You are a true craftsman and artist. I drive my g/f crazy with showing here how you create all the little details and such. Kudos to you good sir. You are truly gifted and thank you so much for sharing your gift!

I truly, truly enjoy watching your work and you are one fantastic model builder. I've learned a lot just watching your videos and I thank you kindly!

Excellent work David, and thanks for the tips, and showing the methods you use. Your vids are always a pleasure.

This is "just" pure ART, compliment!

Another amazing video David. You have the best modelling channel on You Tube - it's inspiring, entertaining and a real education. Thank you.

I love how your weathering effects flow over the decals so naturally. I have a problem with other modellers where the model is heavily weathered yet the decal portions look brand new. Looking forward to your next video. Nice work!

Always a pleasure to watch your videos David.👏🏻👏🏻👍🏻

Thank you for sharing what a fantastic model.

I am proud of you David.

is one amazing video again David ...i will love see all the build from start step by step...i like how you work with resin parts and paint them...very nice job again ....!!keep modeling mate !!!

you have an amazing skill, watching your videos has got me back in to doing model kits. thank you and keep up the good work.

@ameerhamid89

7 жыл бұрын

Agreed! I've never wanted to get back into scale models this bad.

Very nice work indeed and superb skills on display. Well done David, I am really enjoying these videos and learning so much from them too. Many thanks for sharing and I hope that you have lots of fun with your next project once the Messerschmitt Bf-109G-6 is complete, Joe

Brilliant lovely work as always. Inspiring.

I know that my day will be sooooo much better when a Plasmo video shows up on YT. Thanks for allowing me to "relive" the days of my youth when I built models too. Great job as all ways my friend, and looking forwards to the next episode. :-)

@idaemonplasmo

7 жыл бұрын

It is always a pleasure for my read comments like this one. :-D Thank you.

great vid enjoyed very much thanks for your time to share appreciate your work top stuff as always cheers 🍻🍺😊

Absolutely brilliant. Thanks for sharing!

great model so far , can't wait to see the finished fighter

You are an artist. Assembly model, paint airbrush, any details... everything beautiful. end video is the best. very good work.

@idaemonplasmo

7 жыл бұрын

I appreciate that very much. It's nice to know that is not so bad.

Wow that plane looks great especially the propeller cone!

Excellent work!

great work as always

Simply incredible!

Wonderful job David!

W latach 1990-tych mój kolega używał nitek wyprutych z matczynych pończoch do robienia linek sterowniczych na grzbiecie Me109. ;-) My companion used to make the rudder cables on the top of his Me109, he used the threads stretched out of his mother's stockings in the 1990's. ;-) Zdravi polak s Norska! :-D

When I first started watching I thought that your colour choice was way off and I was going to give you a thumbs down. After seeing the end result I was blown away by your sheer brilliance and I have given you a huge thumbs up. Great work, you are a true professional Sir!

Nice work David! Will you please make a short tutorial on clear coating, types of clear coat, pressures and distances?

Thank you again David

Jako vždy perfektní. ..

Another great video, Thanks.

Beautiful work! love the channel

@idaemonplasmo

7 жыл бұрын

thanks

Very beautiful work, makes me want to start building luftwaffe planes.

thanks for your videos they help me alot

Awesome ! 👍😊

Great video! Are there any tips that you can give for painting the canopy of your aircraft? I find it to be one of the most difficult parts of painting my models because my hands shake a bit, and I can never mask it quite right.

I love your videos

Fantastic. Thanks for sharing.

wow very wow cnt wait to see the rest

You really a master! Thanks for the videos. Wich nee dle do you use in the Infinity here? 0,15 or 0,20 ?

Pěkné video like

Love your channel and narration. Might I suggest using a spray bottle to wet/flush the surface while sanding? It cuts better and your sanding pad will stay sharp longer.

Hello, I've been watching your channel for some time, great work! Could you tell me how many layers of gx100 do you paint and how much time it dries between layers?

how would you recommend masking the designs on a gee bee z

How do you get the paint to not leak under the tape? I tried various types of tape but they usually leak under. Is it to do with the consistency of my paint or my pressure that I am spraying at?

I absolutely adore this channel, thanks for existing PLASMO :D would You make a model of a F-86 Sabre? I'm having trouble with it tbh...

@andrew2366

7 жыл бұрын

Me too so much time spent watching!!!!

@nikist824

7 жыл бұрын

I'm currently making it's foe - the mig 15bis, not an easy model, given the fact that it has an aluminum finish, but I'm getting there and I'm pretty satisfied with how it's turning out

@Towarzysz_Orlinski

2 жыл бұрын

You make models too?

@smigoltime

2 жыл бұрын

@@Towarzysz_Orlinski ye

@xarex7900

2 жыл бұрын

Ha ha, I found you smigol

what were you brush painting on the wing twords the end??

perfektní,díky

wow, I maybe will try shading on my next model, it look cool!

Bravo !!!

skvělá práce a musím zvlášť pochválit tradičně výtečný hudební doprovod

Which clear varnish did you use ?? please do let me know.

How do you have instal the big baltenkreuz, and open the trape ?

Very good work!! One question! ....... What kind of sponge do you use to pass and leave the paint very thin?

Hey David, how did you achieve the nice contrast between the RLM 74 and 75? I've used the same paints and can only see a distinct difference in the colors under exceptionally good lighting. Any tips/suggestions?

@idaemonplasmo

7 жыл бұрын

I used good light. Yes, you have right, these colors are similar.

Hello! What kind of compressor do you use?

What type of airbrush set up do you use?

What chipping varnish are you using, and is it safe to apply masks on the painted surface or will the paint peel off with the masks?

Hi ... did you apply a primer coat before laying down colour coats ?

Genius :-)

Díky za super videa. Sám stavím civilní auta, ale od tebe se rád podívám na cokoli, baví mě tvůj styl.

@idaemonplasmo

7 жыл бұрын

Dík. Já mám raději závodní auta. Teď jsem koupil ferrari fxxk a ferrari 330 p4. To taky není moc civilní, ale je jsou to nádherná auta.

@redneckpraha

7 жыл бұрын

Super, tak ať se daří!

@idaemonplasmo

7 жыл бұрын

dík. Dám si záležet.

Can you say about your airbrush mark, model and its pressure please?

Great video, I was actually looking at these Luftwaffe AK sets today so good timing. What PSI do you spray them at after thinning?

@idaemonplasmo

7 жыл бұрын

Thanks. I use 14 psi. 1 bar

Sir hi again, you did not putty the seam of the wing root ? WHY

Great!!! Next model La-5FN plese =)

Lovely video as always David! Keep up the stunning work :D Have u ever tried MRP-paint? I haven't but I heard the are amazing withnice stain/gloss surface... so you don't have to sand your model after painting ;) PS; I'm still going to watch the video's on your channel and not on that of A.K.Interactive ;)

great work, David!!! Please tell me what is your model airbrush? And sorry for my bad english. Thank you for videos.

@idaemonplasmo

7 жыл бұрын

Thanks. H&S infinity 0,15 mm nozzle.

@user-le1lf9zv6q

7 жыл бұрын

thanks!!! :))

Lavochkin models are nice too, it's a great plane, maybe you can find some historic camos and build a model, late modifications like la 11 are nice too

@idaemonplasmo

7 жыл бұрын

I like la-5 FN

Hey David, what tape do you find best for covering up areas you don't want sprayed? Whenever I try to use tape, it usually rips up the paint underneath and, as I'm sure you know, this is extremely annoying.

@idaemonplasmo

7 жыл бұрын

I use Tamiya masking tapes for many years without problems. And for some wide masking electrical tape because Tamiya is not cheap.

@benbovard9579

7 жыл бұрын

Ok thanks for the tip!

Excellent model. What grade sandpaper do you use after the varnish? Thank you

Did you use any surfacer/primer for those AK colors?

@idaemonplasmo

5 жыл бұрын

No, and I had a problem with it. I do not use these colors anymore because they are not resilient.

More videos. Wohoo!

Great work! Have you ever considered making them without the landing gear deployed?

@idaemonplasmo

7 жыл бұрын

It goes? :-D

@janlankamp5779

7 жыл бұрын

PLASMO - plastic models when does part 3 of the p-51 mustang come

@idaemonplasmo

7 жыл бұрын

This project is canceled.

@luismateos4379

7 жыл бұрын

Ohhhh, great work anyway.

@Filipcorobivblenderi

7 жыл бұрын

a to uz preco je P-51 zrusena? :(

Hey man, I have a question: How do you keep your model collection clean? Once in a while dust has to be cleaned, do you use any products in particular that aren't aggresive to paints and finishes? Thanks in advance, keep up the excellent work!

@idaemonplasmo

7 жыл бұрын

I have a display case with glass doors, so I do not have a problem with dust. Anyway You can use some ordinary duster

Hello David, I have some difficulties with my modells. Iam using an air brush to and last time when i used it there was a problem and there was a rust on the surfice of the moddle like bubbles. It was really ugly and tha paint came off like it was just like powder. Do you have any ideas what could cousd this, maybe there was a problem with the paint or maybe the preasure was to high. I would be pleased if you could help me out.

Have you tried using MIG ammo paints? Is it much different than AK ?

@idaemonplasmo

7 жыл бұрын

Yes, it is different, No just kidding. Vallejo, AK, citadel, MIG are almost same. You can combine each color together. Choos what is available in your country.

@StaticModel

7 жыл бұрын

I doubt You can compare citadel and MIG, cause MIG ammo is horrible for regular paintbruh...

@idaemonplasmo

7 жыл бұрын

I wrote almost. :-D

@StaticModel

7 жыл бұрын

Its like day and night :D

Hi PLASMO, I love your videos. I'm building 1/25 Dodge Challenger now. It's my first serious project and first time I'm using airbrush and acrylic paints. I had previous (teen years, and I'm almos 40 now) experience with 1/72 and 1/48 airplane and helicopter models but I always used normal brushes and humbrol oil enamels... with poor results. One problem I have is paint on the car's body has moire/orange peel effect. I used Tamiya fine surface primer first, sanded it with 1800 grit sandpaper, then I applied few thin coats of Tamiya Acrylic (X) paint thinned with pure IPA. I sanded last coat with 2200 and then 3000 sandpaper unfortunately it ate through the paint on the sharp edges of the car body and the orange peel is still there... what's the problem? Was the paint too thick? Too thin? Or the layers were too thick? How long should I wait before applying next layer of paint? I have some experience with painting a real cars (with pretty good results) but this seems like a whole different story...

Hi..!! Im looking for the videos part 1 and 2, where are they..? Thanks..! Im starting this kit, but with the decals for the Franz Stiegler 109G-6, to honour him.

Magic

David, do you have a paint booth and / or wear a respirator? If so, can you share your setup?

@idaemonplasmo

7 жыл бұрын

I use spraying box and respirator. health first

@user-zt5vf1mf5q

7 жыл бұрын

It's just a great job, you have a very cool voice, super!

Can you do the FW190 D9 with the JV44 scheme

What size needle do you use?

where do you buy your stuff, online or in a local shop??

@idaemonplasmo

7 жыл бұрын

I do not buy them. AK send me all stuff as sponsors gift. Only Ak. I buy rest in a local shop.

Great job David!! What would you say about AK paint? Can you tell us some pros and cons, and how they are in comparison to hobby color? What would you choose?

@idaemonplasmo

7 жыл бұрын

Ak, Vallejo, Citadel are acrylic, and Tamiya or Mr colors are lacquer. This says Mig so that must be true. I still think that lacquer is much better for airbrush painting. I feel confident with Tamiya or Mr colors. Maybe it is just habit. You can achieve perfect result with both types. Anyway, acrylic colors are perfect for a paint brush. lacquer not.

Been looking forward to watching this since I was notified earlier today. Guessing your videos are now sponsored in some way with AK? Great video.

@idaemonplasmo

7 жыл бұрын

Thanks. Only this one. Two previous videos were for free. I just showed what I could do and Ak like this videos so they offer me sponsoring but only for videos for them. I mean for AK youtube channel.

@sutt16v

7 жыл бұрын

That's great for you David - I'm suprised other companies involved with this hobby haven't asked you to do work for them. Looking forward to the next video :)

Is it eduard kit?

Nice work! Which clear cote you are using here?

@idaemonplasmo

7 жыл бұрын

Super clear III. I use only Mr color varnishes.

@michajurczak3237

7 жыл бұрын

Thanks.

War Thunder got me into scale models.I bought my first one.Its a Cosair from Revell.I appreciate any tips you have for a beginner.

@JensenTaylor2804

7 жыл бұрын

The same reason I returned :)

@lukebremner1959

7 жыл бұрын

Same here

1:45 , 2:26 How many Bars die you use for this steps? :)

How do you thin the super clear iii? Also, how do you have so much of it? Great video as ever!

@idaemonplasmo

7 жыл бұрын

I use Mr color leveling thinner. I prefer more thinner to varnish.

@oliverdobson5199

7 жыл бұрын

Thanks! Keep up the good work 😀

What brand of aibrush do you use?

@idaemonplasmo

7 жыл бұрын

harder und steenbeck - infinity

omg so nice can i recomend you the guillow's se5a its made of wood and look like a real one :D

супер

how many layers of aluminium color did you apply for scratches?

@idaemonplasmo

7 жыл бұрын

One or two.

@ijsbrandvr

7 жыл бұрын

Thanks!

Nice 👍

@idaemonplasmo

7 жыл бұрын

Thanks. kzread.info/dash/bejne/dWuCtbd_dKusl8o.html Sabaton. hell yeah

@Sabaton62

7 жыл бұрын

PLASMO - plastic models ok ;) My Fans Groupe Sabaton.

nice;)

Молодец

What is atmosphere in your compressor?

@rurushu8094

7 жыл бұрын

Некто Кто то He uses the Earth's atmosphere. 78% nitrogen, 21% oxygen, 0.9% argon, 0.1% trace gases and a varying amount of water vapour

@jamesjacocks6221

7 жыл бұрын

Ha! But you gave the standard atmosphere makeup. In his shop, who knows? I like that the traditional abbreviation was atm (ATM-stuff that supports life as we know it). I think that something was lost between the cultures.

Hi What airbrush do you use please Thankyou Amazing videos Plasmo Cheers

@idaemonplasmo

6 жыл бұрын

Thanks, I use H&S infinity with a 0,15mm nozzle. Working with AK colors with such a small nozzle was difficult.

@philburrows6036

6 жыл бұрын

PLASMO - plastic models Thankyou for your reply Cheers

AK RLM 83 is a blue color??? Why this interpretation???

Parádní práce :) také začínám pracovat s AKčky :) ale trochu stále bojuju jak s ředěním tak s tím, že mi občas vznikne z nátěru tzv. "pomerančová kůra" ... jak tomu předejít a jak ideálně ředit tyto Air Color :) ... díky :) Jinak je radost koukat na tvé videa :) hodně inspirující :)

@idaemonplasmo

7 жыл бұрын

No právě s tím jsem měl taky problém. Chce to trochu retarderu (zpomalovače schnutí). KAždopádně tento typ barev je spíše na štětec. Barva je hodně gumová a osobně preferuji Tamiya nebo mr color.

konečně první !😅 vyplatilo se nejít do školy 😅😅