Hello my friends the big screw gets 80NM the torx screws every 25Nm. Greetings from Germany and thanks for the video!

@mediy5085

11 ай бұрын

Thank you for your kind help & advice. I reallly appreciate it !!!

谢谢你的视频！ 我也在拍一段关于这辆车的视频

@mediy5085

Жыл бұрын

非常感谢您的收看,先生! 在我看来,您的汽车保养渠道很不错.

안녕하세요 유튜브 시대에 좋은인연 서로손잡고 같이걸어가실래요 기다릴게요

Thank you, this video is very helpful. I have heard that replacing these engine mounts is a very big job, but looking at this video, I can do it myself.

@mediy5085

2 жыл бұрын

I'm just glad I could be of some little help. You made my day, Sir. 😄

@markhelfrich3733

2 жыл бұрын

I really appreciate the time you took to make the video and post it. I have a B200 Turbo 2008, I bought it 2 years ago at 100 000 km. I started feeling the engine mounts getting worse in the last few months, I will change them in the next week. Thanks for showing the socket sizes, I need to buy the T45 as I don't have one

@mediy5085

2 жыл бұрын

@mark helfrich oh I’m sorry. I didn’t see your comment till now. Did you fix it? I hope it work. Thanks for your sincere comment. thank you, Sir.😄

@markhelfrich3733

2 жыл бұрын

@@mediy5085 Yes, I did change the engine mounts, all went well. My car is the B200 Turbo. To get the socket onto the two front mounting bolts is more difficult on the turbo model. I had to unclip the turbo intercooler pipes at the bottom to move them out of the way. I then used the wrench working from inside the wheel arches to avoid disconnecting the intercooler pipes at the top to remove them entirely. Thanks for the video, it really helped me very much.

@mediy5085

2 жыл бұрын

​@@markhelfrich3733 I’ve been heard the turbo model is more difficult than normal because of the turbo pipe lines as you mentioned. but you did it. I’m really glad you did fix it. At the same time, I’m very grateful to you letting me know this result. Thank you Sir😄

Hello, my car is 2009 b170 automatic transmission. When my car is taking off, the cabin of the car shakes.Engine mounts have been changed and engine transmissions have been changed. But the problem persists.

@mediy5085

Жыл бұрын

Thanks for your comment. As you already know, there are many causes in car shaking problem. A damper pulley (known as a crankshaft pulley or harmonic balancer) mounted at the front end of the crankshaft. If the engine itself is OK and if there is red rust on the damper pulley, first of all, I recommend you check & replace this part.

과감하게~ㅎㅎ

@mediy5085

2 жыл бұрын

인생 뭐 있나요? 고고 ㅠㅠ