mention "Phil keeps filling up drives", are we gonna be seeing a Server/PC NAS in the future for the office/studio?

I have been using the Enthoo Luxe with Tempered Glass for close to two year now. I love it. The design is slick, integrated RGB, plenty of space, cable management in the back. It was my first gaming PC built piece by piece and I am glad I started with this case. When my friends are getting new PCs/Case, I always recommend Phanteks.

Because of your Enthoo Primo review way back when, I transplanted my rig into the primo. Its got to be the best cases Ive ever used.

5:27 Is that.....a 5.25" drive bay?! 5:33 DAMMIT!!! It's just a bunch of ports with a cover over them.

@trevorwilliams3501

3 жыл бұрын

@edmunds tomsons Dammit. These modern cases are starting to infect me. I meant 5 25". Lol. Lemme correct that.

@jaewonhwang3716

3 жыл бұрын

They do sell an accessory mount for the 5.25" drives, called ODD Mounting Bracket or something. It mounts near the front, but it faces out the side, meaning that you need to open your case anytime you want to access the drives to insert a DVD disk or whatever. I'm not entirely sure how it affects the clearances with the radiators, but I would assume that you wouldn't be able to put a 480 radiator on the side or the front anymore.

@trevorwilliams3501

3 жыл бұрын

@@jaewonhwang3716 That sucks. Open the case every time? Bah!

@IR0NxZ

3 жыл бұрын

The original Primo has 5 5.25 bays, kept mine through my last 3 builds now as there just isn't anything suitable on the market like it anymore. It's housing a 480 rad, 360 rad, 140 rad, Eatx mobo, bluray and dvd burner, 6x 3.5" drives, 2x 2.5" drives (can fit another 4), 2x HDD hot swap bays. My only problem with it is that the IO is on the top of the case which is super impractical due to it needing to live under a desk due to its size.

Jay: Full tower cases kinda dying Me: 🙃 Moving from big case ( thermaltake view 71 ) to even bigger one (Raijintek Eris Evo)

Planning a build in this now. Glad you had this video because having a good "walk around" the case really helped me see the layout. Lower System - encoding system/editing AsRock B550 Phantom itx AMD Ryzen 7 5700g Noctua NH-L9a chromax Corsair Vengeance 2x16 (32gb ddr4 3200cl16) 2x 2TB Crucial P2 nvmes Elgato Cam Link Pro (pcie, with vert-riser) Elgato HD60 S+ 4x 5TB Barracuda 2.5" sata drives (raid 10 bulk storage) Top System - Gaming AsRock B550 extreme4 AMD Ryzen 5 5600x Sapphire Nitro + RX6800 2x 2TB Crucial P2 nvmes Corsair Vengeance LPX 4x8 (32gb ddr4 3200cl16) Arctic Freezer II 420 Both systems powered by Phanteks Revolt PH-p1200ps P12s throughout for air flow. I will be going with the nonglass side panel. Nothing flashy.

I really want to see you building a full water-cooled dual system in this case

Famous last words "You can do anything with a Dremel and Willpower"

"not sure why you'd need dual power supplies" *Linus appears with a Threadripper 3990x and dual 3090s in SLI... Or Linus's "$100,000" computer with 6 quadros, and dual 28 core Xeons, he had two 1600W power supplies and they were being stretched pretty thin.

I'm having Enthoo pro tempered glass since three years and i still love it. Great air flow, space and quality

I think this may very well be my next case!!

10:29 I don't think having a two PCs for streaming was about a performance hit to the game but a issues with the *STREAM* stuttering, pixelating, dropping frames, or lagging out, especially if you're streaming to more than one platform. Also a lot of people have multiple audio inputs and video inputs that necessitates having to manage it all on another "Streaming PC" so you can easily transitions or activate, with out having to pause the game, alt-tab out to OBS, to make any changes to the stream. It's also easier to trigger events like video clips when people follow or sub to your channel while you're streaming.

@asterysmgaming9912

3 жыл бұрын

Yeah...I definitely think he missed the mark here. Secondary streaming PC is definitely preferable, and can be very important for some games.

Well this is gonna be my next case for Ryzen 9 might be named : All Might.

I'm still using my enthoo primo white. I have a custum loop with a 480mil radiator in the top, the pump and hard drives are mounted in the front. I put the gpu vertically and now the case look full enough while still retaining an almost minimalistic look. A fine line to walk. Love my case.

That's an impressive case, tons of features.

If i had this case I would do a his and her pc for me and my wife so that way we can game together

"GPUs don't nearly create the heat they used to..." You can tell this was before the RTX 3000 announcement

@samhor33

3 жыл бұрын

Thats true actually, my 3090 never exceed 68c when I'm gaming.

@latenight6815

3 жыл бұрын

@@samhor33 nice you are a gamer too?

I watched the enthoo primo review in early 2018, I made a dual socket system in it in late 2018, I water cooled it with a top mounted 480mm radiator in early 2020. I can confirm that the OG Phanteks case is sick to build in, and even all this time later I would still love to see a Jay build in it.

I actually purchased this case as I wanted to move away from the NZXT H700i and run my home server in it as well as my main system. I. Love. It. Got to get the parts to assemble my server (mini itx) now.

Phil keeps filling up his drives because after recording for 4 hours there is only 10 min of usable content. So get Linus to build Phil a unread server to store all the bloopers.

@shanejohnson5318

3 жыл бұрын

Damn you MobileChaos, you stole my entire comment. Yes what he said, with the caveat that the Enthoo is not for P0rn. Actually with the Enthoo name do a Dr Suess themed build.

@whitepawrolls

3 жыл бұрын

Petabyte v3 server? I could see that ending well after watching him build the first 2. :p

@mobilechaosyt

3 жыл бұрын

@@whitepawrolls You know a video is only good if someone breaks and catches on fire.

Duel System huh? Challenge: One system for gaming: AMD Second system for streaming/editing: Intel Do you accept Jay? Well do ya? Hmm? If you build it, oh nvm...

@cdbtheclaw

3 жыл бұрын

Why would you go with AMD for gaming and Intel for streaming/editing? That is exactly the opposite of the strengths of the brands. I hope this was just a joke that went over my head.

@joshtheking1772

3 жыл бұрын

@@cdbtheclaw why do you think I chose it that way? I know its the opposite.

@g2gmedia745

3 жыл бұрын

IT'S TIME TO D-D-D-D-DUEL!!!

@scottyhaines4226

3 жыл бұрын

@@cdbtheclaw I'd probably do the streaming and editing with Intel if it's an Nvidia GPU. The Fast Sync or whatever it is helps lower render times dramatically and with the NVENC encoder it'll be pretty snappy and smooth.

@ivanbrasla

3 жыл бұрын

@@cdbtheclaw Amd for gaming because pci 4.0 and rtx 3000. Intel for editing because of quicksync (?)

this case is awesome,really flexible,you can do anything you want,almost no limits ,plenty of hdds,ssds,FANS all over the place,i bet build in this thing can take hours till you figure out what the hell you can do with it!!! just great,nice vid Jay ,thanks

I have a Enthoo Lux 2, and love it

Jay: "What would you do with this case?" Me: *DEEP BREATH* Custom water cooling loop. Water cooled 10900k. Water cooled dual 2080ti's. Water cooled RAM. Back 140mm radiator, bottom 360mm radiator, front and side 480mm radiators. And at the top, three 120mm fans desperately trying to vent all that air. Then, I crank every dial I can find for overclocking. I want to see heat waves ripping from the top of this case like it's Alabama blacktop in mid August. I want there to be scorch marks on the ceiling above this case. And then, I go out and buy a Sugar Glider. And I teach it to surf the thermals until the joy of endless flight fills his little possum heart to overflowing.

@GreenLantern814

3 жыл бұрын

OMG I Love it!!

Jay! I would love to see a dual-system Gaming PC and NAS build. Ideally, my dream system would have independent PSU so I could keep the NAS always-on. Make it happen!

@TsaWind

3 жыл бұрын

I am trying to do the same thing for travel. Just can't stomach my gaming rig being ITX instead of ATX.

Great content as always and thanks for all the tech info. A small suggestion regarding the USB issue you facing not having space. When I used to have a similar issue I bought some small 10cm USB extensions and it worked out great.

Just bought this case for my new media system.

West : Phanteks Enthoo Indonesian : hmmmmmmm

@eksa3539

3 жыл бұрын

Hmmmmmmm

@irsyadhanin4508

3 жыл бұрын

Hmmm

hi just subed a few days ago i like ure content and im thinking of building my own PC

God, this is the case I was looking for. I didn't think I would need to go back so far in Jay's videos to find it. Well, actually I just watched the Server edition video that was just uploaded and went back and checked the regular version... 3 years prior.

Love my Enthoo Luxe

Im a simple man, i see new enthoo case i click like

I love how the manual he was literally reading tells you it only can fit 2x 480mm and 2x 360mm, not 3x 480mm...

@forgottenfox3857

3 жыл бұрын

@@theElemDragon which the case can't mount due to clearance issues. It only supports 3x 140 fans, not a 420mm rad due to the Motherboard position.

Great mini itx case bro

Hey Jay I had a similar issue with plugging in usbs, an easy fix was to go on eBay and buy a usb extension and plug it I to the back of the case. I glued the other end just under the desk so now I have an easy usb port under my desk👍

Once you go Phanteks, you can’t go back to anything else.

@Khilab_Lacks

3 жыл бұрын

Denis Ruskin I always had corsair cases, but yesterday I ordered this case to replace my obsidian 750d I think I’m gonna like it more than my corsair

@deviljes666

3 жыл бұрын

my 2012 NZXT still beat that crap in every way . Phanteks = garbages overpriced + features no one will never wants to utilize

@mirraco24

3 жыл бұрын

@@deviljes666 A case from 2012. Poor fella

@denisruskin348

3 жыл бұрын

no allowance money for a new case? poor boah

@deviljes666

3 жыл бұрын

@@denisruskin348 lol yeah yeah im broken but at least my 8 pc are keeping my balls hot in winter

Funny, “Enthoo” means “Whatever” in my language.

@hunterchap

3 жыл бұрын

I think its supposed to be short for enthusiast for their brand but I'm not totally sure

@d4django

3 жыл бұрын

Happy to see another mallu here

@rajeshn765

3 жыл бұрын

Jubair Siddeeque u too brother

@Juansonos

3 жыл бұрын

Given the modularity of the case, marketing would say it's intentional. The case can be whatever you need/want.

I have a phanteks Enthoo case, when It arrived I thought the driver had given me the wrong one. When I ordered it, it didn't seem as big in the picture. It dwarfed the case, I was swapping my internals to. But I love the case, cable management was a breeze. As it's so big air flow is really good, I really like it.

still rockin my enthoo primo

Laughing with my Lian li Lancool 2 mesh Edit: no longer laughing after discovering its a dual system case

Last time I checked there’s can’t be 10 people who are first😂😂

That plastic shroud idea sounds kickass, I'll have to remember that.

thanks jay i was just looking through duel setup cases just for more space and water cooling compatibility and this is definitely one ill be keeping an eye on when i do go to order, as of this one my other im keeping in mind is the MetallicGear NEO Qube

cool video! nice system!

the song they used with phils rig is called overstand by homebody

I'm with you on loving big cases. The htpc I want to build will go in something like that

I still have the original Enthoo, love the case! (though did have to do a small mod for front airflow)

This case is such a tempting upgrade from the original Enthoo that I have, partially because I find the dual system niche somewhat cool. My dream config would be to use the main ATX area as my primary rig, and set up the ITX system as a catch-all machine, as a file/game server, or as a secondary machine for when guests are over (whether they use it directly or we use it for VR). Hopefully, I would also do a custom loop, but that simply depends on how much I might switch out hardware.

My dream case is the Thermaltake tower 900. It's a big one for sure. And I will be sure to fill that thing with a dual loop.

Still rocking my old ENTHOO PRIMO case. :)

Jay, I like big cases too. Ive been using a Thermaltake Mozart TX as my main for almost 15 years. It fits anything and everything.

Gotta love Phanteks cases, great to work on. I use the P600S myself and one of my sons has the P500A. They also have lots of options and extra hardware available. The only problem is pricing, they’re not cheap ☹️ but still... great cases 👍

A beautiful case to put my main break in and a server in with all my nas stuff

DAM, that case is HUGE!!😮

4 Rads Fully fleshed out. Im Getting a 719 soon and im going to start by trying to passively water cool it. With the 5 fans my current system has on standby for emergencies.

I love my Phanteks Eclipse P300 case!

Two of my favorite case mfgs are Enthoo and NZXT, still using my Phantom circa 2006 black with red trim (custom). Yeah I bought two cases to mix and match the trim lol. The white case (where the original red trim came from) was pre-sold before it even arrived! Lately though all my customer builds have been Enthoo cases.

I have a cyberpower pc, prebuilt, it has a Phanteks case, so I was going to say the magnetic top. I upgraded it to a Ryzen 5 2600X and added another 8GB of ram (2 slots on the MB, A320M PRO-2 V2). I was pleasantly surprised when I took your advice to manage the cables, I discovered, unlike most prebuilts which are famous for lousy power supplies, mine has a EVGA 600 watt 80 gold.

When I see words on the screen, I here Phil’s voice in my head

I love phanteks! Nice cases to build into. Agree the little top flippy door is a bit of a pain but that's about the only thing. Very nice quality for the price!

I bought the 719 couple months back. I was originally waiting for the Enthoo Pro II to come out but I didn't wanna wait. Pretty happy I didn't. I had the original Enthoo Pro and loved it. I didn't buy it for water cooling, as I hate water cooling. In my 719 I have 2 Noctua 140mm IndustrialPPC 3000 rpm in the front and 1 in the back. Then I have 3 Noctua of the same fan but in 120mm at the top. Keeps everything nice and cool. Then I have the Noctua NH-D15 for my CPU cooler.

I've been looking for a case for my next build which will be my first watercooled build and I'm definitely going with this one. I was originally looking at the Corsair 7000 but this one being cheaper and similar to my current build, an air cooled Fractal Torrent, has won me over.

I will use this case for a dual system, it's great for streaming.