Crc anti corrosion and dielectric should be standard issue! Those 2 items are gold. Great job educating your fan base. I’m sure people get tired of me saying “Nick said…”

@NavarreKayakFishing

2 жыл бұрын

Those two items save a ton of headache down the road.

I have taken all your expert advise and after flipping my Predator no issues

Good advice Nick !! Thanks a bunch

@NavarreKayakFishing

2 жыл бұрын

Thanks for watching!

Glad you do the videos. They help a bunch

@NavarreKayakFishing

2 жыл бұрын

I’m glad people watch haha

I know this might be overkill, but I’ve sprayed that corrosion inhibitor on the pedal itself (I started hearing noise). I sprayed it on the drive itself as well. Anything metal or might get wet, it’s on 🙌

Great tip Nick !! I have been doing this since I saw your earlier videos

@NavarreKayakFishing

2 жыл бұрын

I figured it was a good time for a refresher. Simple steps that make a big difference.

Good stuff Nick🤝🏼 I've done this every sense you put out the 1st video of the this type of tip. It has been a pin saver 😂. Thanks for the updated video on how you do it 🙂🤝🏼. Until the next one ✌🏼 buddy

@NavarreKayakFishing

2 жыл бұрын

I figured it would be nice to remake it with both types of drives this time just as quick reminder. Makes a huge difference and it’s easy to do.

Good advice and information. Thanks.

@NavarreKayakFishing

9 ай бұрын

Thanks for watching!

Thanks for the video it helps greatly. I actually watched one og your previous maintenance videos and each season i take the drive and lube it up with the marine CRC. I habe had no issues with my 2019 drive and still have the original shear pin.

@NavarreKayakFishing

2 жыл бұрын

Exactly!!!! Unless you hit something and “shear” the shear pin you shouldn’t have to change it.

Thank you for the very helpful video!!!!!!

@NavarreKayakFishing

Жыл бұрын

Thanks for watching, Pam.

Thanks Nick I need to do the shear pin thing.

@NavarreKayakFishing

2 жыл бұрын

Easy to do and makes a huge difference.

Oh shoot! I haven’t done that on any of my pedal drives. I need to check those, thanks.

@NavarreKayakFishing

2 жыл бұрын

You will probably find a bit of corrosion.

1st one

Can you make a sheer pin out of plastic, that floats? Let me know and I’ll buy one.

@NavarreKayakFishing

Жыл бұрын

We’ve considered it and even tinkered around with it. I’ll see what I can do. It has its issues though.

Do you use the Dielectric grease on the transducer connector for your fish finder?

@NavarreKayakFishing

2 жыл бұрын

Yes, sir. Stops corrosion.

What reapplication frequency would recommend for the shear pin treatment?

@NavarreKayakFishing

2 жыл бұрын

It’s honestly not needed to frequently. Maybe once every two months.

Hello just got my pdl 120. Would you recommend this to non saltwater users. Will be ordering a lot from you . Thanks

@NavarreKayakFishing

2 жыл бұрын

Yes. It will still rust even in freshwater.

New subscriber here Nick. Would you know thread size for the epdl+ and the shear pin size as O/T could not provide it? They referred me to you. Sae or meteric? Also how do i order replacements of these from you please?

@NavarreKayakFishing

2 ай бұрын

Thread size is 3/8 -24. Shear pin size - im not sorry but we do sell them on the website. Here's a link - navarrekayakfishing.com/shop/old-town-shear-pin/

Why do you take the star washer off?

@NavarreKayakFishing

Жыл бұрын

Because it’s not needed. The nut works the same way a nyloc nut works. No star washer required.

Can I use this on hobie drive?

@NavarreKayakFishing

2 жыл бұрын

You can use it on anything that you’re worried about rusting.

The spray is discontinued on Amazon it says 🇨🇦

@NavarreKayakFishing

2 жыл бұрын

I just purchased more the other day. Thinks it’s just in Canada?

@babycheesa8020

2 жыл бұрын

@@NavarreKayakFishing yes we can’t get it.

I want to support you brother, but I also do 3d printing, and asking ANYBODY to pay 25 dollars for .10 cents worth of fillament and maybe 50 cent for an insert is just ludicrous.

@NavarreKayakFishing

Жыл бұрын

You’re missing a few dozen expenses that are required to run a business. 3D printing a few items here and there (not saying that’s what you do) is far different then using 3D Printing as a means of manufacturing. If you only factor in the cost of material then the majority of items in the world are injection molded for $0.01

@paulbunyun-xi9by

5 ай бұрын

it's on sale,,it was 25.00 now 20.00 plus shipping