Parkside PMB 1100 Metal Band Saw + Milwaukee Bi-Metal blades Unboxing and Test PART 3
Ғылым және технология
#Parkside
#BandSaw
#ForWorkAndFun
Info Facebook
/ forworkandfun
Support the Channel! PAY PAL DONATE
www.paypal.com/donate/?cmd=_s...
parkside.6f.sk/2019/10/24/paso...
Parkside PMB 1100 Metal Band Saw
stacionárne alebo ručné použitie
nastaviteľná rýchlosť pásu
zabudované LED pracovné svetlo
na rezanie kovových rúrok a profilov
prídavné držadlo nastaviteľné do viac polôh
plynulo výkyvný pílový oblúk s uhlovou stupnicou
jednoduché upevnenie k pracovnému stolu
1100 Watt
uhol šikmého rezu: 0 - 45°
otáčky: 0 - 290/min.
rýchlosť pílového pásu: 0 - 2,4 m/s
dĺžka sieťového kábla: cca 4 m
rozmery: cca 52 x 28 x 18 cm
pás: 1140×12.7×0.65
Milwaukee Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times, requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Includes three blades
Features:
12/14 TPI, bi-metal construction (3-Pack)
Matrix II high speed steel teeth with 8% cobalt
For cutting stock up to 5/32 in. thick
For use with portable band saws using 44-7/8 in. x 1/2 in. x 0.020 in. blades
Includes:
(3) 12/14T Band Saw Blades - 48-39-0661
Пікірлер: 30
When you cut angles like this you should put the part with the angle pointing upwards..the blade cuts more easier..
I must be doing something wrong. I did same way and my blade is keeps sliding off when it’s spinning. Yes it’s locked and tightened but no idea why it’s starts sliding off from between small wheels?? It’s original blade so the no size issue..
@2limbo
4 жыл бұрын
I have the same issues. I ordered these Milwaukee blades too. I can't recommend them because these blades slip (and yes tightened well) and when running the blade moves up and down. The original blade works fine, just cut an 11 mm thick plate (10 cm wide) and did this fine at 90,1 degrees which is nit bad for this budget machine. I asked Lidl shop where I could order original blades. So far no reply.
Do you provide website in English ?
I bought about 1140 × 12.7 × 0.56 Milwaukee Bi-Metal for that Parkside saw and danced the saw blade. Cut less straight I think the reason is because it is 0.56 thinner
@FORWORKANDFUN
4 жыл бұрын
Even with me is 0.56 and feel that the weld joint is inaccurate
Hi. Is it better than the original??? I just bought this machine... I would also need some replacement cutting blades... Where did you get it from???
@FORWORKANDFUN
4 жыл бұрын
hello try order here www.cpomilwaukee.com/milwaukee-48-39-0561-44-7-8-in--14-18tpi-band-saw-blade--3-pack-/miln48-39-0561,default,pd.html?group=miln48-39-0551
what's the price of this Metal Band Saw?
@FORWORKANDFUN
4 жыл бұрын
100 euro
@wykecastlewelding
3 жыл бұрын
89 pounds in lidle yesterday March 2021
Nový pilový list sa zadrháva, keďže nebol: ad 1. zabehnutý na mäkšom materiály ad.2 kvapka oleja pre hladší chod a menšie trenie.
@FORWORKANDFUN
4 жыл бұрын
Ano jemne olejovanie nie je na skodu. S tym, suhlsim
@imrichcsiba-csibasteel4890
4 жыл бұрын
Tam nebude problém či bol zabehnutý, tam sú poškodené zuby, to niekedy voľným okom ani nieje vidno. Na pílové pásy je najlepší Imtechnik Hlohovec.
Why change the blade ? Seems not really better ?
@FORWORKANDFUN
4 жыл бұрын
Only to prevent people from buying a machine. Here you can see the blades are standard
@carlalm6100
Жыл бұрын
@@FORWORKANDFUN So you do not recommend people buying this band saw?
Seams like for like blades can't be got, tried the Milwaukee and not the same, blade slips and drifting off angle.... Pity as it's a decent bit of kit for the money
Are wheels made of plastic?
@FORWORKANDFUN
4 жыл бұрын
Yes
@ivannekic1722
4 жыл бұрын
Well thats bad
@eniregnat
Жыл бұрын
@@ivannekic1722 They are metal (alu)
Personally I think the blade is travelling to fast, your blades won't last that way. I enjoyed the video though.
@FORWORKANDFUN
3 жыл бұрын
Here is the saw after 1 year of use. kzread.info/dash/bejne/a51qmtBydtuuh9o.html
Original blade is not sliping
as the saw blade can be leveled ravio and put in the cosp saw for angular sawing saw blade saw blade
@trevortrent319
2 жыл бұрын
i guess I'm pretty randomly asking but do anybody know of a good place to watch newly released tv shows online ?
@zayndominick3842
2 жыл бұрын
@Trevor Trent Flixportal
@trevortrent319
2 жыл бұрын
@Zayn Dominick Thanks, signed up and it seems like a nice service :D Appreciate it !!
@zayndominick3842
2 жыл бұрын
@Trevor Trent Glad I could help =)