Painting cabinets

My process, painting cabinets, sanding, one coat of primer two coats of alkyd enamel

Пікірлер: 32

  • @LilyBecca
    @LilyBecca2 ай бұрын

    I'm impressed with how well you are able to tape ofd the hinges. It looks fantastic! It makes so much sense compared to taking off all the doors!

  • @royharper6095
    @royharper6095 Жыл бұрын

    Looks amazing and the fact that you didn't have to take the cabinets down is the kind of style I want to learn

  • @twsd
    @twsd4 жыл бұрын

    Nice work buddy. It takes a long time to figure out what works. You have invested your time wisely.

  • @tonyrome068
    @tonyrome0684 жыл бұрын

    Great job. Looks like your guys are great at taping. The prep is the most important aspect. I used to tape and spray cars before I painted houses! Thats great detail work.

  • @truestarsolutions

    @truestarsolutions

    4 жыл бұрын

    Thank you sir. It's all in the prep work

  • @singlefather01

    @singlefather01

    Жыл бұрын

    Are u serious?

  • @dboysofly8946
    @dboysofly89464 жыл бұрын

    What grit was the sand paper?

  • @yonnyrubio1499
    @yonnyrubio14994 жыл бұрын

    Question, what tip did you use for the Graco ?

  • @ash27791

    @ash27791

    4 жыл бұрын

    Yonny Rubio I was wondering the same.

  • @yonnyrubio1499

    @yonnyrubio1499

    4 жыл бұрын

    @@ash27791 Really good work from this guy. 👍

  • @truestarsolutions

    @truestarsolutions

    4 жыл бұрын

    FFLP 410

  • @michelangelopaintingwallpa2887
    @michelangelopaintingwallpa28874 жыл бұрын

    Nice job. What kind of paint and primer are you using?

  • @logan214

    @logan214

    4 жыл бұрын

    Top coat product? Sw emerald?

  • @truestarsolutions

    @truestarsolutions

    4 жыл бұрын

    Yes

  • @pd8specialops880
    @pd8specialops8804 жыл бұрын

    What type of paint and primer did you use? Try using the fflp tip for the top coat as wells

  • @truestarsolutions

    @truestarsolutions

    4 жыл бұрын

    KILZ Adhesion High-Bonding Interior Latex Primer/Sealer. First coat of primer is with graco 595. 2nd coat and 3rd coat of paint applied with HVLP capspray

  • @pd8specialops880

    @pd8specialops880

    4 жыл бұрын

    @@truestarsolutions so what was the top coat? Emerald urethane?

  • @truestarsolutions

    @truestarsolutions

    4 жыл бұрын

    I do use emerald for a lot of my cabinet jobs 👍🏼👍🏼

  • @miasingleton6540
    @miasingleton65403 жыл бұрын

    No messing about , 1 kitchen a day !

  • @eloygameno379
    @eloygameno379 Жыл бұрын

    Just take off the doors bro lol and why did you take all the dishes out?

  • @gerardcaballero1912
    @gerardcaballero19123 жыл бұрын

    Nice, but too many trigger losing, I personally do one pull trigger per square cabinet all around starting from one corner and finishing at the same corner, if you master it it will give you a very good coat in corners and no spits from letting and pressing the trigger so many times, trust me if you put a light on the side of one cabinet you will see some little spit balls of paint in only shows when you see from a side and against ceiling light. I mean it takes non different time to fix is just spraying a little differently.

  • @truestarsolutions

    @truestarsolutions

    3 жыл бұрын

    👍

  • @petethehandyman9185
    @petethehandyman91854 жыл бұрын

    You paint the hinges?

  • @pd8specialops880

    @pd8specialops880

    4 жыл бұрын

    He taped them up. I hang all my doors but looks like taping them worked

  • @petethehandyman9185

    @petethehandyman9185

    4 жыл бұрын

    PD8 SPECIAL OPSthanks I went back and watched it again I see the tape I’ve never seen it done that way before What ever works

  • @pd8specialops880

    @pd8specialops880

    4 жыл бұрын

    @@petethehandyman9185 me either acually. I always hang mine. @HANDYWORKS

  • @truestarsolutions

    @truestarsolutions

    4 жыл бұрын

    Every painter I know hangs them. It takes too much time . I've been mastering this technique for about 7 years now. And it works much better. Took me 3days to do the job 🙌

  • @petethehandyman9185

    @petethehandyman9185

    4 жыл бұрын

    True Star looks like you have it mastered, as long as the end result looks good and you save time, win win

  • @sy-ky_buddy4603
    @sy-ky_buddy46033 жыл бұрын

    Cabinets peeling within 6 months, id bet anything on it.

  • @singlefather01
    @singlefather01 Жыл бұрын

    Nice job? Are you guys serious?