Dude sick! I've been looking for a long Gunpla video, I just recently got into them and they look so cool

After I saw the vid the first time, I went and bought the kit and led unit. The video is great and helping with the hard steps of the build. This is way better than the instruction manual, thank you.

@khorneflake5943

Жыл бұрын

Thx for the kind words, I'm glad I could help.

awesome clip, that helps me through some hard steps, thanks man !!!

@khorneflake5943

Жыл бұрын

Always glad to help.

Wow this video is done super well, this must’ve taken a WHILE to edit.

@khorneflake5943

3 жыл бұрын

Yeah, it took me a whole year from finishing the kit till the final upload. I grew tired at some point and didn't touch the editing for months, and the whole pandemic added to the mix. When it was hitting our hospital the worst I had to work 12-15hrs daily, 6 days a week, we only had Sunday free... Kit assembly took almost 3 months because of it.

I like unboxing vids and this is the best one

So cool ☺️

I could not imagine putting myself through this. I've built the MG Unicorn, Banshee, and they are just such massive hand grenades.

@khorneflake5943

6 ай бұрын

The bigger it is the more grenade it is...

I am sad that the Banshee doesn't come with the rotary guns that the Unicorn comes with. They're much cooler than the claw (even if the claw is pretty cool).

So I wanted to know about something: At the head build, I did see that you applied the metallic foil stickers for both the Destroy Mode eyes and Unicorn Visor, do they illuminate as much when they're applied on the back to provide more as a filter to let the LED's bleed into the eyes more vibrantly? And by the way, excellent pacing, even if it's a bit dragged, but it's the point of showing how each part of the entire kit is built under a complex structure, pretty much none of any other channels had any distinct form like this, and it's great to see something that is both instructional and both informative with how all of it goes until the end

@khorneflake5943

2 жыл бұрын

Not sure, tbh. I didn't try without them, in any of the Unicorn molds, but I guess its mostly for bleeding, there are more foils in the arms and shoulders for the same purpose. Heck, even PG Unleashed has stickers for the eyes. And thx for the kind words.

😍😍😍

i very love this video (>w

Man, I wished you'd cleaned up those nasty nubs before assembly. Otherwise, great to see how it comes together. Thank you!

@khorneflake5943

2 жыл бұрын

I wish I had Gunprimer Riser earlier, but since not I had to improvise....

@labombaboy9433

Жыл бұрын

with how OCD I am when it come to nub marks, seeing you cut the pieces straight off the runner killed me !!! 😱😵💀

@khorneflake5943

Жыл бұрын

@@labombaboy9433 I didn't have the needed tools back then, and it was like my 4th project, or something. Now I'm using Gunprimer Riser. I tried to hide nubs with gundam markers.

Important (to me) question. Is it only Riddhe that comes with this kit or is there a Marida pilot figure as well? Fantastic video btw homie

@khorneflake5943

2 жыл бұрын

Riddhe. Marida is a part of the expansion set, which is a separate purchase. Timestamped at 01:52:42

@awesome7818

2 жыл бұрын

@@khorneflake5943 ah now I see her. Thank you a ton!

If this was in a gunpla battle I do instantly forfeit his thing looks gnarly

@khorneflake5943

2 жыл бұрын

I guess that's the point. I still remember the string that played when Banager woke up in Unicorn's cockpit and saw the Banshee, lol.

Noticed you used markers to cover up the snub marks. Great effort. How to I get the color codes for the diff colored markers? Mr Hobby markers ?

@khorneflake5943

Жыл бұрын

I'm sure you can google the charts, but usually whatever pack you are buying its noted what colors its having. In this case I was leading myself by the eyes only. I used Gunmetal from the basic set, for the weapons and fingers, seemed like a great match, especially for the weapons. The armor itself is navi blue, but I didn't have that color at the time so I used grey from the Gundam Seed set, the dots weren't too big and it was important for me that the light nubs don't stick out too much. Nowadays I'm simply using Gunprimer Riser to remove the nubs.

The way you built this hurts me. Fantastic ASMR tho

I'm new to gunpla, can you tell me if the LEDs are included or did you buy them from a seperate kit?

@khorneflake5943

2 жыл бұрын

They are a separate purchase, around 100 dollars or more.

@anthai6452

2 жыл бұрын

@@khorneflake5943 thanks

The transformation is cool but that is painful to watch. If you have shaky fingers, you can break a piece.

@khorneflake5943

Жыл бұрын

It was my first time doing it, some bits are tough to pull, plus insecurity over stripping off waterslides... I never touched it again, its still in the destroy mode.

0:00​ Unboxing 02:12​ Inspecting contents 05:15​ Manual 07:47​ Beam Rifle Assembly 15:52​ Armed Armor DE (Shield) 22:57​ Action Base/Stand 24:17​ LED Unit expansion 27:35​ Torso/Cockpit 40:40​ Torso LEDs 44:53​ Foot 49:57​ Leg 58:10​ Leg LEDs 01:04:57​ Waist Unit 01:07:00​ Skirting Armor 01:10:10​ Attaching legs 01:10:33​ Skirt LEDs 01:13:38​ Fist 01:15:19​ Arm 01:18:33​ Shoulder 01:24:22​ Arm/Shoulder LEDs 01:31:48​ Attaching arms 01:33:20​ Head 01:43:11​ Attaching head 01:44:05​ Backpack 01:48:48​ Armed Armor XC (backpack add-on) 01:51:43​ Attaching Backpack and LED unit 01:52:42​ Unboxing conversion set 01:54:47​ Armed Armor BS (Beam Smart Gun) 01:56:32​ Attaching AA BS 01:58:36​ Armed Armor VN (Claw) 02:02:35​ Attaching the claw Waterslides 02:03:05​ Shield 02:06:47​ Beam Rifle 02:08:25​ Topcoating and final assembly of the accessories 02:10:30​ Backpack 02:12:24​ Body 02:19:21​ Topcoating 02:21:45​ Inspecting completed model 02:24:51​ Handling test 02:25:21​ Destroy Mode transformation 02:31:58​ Inspecting Destroy Mode Banshee 02:34:19​ Painting pilot minis 02:41:41​ Topcoating pilots 02:42:35​ Final showcase (thanks for watching) Gallery: imgur.com/a/VYOo3KA

@evawright2906

2 жыл бұрын

Action base standard

@evawright2906

2 жыл бұрын

Led unit expansion

@evawright2906

2 жыл бұрын

Acting heading

@evawright2906

2 жыл бұрын

the the

@evawright2906

2 жыл бұрын

Action base standard

Thank you for the Great Video! Sorry for all the questions. Could I please ask where did the female pilot come from? In the same kit? Liked and subbed

@khorneflake5943

Жыл бұрын

Its the expansion pack, you have it timestamped.

@RickSanchez-1943

Жыл бұрын

@@khorneflake5943 thank you, appreciate it.

For some reason that piece at part 37:08 would not install as smoothly for me as it did for you and was an absolute pain in the ass.

@khorneflake5943

Жыл бұрын

Yeah, you need to lineup several bits properly before pushing.

Which led kit did you use? I’ve seen a few that light up the backpack as well!

@khorneflake5943

6 ай бұрын

The official one. There's also a piece in the backpack...

@stephencastrosc1

2 ай бұрын

@@khorneflake5943one more question, you don’t think putting the stickers on the eyes stops the light from making the eyes glow red?

@khorneflake5943

2 ай бұрын

@@stephencastrosc1 its most likely to prevent having a huge glowing red gap. This way you have defined where the eyes are.

must have been a pain to make this video editing a almost 3 hour video is so hard also that's a strong camera you have my camera cant even capture a 10 minute video lmao. i have a few questions if you would like to answer them 1: do the LED wires get in the way of the transformation? 2: is this a daban kit? thats all anyways great video man keep it up

@khorneflake5943

Жыл бұрын

It was just a Samsung S10 phone that I had back then. Wires don't get in the way, you are just moving some panels for the transformation. And this is the official Bandai kit, not Daban.

@daskeishima9253

Жыл бұрын

@@khorneflake5943 thnx for your answer and i forgot one thing do you need to remove the heads horn in order to open it up?

@khorneflake5943

Жыл бұрын

@@daskeishima9253 not really, but it was a bitch to assemble...

Now you have no choice but to give us Unicorn Phenex 03

@khorneflake5943

2 жыл бұрын

Lol, already did two Unicorn molds, its all the same, the only difference is in their accessories. I was actually eyeing Phenex Narrative version, but it was 700 dollars plus delivery, and I already spewed quite a lot of money for Yamato SDF-1 and VF1-D kits. My next Gundam project is most likely GP-01.

@JesusNunez-vt7ph

2 жыл бұрын

@@khorneflake5943 Please :( but awsome looking forward to the video if you make one for it.

what top coat did u use?

@khorneflake5943

6 ай бұрын

Rust-Oleum Semi-Gloss spray. Its ok, but nowadays I'm using Chalk Varnish matt spray, and its now my preferred option.

31:30 there, when I assemble them is still strong attach to each other, but when I put all parts together especially for installing the LED, I found out that this part can’t attach to each other anymore, is this normal?

@khorneflake5943

9 ай бұрын

Which part exactly? You mean the one on the lower abdomen? Its supposed to be a bit loose, to reveal the psychoframe for the transformation.

where did you buy the led?

@khorneflake5943

2 жыл бұрын

From ebay, don't remember the store, but I can look. Bought two from two different places.

Are the waterslide decals permanent ?

@khorneflake5943

2 жыл бұрын

Well, they should be, if you topcoat them properly, that is... I didn't want to go overboard with the topcoat, so on some sections they tend to peel off if exposed to the direct sunlight. I have the mark setter so I just remedy them with that.

Where did you get the model from?

@khorneflake5943

10 күн бұрын

This was from amiami shop. You can also get it at Hobby Link Japan, I saw it not long ago reissued.

did you wash your gunpla before assembling?

@khorneflake5943

7 ай бұрын

No. This one wasn't painted, and even then rarely.

@sepdioenriquez702

7 ай бұрын

because you put decals and topcoat. i thought its necessary

@khorneflake5943

7 ай бұрын

@@sepdioenriquez702 you are going to be sealing it with the top coat anyway. Still can't make myself to turn the washing into the habit.

Where does the back bits go there not place for them the hell 1:32:29

@khorneflake5943

23 күн бұрын

What back bits exactly?

What In The Michael j fox is this. I must buy

you spend heavy money sir

Where can i buy it?

@khorneflake5943

2 жыл бұрын

I got it at amiami. You could also try Hobby Link Japan.

Can some one comment a link to this protect

@khorneflake5943

Жыл бұрын

What?

@tfr89564

Жыл бұрын

@@khorneflake5943 can you link to where you bought this

@khorneflake5943

Жыл бұрын

@@tfr89564 amiami store. You can see their postcard at the beginning of the unboxing. But atm the page of the product is unavailable, probably not in stock for a while.

How much did u cost for this Banshee PG?

@khorneflake5943

2 жыл бұрын

Banshee itself was around 220$ with the shipping, plus 62$ for the expansion set, plus 105$ for the LEDs.

@blyatsuke2759

2 жыл бұрын

Damn I can only buy $38 below

Are the gold parts under gated?

@khorneflake5943

Жыл бұрын

For the most part - yes. Gold bits from the chest and backpack mostly. Golden claws from the expansion pack are a different story, nubs on them are really exposed, but could be remedied a bit with the golden marker.

@youraveragehumanbeing806

Жыл бұрын

@@khorneflake5943 What about the face of the unicorn mode?

@khorneflake5943

Жыл бұрын

@@youraveragehumanbeing806 nubs are on the back, where you can't see them. You can actually see that on the part of the head assembly where it is.

@youraveragehumanbeing806

Жыл бұрын

@khorneflake5943 Thanks, I guess I won't have to worry about the gold nub marks anymore. V-fin doesn't also have visible ones, right?

@khorneflake5943

Жыл бұрын

@@youraveragehumanbeing806 some tiny, hardly visible. It seems to be the same color plastic, not painted gold over darker one like for the claws, or like on PG Phenex.

If this video under 50 minutes.. ngl you'll get tons if views Edit:*of

@khorneflake5943

2 жыл бұрын

Well, each click is still a view, no matter how long its watching. That's why you have timestamps, I'm sure most of the people are just looking for some specific thing they are stuck on, that's mostly the idea behind these. Hardly most of the people go through the whole thing, average view duration of this one is 20mins. Its not like I don't understand, I'm hardly going through longer vids myself, even the far shorter than this one.

nub marks 😬