How much would these boards go for normally? And also, can’t we test the boards with a multimeter and see if it’s a fried resistor or capacitor? Wouldn’t that save someone money from having to buy a whole entire board? Im just curious.

thanks for the diagnosis help

Where do you get service manual for Panasonic tv sets.

Hi, can you send me the link with the full video of how to change the Y Board? Thanks!

grand merci pour les fideles du domaine

What is the board called or what exactly do I need to buy to replace this? Because I have the same issue on my tv. Do I need to replace with a whole new board or is it just a smaller piece?

I have 7 blinking lights on my TH-50PX75U plasma. Do you have the Y Board ordering info for this and where do I even buy this things? Thanks in advance.

What is the link you mentioned for the board on the left?I have the same TV and problem.

I have a Panasonic TC-P54S1. It was working fine, then when turning it on, it clicks, but will not come on, and I have a slow blinking red power light. It is not like the 7 or 6 blink service codes in your videos. Any suggestions? can I assume it is a power issue?

thank you!!..now..at least i know where to go from here!!

Can you help me get a link below mines a 58 inch plasma TV I bought it back in 2009 It was doing the blinking lights as you said in the video but I kept the power button down for over a minute and somehow the screen came back on so I’m happy right now but I know my TV is on his way to the death bed it’s time for me to buy a new TV I guess I wish I could fix his

Hi, I have the TC-P50S2. I disconnected the 2 wires and it changed from 7 to 6 blinks just like yours. But I have 3 boards instead of 1, its the Y sustain and two buffers. How do I know which one to replace? Is it still the Y sustain?

@antoniolesears533

4 жыл бұрын

Did you ever find out

@workhorse7134

2 ай бұрын

Lol, there's no useful replies in these comments. Guy just teased us all with the issue then disappeared 😂

What are the reasons that this happens to the tv.

hello i got the tcp50s30 and i have 7 red lght wats need to be change

I need your help brother I have a panasonic tv with the 7 red lights of death model no. TCL42U12 what does the manual say? I tried what you did for this tv model in this video after unplugging the small board on the left side didn't get no flashing lights nor 6 flashing lights.

What is the website where I get parts

My Y buffer doesn't connect with a cable like yours from my Y sus board. Had a couple of loud pops, 7 blinks, no picture. Cannot see any bulged resistors or anything.

My 65 inch panasonic plasma tv has a 6 flash code i want to buy the board i need please if you know where to get one

Anyone know where to buy the boards at?

Hi my 65 inch panasonic plasma TC P655T30 has 6 flash code where can i get the board i need to buy one

THIS WOULD HAVE BE BETTER VIDEO IF HE SAID THE NAME OF THE PARTS OR EACH BOARD

@bryanleiporsado6845

6 жыл бұрын

Richard Odwin description

I have a 42" Panasonic plasma, model TH-42PZ700U, for the 4th time over the years the TV shut off &the blinking red light came on. In the past Panasonic would fix this free of charge cause it was an issue with this TV, Currently I am getting 10 blinks before it stops & blinks 10 times again. Do you know what 10 blinks means?. Thank you

are these parts even avail now?

7 red blinking lights does not mean bad y-sustain or z-sustain board, but no vs or va voltage.

I can't find the video where your suppose to show us how to remove the back cover.

my 55" 2012 model TC-P55UT50 has 8 blinking lights. Any suggestions ????

@tyleryourking9614

3 жыл бұрын

Same

@isildurtube

3 жыл бұрын

VT30 same 8-Someone repair?

Are you still active? I just had the problem happen today.

I have a Panasonic 58"plasma. 2010 model TC-P581. Same 7 light symptoms as described in your vid, but the boards inside look different. Which boards should I order?

Hay i got that 7 blinking ligth problem but did wat u said i disconnected the 2 plugs but instead of geting the 6 blinking ligth i just got the one solid never blink cen u help me with that and main is a (tc-p32x5)

I have Panasonic Plasma 60" with Model # TH-58-X60U ( MF -July 2006) with 12 blinking. What should do to fix.????

Hello! can someone help me out? my Panasonic TC-P42X5 plasma won't turn on! have a steady red light when i turned on. no clicking sound or any soud at all. i pull the power supply out and clean all the contacts to se if it solves the problem but it didn't work.

@bisuchester6105

5 жыл бұрын

I can't understand....

I LOVE youtube!

bro my Panasonic HDTV plasma TV model TC-P50S2 has no sound n a pink screen

Same thing JUST happened to my 50in plasma model # TC-P50GT30 - pretty annoyed about it... 7 blinking lights. calling my retailer. Will see what he says.

@danielsanchezalmanzar2973

4 жыл бұрын

Hey Johny I have the same tv and is having the same issue... What did they tell you back then? Tks

@philipkilolo9775

4 жыл бұрын

I have the same TV, same issue, what was the solution?

Hi, great video ,,what about 13 blinks red light? thanks

@77mikia

3 жыл бұрын

Mine too!

@AngaarUriakhil

3 жыл бұрын

@@77mikia 13 red blinks indicates a problem with your main board.

@77mikia

3 жыл бұрын

@@AngaarUriakhil thank you

Panasonic plasma 42X30D horizontal dotted lines plz solve me

My Panasonic Viera 50" Plasma started doing a similar thing about a month ago. But If I unplugged the power for a few minutes then plugged back up..,everything was back to normal. And it would work like normal for several day to a week, then out of the blue it would happen again. That is until this morning. It did the red blinking light this morning and despite unplugging numerous times,etc...,nothing. When I plug it back up, it sounds like the tv clicks on..,but nothing but black screen and 10 consecutive blinking red lights. I count 10 blinks instead of 7. My tv is a little older (March 2008)..,but has never ever gave me any trouble at all. That is until about a month ago and this started happening. Now it wont do nothing but sit and damn blink !!! Please help..,as I cannot afford to go buy another tv !! :(

@CATSRULE1969

9 жыл бұрын

Ok..,after getting aggravated w/ the tv this morning. I just went to bed (I work 3rd shift). I got up about an hour ago and figured what the heck..,Id try the tv one more time. Plugged it up (heard 2 clicks)..,walked around and no blinking red lights. I hit power on remote and surprise..,it Works !! Its back on now........,for now :/

@andreamitchell4758

6 жыл бұрын

i have the same problem TH-50pz80u sometime sit works sometimes it does't seem to do it when it is hot in the room though

@GrizDon

5 жыл бұрын

I have the same issue with the Panasonic viera

@lenas5613

4 жыл бұрын

@@GrizDon how did you resolve it???

I have the 55 inch and it is usually a great TV until the other night when we had a helluva storm the electricity went off twice ! It came back on one then the second time nadda ! I did the unplug and hold the power button for 10-30 seconds .Then held the power and menu button ...nothing ! Once before it happened and we had to wait 3 days then it came back on . There was no blinking of the red light at all. Just nothing . Will I still have to replace fuses or the power board ? I love y TV! I am so bummed ! 650 bucks does not come out of the sky ! I can not afford to buy a new one .I am about to throw a brick at it ! LOL!

@pagalley1

7 жыл бұрын

I have same problem, with my Panasonic plasma Viera 55 inch tv...Sometimes, it takes 3 days to come back on...Tried the plug out method, too...Used to work faster, when I first got tv, back in 2012, but, for the past 2 or 3 years, it takes 2 or 3 days to return to normal.

Changes the bad board, worked for a bit then went back to 7 blinking lights...

Mine did this but it fixed itself after I turned it off for a few seconds. I’m kinda worried now though that it’ll repeat (and eh I guess I was gonna buy a new one soon anyway). Cheers

@alanjolin3845

Жыл бұрын

I have that going on w/ my 2006 it took around 60 attempts of cutting of the power this morning to turn it on. You probably got the right idea, but it gets a great picture

I have panasonic plasma vieera 3D my TV suddenly blank n black but power on the red light still have and power supply still have but TV cannot trun on? Sir can u help me

i have Panasonic tv mod # th-42pz700u how to fix broken 7 blinker...I NEED VIDEO.

Lucky my Panasonic blinked the Tuesday before Black Friday. .... However , I did call a repair shop (2010) purchased.... he stated, that the Panasonic was outdated and the parts weren’t available .... 425$ ordered the 4K 55” Samsung.... ⭐️⭐️⭐️⭐️.... I was against Black Friday until now🌞

@DanielAmyx

5 жыл бұрын

Your repair shop was not honest about parts being available. They are online, and the repair is fairly simple, just time consuming.

@daronjordan4548

5 жыл бұрын

Thank you, I was about to put it on the curb.... first I’ll count the blinks

@daronjordan4548

5 жыл бұрын

10 blinking lights

How many blinking lights, was it nine?

@n8dogue

4 жыл бұрын

His was seven.

Mine changed to 8 flashing lights when I unplugged the board. What does that mean?

I' m getting 4 blinking lights. Please help.

my doesnt blink what to do?

Problem fixed unplug than put in another outlet

Ever since a Power surge two days ago that damaged a phone box downstairs that had to be switched out then find out the TV won't turn on two days later

I have a Panasonic , it has a problem sometimes the tv turn off and the red light go off too . I cant turn on tv until the tv turn on by his self

My Panasonic viera won’t turn on from standby mode - I just get a solid red light - any ideas?

@sdznmustyy5216

4 жыл бұрын

have you fixed if?

Hi: I have a Panasonic TC-P55UT50 and I have three blinks on the red light. It stops for a couple of seconds and starts again. I had the same problem recently but it started again until now, when nothing happens.

@tyronenelson9124

4 жыл бұрын

3 blinks means no 3.3v dc, a psu issue

@rickymcconnell3925

4 жыл бұрын

I have the same problem three rings what did you do

@rickymcconnell3925

4 жыл бұрын

@@tyronenelson9124 how did you fix it

I have a different model, but I have the same blinking pattern. Changing from 7 blinks to 6 blinks does not prove the board your pointing at has an issue. It happens when you disconnect the ribbon cable, disrupting the communication with the mother board.

i got 3 blink its 3,3v sos u can help me on panasonic TC-P50G10

@rickymcconnell3925

4 жыл бұрын

Mine has 3 blinks what did you do

Mine powers on then off or sometimes doesnt power on at all only blinks, i have found that if i run the hairdryer over the circuit board on the right hand side of the back of the tv for about two minutes through the grates it will work again until there is high humidity in the air. then i have to do the whole thing over. its a quick fix and lasts several months.

@somegirl6662

5 жыл бұрын

Thank you! This fixed my tv

@alanjolin3845

Жыл бұрын

I'll try that thanks

I blinking light on 2006 EUR7721X10. Help please

Mine is doing it steady

I have a TH-50PZ80U and last night it hit me with the 7 blinks of death. Any advice?

@frankdaniels4364

8 жыл бұрын

For more help you can go to avsforum in the plasma section and there's a master thread. www.avsforum.com/forum/167-plasma-flat-panel-displays/1001318-master-thread-panasonic-plasma-not-turning.html If you need a shop manual go to elektrotanya, I'm sure there are other places.

My tv now won't turn on at all--the display when turned on makes the usual 1 click noise when you first turn it on and then displays a black screen and stays there--with the red LED on the front bottom screen displaying power staying at a constant rate with no blinking. Whereas after this happens the remote doesn't work or respond to the tv, and also the buttons on the tv do not work at all--all buttons including the menu--yet the power on the tv is on... TCP46st30 Panasonic

@TheMiercat

8 жыл бұрын

did you figure it out? mine did the same thing

@gobinnandlall4912

8 жыл бұрын

The people told me.. i have to change the number 1 baord, circuitboard

@TheMiercat

8 жыл бұрын

+Ganesh teamcops thanks for the reply

@georgebourque9660

7 жыл бұрын

Same thing just happened to mine TC-p42s30 .. did you replace the board ?

Mine went from 7 to permanent green when i disconnected ?? Th 50px70ba ??

@name5183

3 жыл бұрын

🤷🏾‍♂️

@christopherlithgo2600

3 жыл бұрын

@@name5183 fuck knows

tc-l32c3 tv plasma does not power up, 11 red blinks

@thiagocaristo3490

8 жыл бұрын

did you figure it out, 11 blinks here too.

I tried all the steps above but instead of 6 blinking lights after disconnecting the parts & plugging it back in now I get 8 blinking red lights. What does that mean?

@Spaz2147

9 жыл бұрын

Your "su" and "sc" boards are bad. The 7 lights is for the su board. When you remove the board and try to test you will get 8 lights. Replace both and it will be like new.

@JAnderson

7 жыл бұрын

First of all, great video. Very informative. My TV is doing the same thing. I have a TC-P60GT30 and it started with 7 blinks. I removed the cables and then it blinked 8 times. Which board is the SU board and where can I find one? I found the SC board on amazon.

3 blink for me

I removed two wires then got 8 blinking. Ugh. Any help ?

@patrykczujko2586

4 жыл бұрын

So do you know already? Same here

I have 10 blinks And is a model TC-P50c2

This led to 10 blinking lights on my TC-P50X1, anyone know the solution?

@paulinemartinez5504

3 жыл бұрын

Same here

@23GMENDOZA

2 жыл бұрын

And still got no answe

I had the same problem but what i did i press power button for 10 seconds light turn off and press again and work u may want to try this option first before taking all apart

@tracybramlett534

3 жыл бұрын

This worked for me! Easier option!

@artbyporschia

3 жыл бұрын

The hell? Yeah this worked, but thanks for walking me through how to count to six and seven, fun times.

my tv the red light never stop blinking, not sure what part is?

@chrishill9903

6 жыл бұрын

black Whale Hi

@blackwhale9541

6 жыл бұрын

Chris Hill hi?

What if I have 10 blinking red lights

I get 12 blinking lights not sure what to do

@michaeljones794

4 жыл бұрын

my tv is 65 inch Panasonic

how many blinking lights...? was it 7? I think you should say it just one more time..!!

@phximplant

7 жыл бұрын

and count them out loud so we know it is 7 and not 8.

@koorencia

6 жыл бұрын

DCupintheHIZZY *for the people in the back!*

@essentialfix

5 жыл бұрын

nah not 7... it think its 5+2 or 4+3 blinking lights

Why not just repair the y-sustain board, instead of buying a whole new one?

@TipsNNTricks

6 жыл бұрын

You sure could, I'm not the best solder'er but if you have electronics knowledge for sure:)

@Mocredible

6 жыл бұрын

Oh ok. Gotcha.

@ tipsnntricks

Because this problem mostly comes from power supply

so how naked are you!? lol

Mine just died a week ago and they no longer make the part I need to fix the TV, very unfortunate because the TV is about 2 years old. I am very disappointed with the set and will not be buying a Panasonic TV any time soon.

@ytlaser8222

9 жыл бұрын

ACDCnLedZeppelin If you still own it, go to Ebay and look for used tv parts.

sorry but I don't get this video. we switch from 7 lights to 6 without a solution to the problem?

@MrHighdr0420

6 жыл бұрын

stupidy, u take tv apart and unplug that long board on the left. Then power the tv on and if you get 6 lights the long board is the problem and you need to replace it. DURRRR

@TwitchDmfor4x

6 жыл бұрын

Murphy Law Bro said "durrrrrr"

No blinks.. No anything.. Help

My is not blinking

Mins blinks 8

Hey guys this video is like torture guys, drag it's out epically guys. Guys no need guys. And I can count to 6

What a bout 5

@tammanagupta6140

5 жыл бұрын

Yes if it blinks 5 times then what is the issue

When I done this I actually got 8 afterwards now what ?

@koutrae

4 жыл бұрын

Me too

@The2thguy

3 жыл бұрын

Yes, I have the same situation, after I did that I got 8 blinks instead of 6. What does it mean?

is better get new tv

I Have a Pansonic tc-P65VT50 and its blinking 3 times ... wont turn on either.. can you tell me which part I need? ANY HELP PLEASE

@stevenguyen8262

4 жыл бұрын

I have the 7 blinking lights issue as described here. Worked perfectly until it was transported due to a move.

@Jermaine-NC

4 жыл бұрын

I'm having the same problem with the same tv. Did you ever get it fixed? If so how?

My tv blinks 12 times not 7

%

huh?

my TV blinks like 14 times wtf is wrong with this shit hole anyone know, it’s a Panasonic Model No: TH-42AS640A

oh wait..6 blinking lights.. how many? 6 blinking lights...... one...two...three...four....five.....six.... .. just in case we couldn't count aye!?

Red light blinking every 5 seconds

I dont think he said six enough times he could of got a couple more sixs in lol

Ok, so we know what board it is, Why don't you do a video that shows what the fault is and fix Rather than just saying get another Board, That would be more helpful considering lots of people cant just get new boards. thank you

Too much shit talking.

@hiltonsmith7990

6 жыл бұрын

tc -p42c2 7 blink red light

I can't be bothered to take the tv apart and do this shit any more simpler ways?

@bryanleiporsado6845

6 жыл бұрын

Shelby W technician, and make this video a guide so you know what's really the problem and not be fooled by some tech guys.

@joeeckley5272

5 жыл бұрын

You betcha, go to Wally World with credit card in hand.

Dude you went on for over 2 minutes about 7 blinks. We know that is why we are here.

I have Panasonic Plasma 60" with Model # TH-58-X60U ( MF -July 2006) with 12 blinking lights. What should I do to fix problem.????

bro my Panasonic HDTV plasma TV model TC-P50S2 has no sound n a pink screen