OMGosh so glad I found this site. Hung 8 tiles peel & stick and they are trying to lift! I washed may walls with rubbing alcohol,,,, but seriously I NOW know gorilla glue adhesive construction will work. Thank you so much!!!!!!

Would have been wonderful if you would have shown how you applied the glue.

@SubarashiCookie

6 ай бұрын

I felt the same! I changed the the playback speed to be slower and could vaguely see how he did it lol

@WheelLoveTV

4 ай бұрын

This 🤔 my concern is it popping up from the glue or it killing the original sticky backing when applying 😵‍💫

@bobbyrutz9402

2 ай бұрын

You can see it at 5:41.

This is an excellent video! I think you have solved a lot of problems for many people.

Why not do the whole thing with the heat resistant? Then they all match.

@LRN2DIY

Жыл бұрын

I think that's a great idea. In our case there was only one pack of the heat resistant (in that style) at the store and it was 90% off but generally speaking yes - that would make a lot of sense.

@jujutobinson5038

Жыл бұрын

I worked at Home Depot and those heat resistant tiles are expensive

@Mattlawton-ft6ew

9 ай бұрын

​@@LRN2DIYuse pu they won't come off

@robira1313

4 ай бұрын

pu?

Wow, I am lucky and happy I watched this. I have already tiled my kitchen 2 years ago with that. Only temp till we get the rest of the house done. I have not had an issue with them, thankfully. We will be buying a camper soon and I will probably use these in there permanently. Now that I know this I will definitely use gorilla glue since those walls are a different texture. Great video.

@LRN2DIY

Жыл бұрын

Thanks and I'm glad to hear you haven't had any issues! It's really all about what you're applying them to, how clean it is and if you need to use adhesive. Best of luck with the camper job!

The brand you buy play a big role on the quality We have Smart Tiles brand, it's been almost 4 years and it's still holding fine, even those behind/around stove where it's "hotter" Also Smart Tile brand don't use epoxy base solution so the resin doesn't become yellow over time

@meganmoon6197

Ай бұрын

Oh good that’s the brand I just bought.

Could you use this application for a shower surround on top of and existing flat plastic surround?

So you can use peel and stick tile on texture walls as long as you have the gorilla glue or good adhesive?

Any tips for applying peel and stick over existing ceramic wall tile?

Do you feel like using the muscle bound sheets under the peel & stick tile would make a difference?

How long did you wait after applying the glue to the tile?

Would of love to see more about how you handled the outlet

What are those things called on the ends of the peel and stick tiles?

How was the adhesive applied?

Where is the link for the edging? Just thought I’d ask sure I can find it.

Thank you for the wonderful content!

@LRN2DIY

Жыл бұрын

Thanks for watching!

Looks great! So you put the Gorilla glue directly on top of the sticky surface of the tiles?

When the time comes to remove them for a different solution what is the best way to get all that Gorilla Glue residue off the wall?

Can I use the glue on stuco wall

How do you remove it?

sticky tiles on wallpaper? thats a no-go,no wonder they dont stick,i would have removed the wallpaper,sticking on wood is no problem,i would have roughened up the sufaces,like you said,when you stick these over existing tiles,then remove the shine with sandpaper and the sticky tiles will stick so much better

@Swit70

3 ай бұрын

What do you think is best to apply it over ceramic tile?

3m makes a pre glue that you paint on and it keeps adhesives from sticking. We use it in the auto industry with 3m double sided tape and velcros. I've had it peel off paint before the sticky pad came off. Called 3m tape primer.

@CharmaineSilva777

Жыл бұрын

I am confused. So you put paint on a glue so tape won't stick to it? Why do you try to put tape some where you don't want it to stick? How do you paint glue? Sorry, I am in the medical field and work in the operating room with a lot of tools, and I work with a lot of tools at home so I am always curious.

@LRN2DIY

Жыл бұрын

I just checked out the 3M stuff and it looks like it would work really well in these types of cases. I assume you meant that it keeps the adhesives from falling off, right? Not keeps it from sticking? Anyway, it's awesome that we have options and certain wall textures really need something like that in order to work.

@leavethemkidsalone860

Жыл бұрын

@@LRN2DIY I'm really not sure what they meant, but it did seem from what he said that they are using it in auto industry for masking so paint underneath doesn't get wrecked when you peel it off. The opposite problem it seems.

@dandeatrich6338

10 ай бұрын

@@LRN2DIY The guy above their comment is the one that said it keeps adhesive from sticking, meaning it won't let it stick. He's the one that confused the guy you're responding to, not the other way around. @CharmaineSilva777 has the right idea. I have no idea what the other person meant.

The peeling stick you are using is from Dollar tree? Because I've used peel and stick as a backsplash for two years now and it hasn't fallen off.

Super 77 spray adhesive has worked best for me but you gotta be quick.

@sincitygiggles13

23 күн бұрын

Thanks for the information 👍

Kind of surprised you don't use a Jerry Rig Everything razor knife. He does some DIY stuff as well different level of stuff but bet you 2 could collab something

did u use gorilla glue on the edging?

for the adhesive, do you think contact cement could work?

@LRN2DIY

Жыл бұрын

I think it could, yeah. It really all depends on what's underneath. Some areas will be really tricky no matter what while others are great candidates for peel and stick.

Did he just say the magic bullet? Lol not sure what a magic bullet is, but I know where my mind went. Lol

I wonder if the sticking issue might be on the tile side. It looks pretty shiny and slick on the front. If it's that way on the back that might be the problem. I wonder if it were more rough on the back would you have such issues. That gorilla glue is awful permanent.

oooof, that was a weird combo. the close ups of the 'tile' show so many alignment imperfections. would drive me nuts. lol

@jayjudd6518

Жыл бұрын

❤Could not agree with you more . 😊

@Optimization_Coach

Жыл бұрын

@@jayjudd6518 Yep...awful combo, but in the end, if they like it, then that is what matters most.

@LRN2DIY

Жыл бұрын

I have to agree with you there. I admit I didn't do a great job on it and should have slowed down and worked on the alignment better. Plus the combo, as I mentioned in the video, just doesn't look that great. I was definitely going for function over form here but hopefully the two tips about the glue and the heat resistant tiles will help some people.

Does the Gorilla Glue withstand the Texas heat?

They have peel and stick metal tiles too

I was hoping to see how you cut the space for the outlet :( Thanks for the Gorilla Glue tip though!

That combination of tiling is not very attractive. Looks like a bad jigsaw puzzle. I would have just use that stove top tile all around the area. I just since its an RV you don't really care but I wouldn't do it that way.

@LRN2DIY

Жыл бұрын

I didn't like the look of these two tiles together either. It's functional for the space, at least. If I were to do it again I'd either do what you suggested - use the heat resistant tile everywhere or find a better combo. I think the heat resistant tile that I chose is just kind of ugly but that's probably why it was 90% off at Home Depot ;)

@Swit70

3 ай бұрын

​@@LRN2DIYYou said that in the video

I love Gorilla products. I used their white construction adhesive to repair a knife block that, after 40 years, came apart near the base. It was easy to use and I let the block sit for 24 hours before moving it - I knew next to nothing when I did this and didn't even clamp it. Nearly five years later it's still holding strong.

Why is there a chair rail in that small space ? I would have just removed it first. Makes no sense. Also I would just buy some spray adhesive for added adhesion. And to the left of the stove I would not put tiles there just paint that paneling to match the other walls. And t having two types of tiles does not look tight, Just cover the whole area with the more durable ones. It is a small area

@leavethemkidsalone860

Жыл бұрын

He said because it keeps getting scuffed. Paint would keep getting scuffed and not solve the problem.

@fairamir1

Жыл бұрын

@@leavethemkidsalone860 Paint the wall.....roll on a clear polyurathayne sealer.

@LRN2DIY

Жыл бұрын

All viable options, yes. I believe the trim is there (in this case) to cover a seam in the panels so my options were to either leave it and only do a backsplash area, like I did, or remove it and tile the entire wall. I would have gone with a different looking tile / backsplash in that case but that's certainly an option.

Maybe 3M VHB tape?

Glad to know how to keep them adhered 🥰 but I'm sorry to say I'm not excited about how the two tiles look together. Sorta looks like you ran out of one style and filled in with the other. I think because you needed heat resistant your look would have been more cohesive using all of that tile. Just my opinion as an interior decorator.

I'd love to see an update at 5he end of the season.🤔

@LRN2DIY

Жыл бұрын

I can do that! I feel pretty confident that this will actually hold up really well.

should have used the stove tile all the way across

Just stick them and put a transparent glass backsplash on top.

I did not think those subway vinyls were all that inexpensive.

Good video but…you should have removed that black wood line and finished the whole backsplash in the SAME tile. Using two different tiles made it look really chopped up. The eye doesn’t know where to look because you have the black wood, subway tiles and the heat resistant with a conflicting design. If you like it though👍🏼 I would fix it

😂That looks like a mess. The bottom was so uneven. Not sure it was worth the time.😢

@ReyRestore

Жыл бұрын

Put a bead of caulk it’ll look great

The glue isn't renter-friendly

You look like Gary Owen lol

We appreciate you showing you failures on here but don't try to pass it off as a win!!!

Oh you should have stayed with one pattern. Thanks for the info though.. but maybe leave the design choices to your wife lol…

Yeah, they look pretty cool and convincing but they are trash. It’s not hard to find flashing or stainless to cut out and have just stainless, you can do plexiglass that can be wiped down easily Tile is difficult and without a tile counter a tile backsplash is it appropriate either? As crappy as it sounds, the linoleum is a good product in the right applications, but consider what the purposes are, backsplash is for where things can splash it could get hot things will get on it exposed to a variety of things with different PH temp all Realistically, the best backsplash would be some sort of metal that can easily be wiped down without a texture that can harbor bacteria But also certain types of wood could be nice as well. There’s a level of creativity, but it’s hard to tell what’s gonna go with what I mean I’m surprised our backsplash is aren’t all LED screens.

I’ll pass on not sticky tiles

So my wife bought aluminum stick and peel tiles for backsplash. We couldn't get them to stick and got discouraged. A few weeks later i found the can she used to paint the backsplash and seen it was satin made to spray and clean. We repainted with a primer, that i can't find the can, i want to say was called sticks or something. The first piece is still stuck pretty good after 2 days. The next problem is going to be outlets and light switches. Our house is a modular so the covers are just click on. Im going to have to either replace the covers or cut more out around them and caulk. Just found the can, it's call stix primer. I don't know long term, but is made to cover satin or gloss paint and leaves a chalky texture.

Why is everyone concerned with the look of it?? You said you didn't care for it. The purpose of the video is to show how to apply it, with the best adhesive and heat resistance. SMH

Looks cheap and plastic like. I’d stay away from that

Horrible 😂 toooooo Reflective . 😮

that's defiantly tacky.

These DIY tiles are not as simple as they make it look. And they can run in the hundreds of dollars for a small normal sized kitchen space. After I struggled with the application, my vote is 👎

Ngl sounds like amber didn’t know what she was doing 🤷🏻‍♂️

Looks terrible, don’t really match.

First comment