Another winner, and no Gonads were harmed or hurt in this build!!! 😂😂😂

Never to many clamps! 👍🏻👍🏻🇺🇸

Great job! Would love to see you make a gaming table for Dungeons and Dragons game play. Love the videos.

I'm so glad I found your channel 👋

I chuckled when it fell apart 😁 great video and an idea ❤️

Bloody beautiful as always mate great job.

@dainermade

6 ай бұрын

Thank you kindly

Thats some strong shelf there, Mark. Especially with Dirk and all sitting on it on the thumbnail 😜😁

Anything that keeps your knackers/gonads in tact is a big plus in my book. Shelf looks awesome 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

dude you are the king of this business. Yes you are a pallet king. I appreciate your good and true ideas. (I love your miter saw. Because I'm there :-) )

2 жыл бұрын

@@dainermade That Rooster is yours now. :-) The rooster has come a long way. And the cock is very tired :-) Cheers mate. All the best. Kind regards

Mate I good a good laugh, oh and good job! Hope the Gonads weren't harmed in the making of this video. Keepemcomingdude.

Gdday Mark! I'm pissed drunk watching yer video! Check square!

So glad to finally see someone use a french cleat for a floating shelf. Not used enough, IMO.

Love that Turgworks t-shirt. AND of course all the pallet stuff....

@JesperMakes

2 жыл бұрын

@@dainermade I'll stay tuned ...

I’m new to the channel and beardless you is not what I was expecting 🖖

I don't think I've ever seen that trick to cut angles and have the offcut drop off, cheers! I hate making those cuts, will remember that one for next time. 👍👍

@woodfather

2 жыл бұрын

@@dainermadegood job izzy swan 😉

@woodfather

2 жыл бұрын

@@dainermade 😄 "Look at this jerk, he uses MDF as a drop shelf on an angled cut - doesn't he know that in paraguay you can't buy 3mm mdf ? how am i supposed to use that technique as well, think of you folowers instead of big MDF corporations!"

Just want to say that I didn't jump on and jump off...always like what you do!

You Got my subscription because of one piece toys :), and got my views in a lot of your videos because of excelent ideas with pallets.

This is a great idea 👌 Thank you for sharing!

That 3 mm tip is awesomeness

Clamp master!!

This is the kind of videos i like ! Dont care too much for wood turning . Nice job!

just made me 1st table thanks to people like yourself .. cheers for all you do m8ty....it was after fiinding your channel that give me the final push (i didn;t know i needed) to get going.... i owe you a 🍺 or 🍻 i feel 👍

Recent subscriber and love what you do. You have a very natural and funny way of working, great to watch. I now find myself looking at pallets in a whole different light, my wife is going to hate me!

Just found you, Loving your channel;good bastards indeed!!!!!

Great video again I haven't seen that tip of keeping the gonads safe I will be using that in the future thanks Mark my gonads thank you as well 😀Steve Tas.

Mate. That 3mm mdf trick is top marks. I had a proper brown trousers moment first time I had kickback on a mitre, and it missed my plums by barely 10mm! I reckon you'd get a lot of traction if you snip that particular tip into a short mate, it has all the right attributes!

@samsboringchannel

2 жыл бұрын

@@dainermade haha, fair enough, I need to have a proper Crack at insta, and yt saying that haha.

A tidy little shelf good job Mark

3mm MDF trick is a game changer! Love the authenticity of the videos Mark. They feel natural and un-scripted. Recently suscribed, and looking forward to seeing more videos from a fellow Aussie!

The Material of Choice in Pallet Town Pokémon

Great job Mark. Check square. Darlington, South Carolina USA

That’s an awesome looking shelf!!!

As usual, love your work. I only wish I could different colour pallet wood as well. Mostly just pine.

Looks good!

Cool video mate

Nice job Mark. There seems to be no end of things that can made from pallets. All those snub nosed know it alls can go take a running jump. Anyway what was I saying, oh yeah, good job and keep up the good work! BT out.

Recently subscribed and watch many of your wonderful videos. Your are very talented, inspiring and give the relaxed presentation that makes me think I should give pallets a try too! Thanks for all your tips and work putting all this together.

I would have liked to seen how the hook attaches to the wall and a better look at how the wall piece latches to the Shelf

@TowTruckMark

Жыл бұрын

@@dainermade THANK you for the response and your time... GOD BLESS YOU MY FRIEND... LOVE YOUR VIDEOS 📹❤

You keep giving me ideas before Iv finished the other one lol. Still love your work I’m just trying a carbon fibre table and scaffolding board then chase out for some resin like a river table but in carbon

Hola! 🖐That is a fine looking shelf. Believe it or not I was lost until it all came together. Too bad you had a "spill" there before you clamped the moisture out of that wood 😂😂Then it became clear, it's a really nice project. Take care and have a good one, Adios! 👊

Those other fellas ARE all good ba$tards 👍 You're not half had either Mark. Keep up the good work.

If you havnt done so already, do you reckon you could do a clip on pallet selection out in the wild. What is the ducks nuts, what do you pick up under the heading of "meh this is ok" and what do you drive past.

Hey mate, just found your videos and I love them! You’re inspiring me to start woodworking! p.s. love the one piece figurines!

That’s one great looking shelf

Nice one mate, those pallets came up great, you have certainly have a lot better pallet wood up there in Townsville then the shit I have over here in WA 😂

Joli !

Love it :)

Right, Im off to find some pallets! Few things to knock up for the house and the results youre getting are great! Did some time up in Townsville, yeah stinking AJ, was definitely love/hate relationship with that place!

@BBGuitars

Жыл бұрын

@@dainermade were you in at some stage? The beard says not any more haha

@BBGuitars

Жыл бұрын

@@dainermade was a Combat Engineer up at 3 from 2010 to end 2015, then moved down to 6ESR in Sydney for 2016 and then they moved the unit to Amberley RAAF base in 2017. Ruined myback and ruptured a disc in my neck on JLC in 2015 so was all downhill med D from there. The new woodwork shop they built up at Amberley though, WOW. They spent some serious coin in there, wish I had access to that now. Back in Vic these days, started making guitars but looking for other avenues to sell some odds and ends to cover the cost of my tools...

I guess I deserve that 😂😂😂 Hope you're well dude, hope you had a lovely weekend! Keep killing it! ✌

Great piece mate!

Awesome video mate! Love what you do with pallet wood!!!

Always such an inspiration for me. Thank you for all your tutorials ✌️🙏

@prakashsamputh1031

Жыл бұрын

@@dainermade yes yes I’ve seen them all 😃👌👌👌

Hey mate. Nice job on the shelf. Have you noticed a lot of your comments have vanished from threads lately. Someone will comment and then you post a reply they comment on your reply but but you can only see their comments. 🤷‍♂️

@dainermade

7 ай бұрын

Hey Jack, I’ve not noticed anything sorry. I generally do not go back to the original comments unless there is further conversation

This was a glue only build. It's rare to see that. Plus there was no palm router to shamfer the edges. Shunning tape for elastic bands was also mold breaking. There are makers yelling at their televisions demanding at least a complex leaky epoxy pour to right your wrongs. You are so easy with the strict rigours of the woodworker genre and a breath of fresh air. Could you imagine If you and Jesper were in the same room together, I suspect the combined awesomeness would melt the planet.

@loopinnerthe

Жыл бұрын

@@dainermade this video I reckon was within a spider's nadger of being the best video on KZread but that honour has to go to your Z leg desk... but then there is Jespers stool made from snail infested junk wood. The one where he melts the bees wax on a fire... gosh... so much joy you guys bring to the world...

New subscriber 🇦🇺 About to check out your other videos.

@funkyflips5388

2 жыл бұрын

@@dainermade 😂😂

You can add a bit of table salt when you are glueing up, it does help stopping things from sliding around. Tho I've not personally tried it with 45° cuts 🙂 great video. Thanks for your hard work 😁

Glad to know I am a good bastard. Question, I could go back and watch it again, but I am busy not dying so I will just ask the question. Could the waterfall not have been done in one length?

so you dont worry to much about the wood being crooked when glueing? i just glued 5 pieces of pallet wood to make a table leg but ive only got 3 clamps and the gaps in the table leg is enough where Im not sure i want to use it. I might order your clamps from ebay ive been spending $37 on irwin clamps from bunnings.

Kickback into the gonads 😮

Hey, can you get your son to check his school emails? he has unfinished assignments he needs to complete.

WOW nice video kabayan hello FROM Philippines WALK TOUR channel 👣🚶🏃🏃📽️📸m

LOL still have the old 2 buck spatula.......

how many claps do you own? by my count some where near 50 do you really need that many ? im just start in on same path and all i have is around 6 and longest is only 500mm

would it be safe to build a cutting board from pallet wood

@dainermade

4 ай бұрын

I don’t because I can’t be 100% sure on a direct contact food surface

Mate, that's the biggest squeeze bottle of sauce I've ever seen. You must get through a heap of pies 🥧. Oh yeah, and grouse shelf.

I burn all the left over “bad” woods

First Again! :P hahahahahaha

@woodbywhitey2212

2 жыл бұрын

That's what she said.....

@FixitFingers

2 жыл бұрын

Well that shirt just keeps going and going... we'll have to get you a pink one next :P Good to see the old pallety goodness back! I was so excited to click on the thumbnail I didn't notice this is the one you wanted the pose on and had to go back and check after watching 🤣

So are you or your kid the One Piece fan?

@chrisbolt5350

9 ай бұрын

@@dainermade you should check in out. As a long time anime fan it is some great storytelling, but the character design and early seasons animation are a bit hard to get past.

Lots of CLAMPs in this one, I like it 😁😁 🗜️

@TheGrantAlexander

2 жыл бұрын

@@dainermade you got lots of time 😁😁