I have a daihatsu sirion m100 1999 model and I could not find a single other video that showed the placement of the ignition coils and spark plugs ( I am a complete automotive noob) thanks to your video I feel confident that I will be able to make this repair myself. Thank you so much!

@spidiq8

Жыл бұрын

Glad it was useful.

Fantastic video. Thank you for showing. I'll have a go at changing myself.

How to replace grounding cable in perodua kenari from trrotle body...? Please up video...

Hi there , this video was amazing 🤗 watched twice and can now do it in no time 😊 thanks , just wondering what coil packs are on this engine ? Found a couple that fit the ej-de i3 1.0 but not sure if usable? 🤔

@spidiq8

4 жыл бұрын

Thanks and glad it helped. Sadly I can't advise on the coil packs as i've not had to change them, (touching wood)

@PU95TER

4 жыл бұрын

@@spidiq8 thanks for the reply 😊 I have discovered that the engine is actually a EJ-VE , and that it was also used in a daihatsu charade 1.0 2003 I believe 😊 hopefully this is useful to you and anyone else 😊

@spidiq8

4 жыл бұрын

@@PU95TER That's very useful to know, thank you for replying to let me know.

How to remove cam shaft perodua kelisa 1.0...??? Please video...

Nice

@spidiq8

Жыл бұрын

Thanks

Hello , I have the Kenari ezi 989 cc triple cylinder . I need to find the internal fuses location if you could help me please . I have found the ones under the bonnet . Many thanks in advance . Thanks for this video too I will change the plugs soon and wasn't 100 percent sure how to access them .

@spidiq8

7 жыл бұрын

Internal? I'm unaware of any others than the fuse box under the bonnet on the battery side of the engine bay?

@petrusgoel

7 жыл бұрын

Its just over the accelerator paddle...find the box there

@mohdazriaz7143

3 жыл бұрын

Masalah kereta kenari saya on kunci terus ada spark dkat plug.

Hi ,I have the same 1litre engine kenari. Lately the engine oil is leak from the rocker cover. can you show me how to change the necessary gaskets and seal. Thank you very much

@spidiq8

6 жыл бұрын

Chong June Kai Glad you found the video helpful, sadly I can't because being my own vehicle I can only film whatever I might happen to do on it at any one time and won't perform a job that's not needed as I have neither the spare time or resources to buy the items. The rocker gasket is typically quite a straightforward replacement however, unbolt the bolts, remove the old gasket and clean the gasket face if need be them replace the new one with a smear of grease or oil to help it sit properly then re fasten the bolts.

@chongjunekai9388

6 жыл бұрын

spidiq8 thank you for your help.

My friend. What size is the socket for the spark plug. Thank you

@spidiq8

5 жыл бұрын

It's a 5/8" spark plug socket you need. This is thinner than the standard toolkit type. Common on many motorbikes and the plug spanners can be gotten cheaply from auto suppliers.

@pacattack7121

5 жыл бұрын

@@spidiq8 thank you

@pacattack7121

5 жыл бұрын

@@spidiq8 sorry lol you mention it at the begining i just noticed

@spidiq8

5 жыл бұрын

@@pacattack7121 Ah, I thought I had but it is a while since I filmed this, no problem though.

is it safe to assume, 4 cylinder engines have 4 spark plugs?

@spidiq8

7 жыл бұрын

epique wenqa aka epik Yes it is. There's always at least one per cylinder. Some rare engines have 2 per cylinder.

@epiquewenqa

7 жыл бұрын

alright awesome, thanks for the response. one more question. when you install four spark plugs, do all of them burn together, therefore when one needs to be changed, all need to be changed?

@spidiq8

7 жыл бұрын

epique wenqa aka epik They don't ignite together as in, 'at the same time' but they all ignite an equal amount. Every time a piston rises on its compression stroke the plug fires burning your fuel and air mixture. When you need to change the plus you need to change them all at the same time. Your vehicle manual will tell you the change intervals but 6000 miles is not uncommon today, remove clean (wire brush) and regap at 3000 miles to help.

Why did u put greasa sir? Is it neccessary?

@spidiq8

3 жыл бұрын

Yes and no. Not using grease won't cause a problem with the car starting or running, but the copper grease is an anti seize measure to prevent galvanic corrision between the aluminium head and the steel spark plugs, as they now have a much longer life and can be in a car for 12,000 miles or more that risk increases so a little grease on the threads ensures they come out easily when you need to change them.

What was the plug number,? I have a Kenari 2005 thanks

@spidiq8

Жыл бұрын

I don't recall but it's a Diahatsu engine so a quick google will tell you.

Hi, What is the Brand and Model no for the Kenari Spark Plugs?

@spidiq8

5 жыл бұрын

I think the NGK part is BKR5E but not at home to check my sheet currently. An online part fiber should verify it.

@mytube-one

5 жыл бұрын

found it from the Internet. NGK brand- BKR5E-11. Thanks for the reply.

my kenari car , motor oil leeking , i dont know how to fix it.. already ask people who know how fix it but sad.. its not fixed.. dont know where is the problem of my car.. help me.. plz reply.

@spidiq8

7 жыл бұрын

Brandon Adrina Almost eveything is fixable, the question is, is it economically viable? first thing you need to establish is where the leak is coming from and how much it's leaking. Unfortunately with an engine caked in oil it's hard to tell so if possible get your engine bay steam cleaned first then get a torch and have a really good look roud and underneath while the engine is running, if it helps, get a friend to work the throttle to increase oil pressure while you look. Sorry I can't be more specific but it's simply impossible to say as there are so many places in an engine bay that a leak can come from and because it's under pressure it can even spray up from a low point then drip down ver the engine and bay.

spark plugs have oil.how to fix it kindly discuss that.

@spidiq8

8 жыл бұрын

If your spark plugs are getting oiled then oil is getting into your combustion chamber either via the piston rings or the valve stem seals in the cylinder head. First thing to do would be a compression test to try and figure out where.

@amanrasid3302

4 жыл бұрын

that gasket problem

Masalah on kunci ada api dkat spark plugs.

@spidiq8

3 жыл бұрын

Sorry I don't understand what you're asking.

Boleh minta petunjuk kh

@spidiq8

3 жыл бұрын

Sorry, I don't understand what you're asking?