Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

Thank you sir 👍

@TSGReelService

3 жыл бұрын

You're welcome. Thanks for watching.

Thank you your a life saver🙏

@TSGReelService

3 жыл бұрын

Thanks for watching. Glad to hear it helped.

@IhsanKhan-hw7ie

3 жыл бұрын

@@TSGReelService so can i fish the chesapeake bay after i removed the levelwind?

I had the same thing it could have been the worm gear for you but I greased and lubed everything up and figured out the two small screws that go by the line clicker (the left plate of the reel or the part without the crank) I took out they were pressing on something but now the reel feels like butter

@TSGReelService

3 ай бұрын

Thanks for watching and sharing, Deryk! Good info that someone may be able to use. Barry

Hi great job on the video thanks are theas reels hard to work on used to my old school reels thanks 🐟

@TSGReelService

Жыл бұрын

You're welcome and thanks for watching! Difficulty is all relative.... not in my opinion, but..... If you're trying to do a complete service, I would prefer you take it to your local repair shop or wait for me to do a full breakdown video.

Thanks for the video! Just bought this reel at a flea market and one of the channels on my worm gear are broken. Do you know where I can get a replacement?

@TSGReelService

Жыл бұрын

You're welcome and thanks for checking out the video! You can probably find it at mysticparts.

Does the clicker remain engage full time? The spring keep pulling into the teeth and the button will not stay in the disengage position. Any ideas why? Thank you.

@TSGReelService

3 жыл бұрын

Thanks for checking out the video. If it was functioning properly before, then the issue is probably not with the spring. The click button (not the click tongue) could be worn (or missing a washer in the stack) where the e-clip secures the stack. You can open the the non-handle side to verify if this is the case. If so, you need to replace the click button. Or, the spring could broken and need to be replaced. Hope that helps.

How much play should the worm gear cover have? Should it move back in forth some?

@TSGReelService

3 жыл бұрын

Thanks for watching! It might play a mm or two. If the reel functions properly, it's not an issue.

I just bought one of these off marketplace and it has no drag. Any idea what it could be ? Even if i tighten down all the way its like i have it on free spool....

@TSGReelService

3 ай бұрын

Thanks for checking out the video. Did you flick the lever into retrieve mode? If so, maybe you're missing parts.

@Relentlesscatfishing

3 ай бұрын

@@TSGReelService yes lol even in retrieve mode I can just pull the line freely

@TSGReelService

3 ай бұрын

@@Relentlesscatfishing hey, you'd be surprised what I see/hear when customers bring in their reels.... believe it or not, I had a guy who did just that..... claimed the reel wouldn't work, no matter what he did..... i flicked the eccentric and gave it back to him..... he looked at me like I performed some sort of magic. See the last part of my initial response again. If you're not comfortable working on the reel yourself, you can try taking it to your local repair shop. If you want my assistance, feel free to reach out to me directly at tsgreelservice@gmail.com and we can go over pricing.

@DeadFlowersForDinner

3 ай бұрын

Possibly, some wd40 or similar oil has wet the clutch plates from over oiling.

How did you get the star drag off?

@TSGReelService

10 ай бұрын

Thanks for checking out the video. It screws off, counter-clockwise.

Word of advice from a person that has done this several times,remove the levelwind and paw but leave the wormgear so there won't be any holes.

@TSGReelService

Жыл бұрын

Thanks for watching and sharing your thoughts. Yes, or seal it off. Spread the word about the channel.

I need this part... Warfare20lwlh.. From indonesia

@TSGReelService

3 жыл бұрын

Thanks for watching. Check eBay.

Body metal or graphite

@shorelinefishingmafia6133

3 жыл бұрын

Graphite not metal

@TSGReelService

3 жыл бұрын

Thanks for watching! Graphite.

Could you leave the guide off for easier and further casting?

@TSGReelService

Жыл бұрын

I think so...the guide and pawl.