i love how the mic just goes from earrape to mere echo and then people screaming "OH FUCK!" in under a second

@SoutheastWarrenEAS

29 күн бұрын

You mean they were saying “AWW FAAWWWK”

Generator to siren: "You're chopped liver!" Siren to generator: "You're blowing smoke!"

I love the initial realization at the end that this is never sounding again

@wigwagstudios2474

Ай бұрын

it's a shame too when you realize probably no one is going to go through the effort to build a new rotor because A. metal = expensive and B. BIG rotor size

@zachzebra56

Ай бұрын

​@@wigwagstudios2474unless they could find one from a parts P-50 but the only parts P-50 I know of is the former state fair park siren with the fried motor in ASC's yard. Even then, that would be super hard to do so cause you would essentially have to buy that siren from ASC. Assuming they are willing to sell it for parts.

@JointedStudios

Ай бұрын

@@wigwagstudios2474You cant just replace it for a new one. The entire thing is done for.

@wigwagstudios2474

Ай бұрын

That is mostly what I already said, but yeah... Minus one functioning P-50.

Amazing how the mic managed to survive a whopping 250+ decibels but the siren didn't. RIP.

@SirenDude1003

Ай бұрын

The camera was receiving roughly 160 dBs of sound, i’ll be editing the description in a minute or two with details on what caused the failure.

@zachzebra56

Ай бұрын

@@SirenDude1003 still amazing.

@SirensAndAlarmsOfNorthernIL

Ай бұрын

@@SirenDude1003Nah prb more than that, as that was how loud Frankie’s P-10 was up close. That was around prb 175-185dB

I have never seen a P-50 do that before. 😧

@wingochan9400

Ай бұрын

But damn, that siren can scream! Good thing you all were wearing hearing protection. 🎧

@polandball7482

Ай бұрын

@wingochan9400 Before the sirens rotator failed and later the siren sucked some fiberglass from the horn and blew up the chopper and stator got cracked and destroyed it will need a new stator and chopper and rotator

@ILoveViaLRC

Ай бұрын

Oh so that's why it sound low

@polandball7482

Ай бұрын

@@ILoveViaLRC no it’s sucked the fiber glass later In the video but it looks like it has done it before so I’m guessing

@fs_sd-10

12 күн бұрын

​@@polandball7482 It has a history of sucking in fibreglass that's why it was removed

Yo that P50 said I’m bouta blow 4:01

Pee-50 is crying:

Welp there goes my towns P-50

@MichanaAlerting

Ай бұрын

So sorry man

phill swift here now! that's ! a lot of damage!

i have to imagine thats pretty fckin scary to see a thing weighing probably over 1000 pounds suddenly jolt like that

@SirenDude1003

28 күн бұрын

It was quite scary.

Damn that bucket has a nice Cyclone 125!

Salute to the P50, you were a real one.

Those echoes when it stopped short is a good reminer of how loud P-50s actually are.

The thing really wasn't having it today was it...

I know this might be a stupid question, but is there a way to 3D print a new chopper?

@MrBallsAgain

Ай бұрын

No… this thing is done for 3D printing won’t do anything especially since it’s metal and big

@zachzebra56

Ай бұрын

Probably not. Because your gonna need a freaking big 3D printer to print something that size. For one. And two, the plastic or whatever the printing material is called would likely shatter and self destruct from running at that speed.

@bentheidioticnerd8993

Ай бұрын

@@zachzebra56 I think 3D printers can also produce things made of metal too.

@zachzebra56

Ай бұрын

@@bentheidioticnerd8993 Really? Never heard of that before.

@BrentMaphonsEpicMukbangShorts

9 күн бұрын

i dont think a 2 feet IN DIAMETER piece of plastic is gonna survive being spun around 60 TIMES PER SECOND in a slightly bigger piece of metal in a 1000+ pounds big-ass metal bucket

bro that thing got the worlds fastest chopper brake

@zachzebra56

Ай бұрын

Stopping a 80 pound at least chopper spinning at 3450 RPM in a blink of an eye? That's more impressive then Sawstop! I present to you all, Sirenstop! Patent pending.

@therailcat9790

20 күн бұрын

Pretty sure everyone knows now but the chopper cracked in half

@blurplemurple4960

20 күн бұрын

@@therailcat9790 i know

Sadly the rotator motor’s gone

h What happened to the p-50

Oh my god 😯

It broke at sirencon 2024

well, Panasonic survived but that siren of P-50 is dead and done. They are gone, mate.

That was so cool until it broke 😂

it sucks that i missed the p-50 but i had to leave

That's a rough way to go :( At least now I know what sound is left after a siren suddenly cuts out, and with one of the beefiest electric ones at that! So who wants a repair and restoration project now? Gonna need $$$ that's certain!

Quite the experience if i do say so myself

Me neither, i’ve also never seen a p50 sputter

What’s going to happen to this P-50?

@benjaminbrown3939

Ай бұрын

Prolly gonna be melted down and made into a T-128.

@Alwaysdoinit112

25 күн бұрын

@@benjaminbrown3939 It can't be fixed?

@Alwaysdoinit112

25 күн бұрын

@@benjaminbrown3939 T-135ACDC*

@benjaminbrown3939

20 күн бұрын

@@Alwaysdoinit112 unfortunately it's toast

RIP 🪦 4:01

What happened to the siren?

@benjaminbrown3939

Ай бұрын

Blew up

4:01 the siren's chopper broke

rip p-50

Sounds like my lawnmower 🤣

Did the chopper blow up?

@minnesotaoutdoorwarningsirens

Ай бұрын

no but it cracked

@codyrapp7253

Ай бұрын

@@minnesotaoutdoorwarningsirens wow. I guess you can say he no longer speaks.

@cannon4337

25 күн бұрын

ERRRRRCHA

rip p50

THAT WAS SO LOUD

@BrentMaphonsEpicMukbangShorts

9 күн бұрын

180+ db

Rip siern

Siren jangan kenceng-kenceng nanti rusak ya

LOL imagine actually owning an P-50

@dandidoo1393

Ай бұрын

🧢

@VonnaWasser

Ай бұрын

@@dandidoo1393 but then again if it was borrowed from ACA Sirencon would've have been sued by now with an article

@blockstacker5614

29 күн бұрын

@@VonnaWasser ACA went bankrupt in 1992 and subsequently reformed as American Signal Corporation.

@Godzilla20191

28 күн бұрын

This P50 was taken down and the people at siren con decided to use this P50

Rip to that microphone

@zachzebra56

Ай бұрын

135 Db's at a 100 feet. That's 100 feet! Now imagine you right next to the thing without hearing protection. I can imagine anything above 250 to 300 Db's! This thing could actually kill you if you were up close without hearing protection.

Loud bucket dead, Panasonic won.

4:01 p50 Explodes

How did this happen?!?!?! 💀💀💀

@chocosterling6225

Ай бұрын

Apparently, a piece of fiberglass got sucked into the intake and caused the Chopper to explode...

@AschTheWolf

Ай бұрын

This is your fault P-50, and the rotor was seen in videos (strangely not this one) to be smoking the whole time it was running before death

@acap5084

Ай бұрын

@@AschTheWolf Are you accusing me? 😠

@thespiritstingray9359

Ай бұрын

​@acap5084 for all that is good and holy don't start roleplaying It was an accident. Nobody did it intentionally.

@chocosterling6225

Ай бұрын

@thespiritstingray9359 this is the actual youtuber p50 though

Tester siren tornado 👍

This sounds absolute garbage

rip p-50

rip p-50