There are loads of videos about this , but yours is the best . The others all seem to have the engine out of the car on a bench , but you show how to do it in situ. Yours also is the best and clearest filming where you can actually see what you are talking about. Some of the others out there have been filming in the dark in a coal hole . To sum up absolutely excellent work . Keep it up 👍👍

Greetings from Canada. Thank you so much for making this video! I love the A and B class. Your efforts and experience is what will help keep these cars going for as long as possible. Thank you for sharing.

Amazing! Thank you very much for spending the effort to make a video like this

Mr Forrera Its Good to hear from you thanks very much for the Videos you post. they are educative and informative. I have gone from a car owner to to a mechanic ( I am also going through formal training )

This was fantastic thank you

What about the timing mark on the blueefficiency crank pulley ?

Thanks for the great video! I have a b200 turbo that rattles every 2 weeks or so. Should I actively looking to replace the timing chain? I replaced the tensioner but same issues after couple weeks and also, would a bad serpentine belt cause a rattling noise too ?

this is really good knowledge sharing, thanks, do you have any video to replace head gasket on B-Class W245

Thank you very interesting video, exactly the issue I have had on a B class - replaced the tensioner but the rattle is back and now sounds awful, I’ve been trying to find a garage to fix it but no luck! It’s also interesting to see that you did not drop the engine but gained access through the rocker cover, can I assume you split the chain join the new to the old and pull it through? Really enjoyed seeing another method!

Hello, thank you for the explanatory information. I own a 2009 A150. Timer chain noise is heard when the engine is started cold and goes away when it warms up. I think it's time to change the chain. My vehicle has 190,000 km. My question is; Is it possible to replace the plastic guides without completely removing the engine? Or would it be enough to just replace the chain and tensioner? Thanks in advance for your answer 🙏🏼

Do you have any advice for how to replace the hydraulic lifters on the engine? There is not much information online and i am finding myself zooming in on your videos to try and see if i can remove the lifters without taking out the camshaft. Any advice would be greatly appreciated

Great videos on your channel. My car had the noisy cold start up as your other video talked on, but now we the chain has broken. The starter spins and the lower pulleys spin, but the motor seems to remain still. If the chain broke, then there must be some parts down in the bottom under the crankshaft gear. I assume this mean pulling the entire motor out. Is it even worth trying to fix the chain is broken? Maybe just too much time and effort.

Спасибо за видео!

Wow, thanks @Forrera for making this video and your insight 👍 @2:47 camshaft timing mark for TDC @4:18 crankshaft timing mark for TDC @5:25 crankshaft timing mark for TDC - easier to see (engine on hoist) Couple of questions please: - when rotating the engine using the bolt on the crankshaft pulley, does the direction matter? - at what point do the timing chain guides require replacement? - you spoke about short runs and condensation causing issues with the timing chain. Anything else such as engine oil change interval? - from my understanding the petrol model suffers from timing chain issues compared to the diesel. Is this true and why?

@forrera168

9 ай бұрын

The reason you must turn the pulley clockwise is the bottom part of the chain must always be tight, and if you rotate it anticlockwise the chain might jump a tooth.

@forrera168

9 ай бұрын

The guides are included in most kits, but, fitting them means removing the engine. The crankshaft pulley bolt is probably the tightest bolt in the whole car and requires special tools to undo. Of course this will cost a lot more money.

@forrera168

9 ай бұрын

The car will remind you when the time comes for an oil change. Once a year is ok, even if you do very little miles, that's because of the condensation.

@forrera168

9 ай бұрын

I think most people don't other replacing timing chain in diesel engines because they cost a lot more. I'm one of them.

@NicholasRiviera-Dr

9 ай бұрын

@@forrera168 clockwise so it doesn’t jump a tooth - thanks 👍

Thanks you very much for this in deep overview. Does the chain clip come with the chain kit ? If not do you have a reference to share please ? To change the chain I believe you said we have to dislink a link , relink with the New chain and turn the motor to let it go into the chain path. When all the chain is in we unlink the old chain from the New and then we close the new timing chain with the clip. Is it the strategy ? If the old chain was very loose how Can check that there isn't additional damage to the head engine ? Thanks for your hardwork !!!

@forrera168

9 ай бұрын

The link comes with the chain sometimes but it's cheaper to buy a link separately and a close chain.

@forrera168

9 ай бұрын

Loose chain does not damage the head. Worst case scenario it will cut through the metal cover and start leaking oil. That's if it doesn't break first

Thank you very much for your video and information, i have b200 turbo and before 2 weeks ago i want check oil level in my car then i saw under oil cap the same milky oil and in the oil deepstick the same then i got panic and stressful, the coolent level is ok but i though the engine start mix oil and coolent , do you think i have the same breather or ihave pcv valve n my car engine?

@rajfell

25 күн бұрын

If you drive short distances, this is normal

Would a higher oil viscosity with shorter services and new tensioner help the problem? Thank you W169 2007 and W245 2006

@forrera168

9 ай бұрын

Not really

@amimenamimen8599

8 ай бұрын

​@@forrera168 what you think about swag-febi tensioner ? my virgin tensioner have 198 kkm I bought swag-febi because my tensioner is empty after night and after start engine there is 2-3 sek noise from chain , I wanted to buy original MB tensioner but there is no available anymore in Mercedes Service in all europe

Hi. Is it acceptable to just shorten the old chain by 1 segment? Thank you

@forrera168

3 ай бұрын

This is not possible because every link in the chain stretch and don't fit the sprocket properly anymore.

The noise in my car is only heard when the engine is idling and it started to sound recently. The engine has 250k km on it. I am thinking of changing only the chain tensioner as it seems that it can be done from the outside without having to remove the engine. My car is a 2007 w245 200 cdi. Do you think this can solve the problem?

@forrera168

4 ай бұрын

Diesel timing chain is totally different from petrol. It's harder to replace. So I would go for the tensioner first as you suggested.

@carlosrodriguez-escudero3778

4 ай бұрын

@@forrera168Thank you for your reply! Is it easy to replace the tensioner or it’s necessary to remove many parts to access to it? Another question is if it should be installed with the pusher pin retracted and then it will expand to working position when starting the engine? Thanks for you help!!!

Good afternoon Mr. Sevan. How did you put back the valve cover ? Because there is no gasket, so you need silicon, the mine is leaking on the belt side qnd going up to the coil wires, and I have to do the job on my car. It's said 24 hours of cure isn't it ? Thank you W245 B200 2006 near 200K

@forrera168

Күн бұрын

@@federicotorresbordils7624 yes, you need to use sealant, but you must clean it well. It always works well with no leaks if it's cleaned well and use quality sealant and it doesn't take long to dry

@federicotorresbordils7624

Күн бұрын

​@@forrera168Thank you very much. I am going to use Elring Dirko HT and clean properly the surface

Have you a video where you change the chain

@forrera168

6 күн бұрын

@@John-q6j9h Sorry, I don't have

can you show how to clean the breather? it looks like a sealed box.

@forrera168

7 ай бұрын

You don't need to dismantle it, you can use compressed air to the pipe on the side of the cover, and the 2 small pipes inside the cover.

can a bad timing chain also cause a foul smell in the car when accelerating hard?

@forrera168

9 ай бұрын

There are other symptoms of loose timing chain, rattle at start, rubbing sound on idle, fault code regarding correlation between crank and cam shafts, cutting out at low speed etc. As for the smell, engine oil level has more effect on that.

@arismidos4326

9 ай бұрын

@@forrera168 how much oil do you put on a W-245 B-170 from 2005? On the owners manual it says 5 liters Is that correct or do you put a little bit less?

@forrera168

9 ай бұрын

It takes a few drops short of 5 litres, this is because I've done it so many times.

@arismidos4326

9 ай бұрын

@@forrera168 and the foul smell comes from overfilling it?

@morningvictory7238

9 ай бұрын

Je dirais que ca provient de l'embrayage qui fatigue.

Whta is the cost to replace timing chain in your garage? A160 petrol

@forrera168

25 күн бұрын

New timing chain and hydraulic tensioner fitted cost £600 all in.

@rajfell

25 күн бұрын

@@forrera168 Thanks👍

Здравствуйте, сколько литров масла в 1. 5 бензин?

@rajfell

25 күн бұрын

5 L