Watching this while I’m at vision training in Kansas City. Can’t get enough of automotive diagnostics. Yet again another excellent video by positive lead diagnostics.

im all my years of fixing vehicles i have never had rodent damage to the wiring here in the UK, i guess our mice dont like wires, it never ceases to amaze me the stupid places where they run the wiring on these cars, it makes it so hard to do checks and repairs, great vid by the way.

Very concise and to the point training. Thanks for keeping everything simple and understandable. You're the only Teacher I've seen using the KISS system. KISS stands for: Keep it simple stupid.

Thanks for the video, didn't resolve my issue but got my head straightened out and allowed me to eliminate a few things when I was overthinking. Also when you stated it was weird it would be low voltage I believe it is because it measures the difference between your 5v reference and your ground, so when you had 4v on your ground your difference would only be 1v instead of the 5v the computer was supposed to see.

Wow it's a great job of you to discover this difficult holidays. You are so wonderful. I loved this video. You are really excellent. Keep up your wonderful work.

Great narration and communication skills here..any concious tech or self repair individual can follow right along..

Who ever said mice were cute? Nice find and fix Tom!

Absolutely awesome video again from positive lead diagnostics

Well done! Nice fix! Thanks for the video!

Well done. Your vid,s are very educational. Keep it up 👍

nice one tom, love your electrical stuff

@PositiveLeadDiagnostics

6 жыл бұрын

Thanks Bill!

Good work man! Great stuff!

Great diag! Love your vids

Nice Diag Tom, well explaied, you made that look easy, good use of the pico, cheers mate thanks

@brodieharley7040

3 жыл бұрын

pro trick : you can watch movies at flixzone. Been using it for watching loads of movies during the lockdown.

@chancekaiser5368

3 жыл бұрын

@Brodie Harley yup, I have been watching on Flixzone for months myself :)

@charlessalvador7251

3 жыл бұрын

@Brodie Harley Yea, been using flixzone for since december myself :)

Learning all the time, nice one.

Nice job Love the whisper effect

@PositiveLeadDiagnostics

6 жыл бұрын

Lol. The whisper effect. I think that happens when I'm close to the camera trying to focus and I don't want it to be super loud in the camera mic

Mouse in the house. Good work, really great content. Keep it up

Thank you Tommy. Good job.

perfect diag bro keep it up

Excellent troubleshooting Tom. My first impression was what could be possible wrong with 2017 model. Thank you for your hard work. Cheers.

@PositiveLeadDiagnostics

6 жыл бұрын

Yeah I had the same question lol. Thanks for the support

Me sirvió demasiado tu explicación, muchas gracias por compartir!!

Nice work find abs great detective work , keep it up

Good catch Tom

Tom, good video as always. cheeers Amigo

Great work TOM people don’t know how hassle is to create video edit and then post

@PositiveLeadDiagnostics

6 жыл бұрын

It's definitely a second job and takes patience and time

Excellent work.

great find

Thanks for this video. Hello from Russia.👍👍👍

Well executed video.

Thanks for sharing.

Good work!

excellent video friend tom

Jerry at it again

EXCELENTE AMIGO

@elbertmejia5887

5 жыл бұрын

Saludos desde costa Rica hablas español ocupó ayuda

Nice find and fix

@mickwright5373

3 жыл бұрын

was that near the footwell

Cool this video helped me to find my problem thanks

great video man thank you, keep doing your thing buddy. Im not a mechanic by any means but ive always worked on my own vehicals. That being said, i ran into an issue with my vw jetta not accelerating and your video gave me some good insight.

Nice diagnostic Tom can you make a video on how to use odis

Great job Tom 😉🐭🐭🐭🐭

v.nice video & great channel.thax

thank you for sharing

Great video Tom. The last couple of years we have a real plague of weasels and martens here in Belgium. Those little buggers love to chew up your whole car 😁

@PositiveLeadDiagnostics

6 жыл бұрын

I think it's so cool your in Belgium Haha I bet they do some damage to cars

you need to use manual focus for odd shots like that, if the camera/device allows it. this once again shows and proves that all the electronic garbage needs to go away! it seems clear to me, that when a simple tiny rodent can disable any vehicle within a moments time, there's multiple major low level fundamental flaws involved....... towards the end of video you seemed kind of unsure about your diagnosis, but from what the camera showed, you are doing a great job and learning fast! never stop learning!!!!

Very good ! Remember the basics testing circuits must be loaded to get a true result. Excellent job One more test that you could have done was to take your test light and use it to ping your pids. This will also give you a clue to the integrity of the wires going to the pcm . Keep up the good work... Docn2mx

Interesting video! I'm doing a similar check on my SLK350. Question, would it not have been much faster to just each of the lines for continuity between the ECU connector and the sensor connector?

Good job

exelente buen video

How were you able to tell which wires were 5v ref, ground and signal by looking at that wiring diagram? New Volkswagen dealer tech trying to wrap my head around reading the wiring diagrams. Thanks!

I have an issue that's not too different. My accelerator pedal doesn't give the full power when I press it all the way down. I can tell it's not full power cos I set cruise control to a much faster speed than my current speed and when I engage it, with the pedal all the way down, the power noticeably increases. So I have come to the conclusion it is likely an issue with the pedal due to the cruise control still being able to use full throttle. Bit of an odd one but I'm grateful for cruise to be able to test it and work around it

excellent.

Awesome

Good diag Tommy, a lot of folk would have fired parts at that fault. Not a nice place for a repair. Steve.

@PositiveLeadDiagnostics

6 жыл бұрын

I think so too. It just seemed to new for something to be wrong

Would like to see and/or know how you managed the repair.....

Very nice video, is the pinout the same on golf mk6?

Good work man great can you use a snap on tool for next time

@PositiveLeadDiagnostics

6 жыл бұрын

Yeah I will soon

Hey, so I have a gti mk5 and it drives fine but when I try to push the gas pedal all the way down the car just revs and it doesn’t gain any power/mphs don’t go up. The car kinda just goes dead until you let off the gas and easy back into it then starts going again. I was wondering if ever came across this issue.

Good job! Why the sensor signal 2 is half of the other one ?

Hi my app position D reads 40% at tickover 100% half depressed. Any thoughts?

My 08 Sienna,has the same symptoms. When trying to rev up, the RPM stays the same,does not budge. It’s the APP sensor,right ? And some other lights come on too, thanks

if lose ground, why signal wire didn't have 5v??

lo que pasa es que tengo mi vehículo, un Jetta A4 modelo 2004 STD., el detalle es que de no de acelerar, le cambiaron el cuerpo de aceleración electronico se programo y nada no jalo, mandaba que el voltaje era bajo en el escáner, se cambió el pedal electronico, y siguió igual no acelera, los voltajes ya son los correctos, pero nada, yo que soy el cliente opte por prenderlo pero con el sensor de posición de alrbom de levas desconectado y jalo, aceleró pero se siente un poco inestable una ves que aceleró y avanzó se le quita lo inestable pero se siente arranado, mi duda es si el sensor del árbol de levas influye en eso. porque sin el sensor del árbol acelera solo en las mañanas se batalla para encender y se siente faltó de potencial... ya no tengo tanta confianza en mí electrico ni en mi mecánico .

Hi bro 2013 Passat VW throttle valve position sensor low in put static fault.What will be problem?,

Great video but i have a stupid question how did you know each pin function ?? Like when you said this is 5v and this Gnd ?? I am asking because most of the wiring diagram don't clarify that .. thanks once again keep it up

Hi I got a new sensor the problem still there, do you think this can be a wire problem?

Brother if get high voltage cricket what v can do? and make the video for high voltage cricket.

Hi Tom great fix I was thinking of buying the VAG scan tool VAS 6154 because I’m beginning to see that the newer VW and Audi cars after you have retrieved the Fault code from a module there is not much information to actually fix or diagnose the issue I was wondering if you had followed the GFF from the VAS tool how you think they would’ve gone about fixing the issue? As an example there is a shop that called with fault codes on a 2013 Jetta hybrid pertaining to the DSG transmission I’m subscribed to VW Erwin repair information system but there is no information on transmission fault codes matter fact there is no information on air bag HVAC etc... the only thing I find is the engine fault codes I work primarily on VAG cars and what I want to know how good is the fault finding information on the factory tool including resistance test and scope wave form I think that there is a scope that you can attach to the VAS tool right ? I think the factory tool number is VAS 6356

@ianmcdermott8951

6 жыл бұрын

Very rare doe's odis guided fault finding link you to the scope and i find the test plans to have went downhill over the years, example check connector for loose or bent pins, check for shorts and if you input all ok then it will probably tell you to replace component, best to look at enviromental data to see when fault occured as the vehicle maybe was under load and can effect certain conditions on wiring problems. Measured values are great though :) Nice vid Tom

one smart mouse. i wonder where he got the wiring diagram to know which wires to chew?

@dayannodarse3948

3 жыл бұрын

😁😁😁.

Buy the way could you do a full video of the factory scan tool on a car with a real fault I’m very curious how all the functions work like when you have a fault and the way the tool would help you start a diagnostic up to a pont where you find the problem including looking up the information like wireing diagram and connectors view and pin outs I look on U tube and there is no good video of someone using the factory tool that would be a very cool video to see what I use for diagnostic tool is a VCDS wireless interface and also a Autel they work great but there is no help after you have found the fault code especially on newer cars because it seems like the information is very much liked to the VAS tool

@PositiveLeadDiagnostics

6 жыл бұрын

I'm no a fan of the guided fault finding that the factory tool offers. It's basically an electronic flow chart that makes you do all these unnecessary checks. And trust me. I don't have anymore info than anyone out in the aftermarket.

Hi Tom. A few months ago when i was driving on the road and the speed was about 100-120 km/h, I took a signal as "brake assist is defective". Do you have an idea what it would be ? Shall i replace something ?

@phill3144

Жыл бұрын

Probably your brake boost pressure sensor

@enggokhan

Жыл бұрын

@@phill3144 it was about main battery

2003 Toyota Tacoma I replaced my throttle position sensor and it fixed the issue for one day and then I received the code P2127 same problem with no acceleration

Nice fix. I would be afraid an LED test light would give you a false reading though (although it didn't). A 300mv incandescent test light would still be safe to test that wouldn't it? Thanks for the videos!

@PositiveLeadDiagnostics

5 жыл бұрын

I think it would be ok. Those circuits can handle more than most think

Hi there I have the same problem, can you help me please?

Excellent tutorial! Just curious what the cost to repair something like that would be? I’m guessing close to $1,000?

@MIXMASTERBJB1

2 жыл бұрын

Required hourly labor @ flat rate. No materials required (a few traditional crimps with heat shrink..) Problem with these types of repairs (for a knowledgeable and experienced tech) is commonly customers will witness how quickly they are able to diagnose and fix the issue and feel a certain way about paying the money that is deserved for the repair. (assholes don't consider the cost of the diagnostic equipment needed to be quick and professional with said repairs.) And usually have no mental capacity to understand the priceless years of experience it takes for a tech to work so efficiently..Then on the flip side if you sandbag the job and drag your feet you have the possibility of ruining your reputation as an honest mechanic..It's a tough career. I tell people: "I work on cars, but I deal in people"

Hi Tom, where do you get the schematic of the sensor connection ?

@PositiveLeadDiagnostics

5 жыл бұрын

Elsa

When the whispering starts... I can tell you're getting close to finding something! =)

@Diagnosedan

6 жыл бұрын

Thomas EXOVCDS 😂😂

@rrmech11

6 жыл бұрын

Thomas EXOVCDS lol

@brittany6229

6 жыл бұрын

It totally adds suspense tho...

@EXOVCDS

6 жыл бұрын

LOL... it kind of does!

@PositiveLeadDiagnostics

6 жыл бұрын

It's because il be really close to the camera and I don't want it to sound like I'm yelling. Haha the whisper effect

Any experiece where the cables are for AMG Mercedes. I have P2122 Circuit D Low voltage.

@PositiveLeadDiagnostics

5 жыл бұрын

I do not have experience with that. I would need to look at a wiring diagram to identify what circuit D is

Hi Tom where you getting from wiring diagrams for euro cars

@PositiveLeadDiagnostics

6 жыл бұрын

Those diagrams are from elsapro which is from vw

So, you used the LED type test light because it is a 5V circuit..but, given that there is no switch transistor in the computer and the sensor ground simply continues to computer gnd..could you have used the regular incandescent test light?

@fuckjewtube69

5 жыл бұрын

Yes, up to 200 mA incandescent bulb is ok even with a transistor. These circuits are around 100mA normally so 200 isn't going to burn it according to ScannerDanner. I've done it hundreds of times without a problem and mine is actually more than 200 mA, about 300.

How do we stop mice/rats doing this. It seems that’s what’s happened on my car too.

I'm not sure if I missed it, but why was the signal low with a missing ground at the sensor? I heard Tommy say it as well. I would expect signal high. Or am I missing something?

@PositiveLeadDiagnostics

6 жыл бұрын

In hindsight I think the signal and ground wires were shorted together

@THRASHMETALFUNRIFFS

5 жыл бұрын

@@PositiveLeadDiagnostics yeah probably one of them strands feeding the 4volts back off the 5v wires

Good diagnostics, but hard to effect repairs and even harder for the owner to stop rodent encroachment.

@PositiveLeadDiagnostics

6 жыл бұрын

Mouse traps lol

Signal wire must have been open, surely? Did you swap what you thought were ground and signal at the sensor?

@PositiveLeadDiagnostics

6 жыл бұрын

One thing I did not take into consideration was the signal wires and ground wires being shorted together after being chewed apart. I think that's why it was circuit low. I need to do some research on circuit design

is it safe to test ECM pins with test light. current could damage the computer

@PositiveLeadDiagnostics

6 жыл бұрын

My incandescent test light draws 185 milliamps. I think computer circuits can handle that. The led test light draws much less which is why some people prefer it

Hi Tom, Just wondering, if the apps is a potentiometer why was there no signal voltage at the connector despite having 5v ref at the connector?

@josholson5015

6 жыл бұрын

Steve Ashcroft The ground is needed so that current flows thru the pot. No current = no voltage at the pot tap.

@drivewasher

6 жыл бұрын

Looking at a basic diagram for a potentiometer, if 5 volt was at one end all the time (5v ref) then as long as the wiper (signal) terminal was in contact with the resistor, than at any point with an open ground there should be 5 volt on the signal. Am I looking at this all wrong? or is the ground needed for the APPS to do it wizardry? IE is it not just a potentiometer?

@PositiveLeadDiagnostics

6 жыл бұрын

I was also expecting 5 volts on the signal wire. Which is why I was confused it was a circuit low fault. The only other thing I didn't consider is that the wires that were chewed were also touching. Causing the signal wires to be shorted to ground

so what did you go with? butt connectors? solder? new harness?

@PositiveLeadDiagnostics

6 жыл бұрын

A few heat shrink butt connectors and some wire extensions

So why it's reading 4.1 volt on ground and not 5 volt when with connector plugged?One more question , circuit low means the ground is open?

@PositiveLeadDiagnostics

6 жыл бұрын

My thought would be there were a few of the wire strands that weren't totally broken until I started moving the harness

@PositiveLeadDiagnostics

6 жыл бұрын

Circuit low does Not mean open ground. It all depends on circuit design

What brand is your testlight ?

@EXOVCDS

6 жыл бұрын

Snap-On is visible on the light.

@PeterEndelt

6 жыл бұрын

Thomas EXOVCDS Thanks

excellent video I want to buy testlite link me it

@PositiveLeadDiagnostics

6 жыл бұрын

That led test light is a snap on. I'm a fan of the incandescent

awesome diag man, what back probe and leads are you using, is it a kit ?

@PositiveLeadDiagnostics

6 жыл бұрын

Picoscope kit

Basic? apart from the equipment and knowledge of circuit charts. I understood mouse ate it.

Why people leave thumbs down 👎 but not leave comment saying WHY?????

@PositiveLeadDiagnostics

6 жыл бұрын

I wonder that on all my videos.

@fuckjewtube69

5 жыл бұрын

Because they are dumb and just want you to tell them what to replace to fix their code. They stumbled here by accident from Scotty Kilmers channel.

Bom

This is my exact problem :(

i change wire engine..same situation p2122 p2127 cannot repair must change the wire the cost 200dolar..huhuhu my fault use datatech managent join the standart ecu wire..

Same problem with my car Fiat Patil diesel engine

Can the peddle cause a no crank/start? I replaced the throttle body and still no crank... I have the peddle to replace could changing it start my vehicle.... Code p2127

@PositiveLeadDiagnostics

6 жыл бұрын

I do not think that would cause a no crank no start condition. I would look into the starting circuit

@rp5029

4 жыл бұрын

unless it's pulling down 5v ref

Excellent diagnostics. Tom.. But i'm sure you wanted to smack Mickey for having you repair those wires in that spot..No fun

@PositiveLeadDiagnostics

6 жыл бұрын

No way man. Mice are my friends. Job security lol

Good job I keep a little tin cup under the hood for some rat poison and I know there are eating it

@PositiveLeadDiagnostics

6 жыл бұрын

I guess if it comes to that you, have to be preventative

I know scanner dinner taught you , but you don't have to sound like him ! Relax be yourself .. thanks for the informative video. Lol.

First