I had a Taylor 414 series acoustic. An Eastman E60M fell into my lap. Needless to say, the Taylor is gone and the Eastman is my main acoustic. It is an incredible guitar! I highly recommend Eastman guitars to people I meet.

@stavros693000

Жыл бұрын

the eastman e60m is a high end acoustic though!

@sustainablelife1st

Жыл бұрын

@@stavros693000 E6-OM, $1000 (china). Compared to Taylor 414 $2-3K (USA)

@stavros693000

Жыл бұрын

@@sustainablelife1st Its still a high end acoustic though @ $1600 AUD.....its half the price of a taylor because manufacturing is much cheaper in china than USA & you pay more for the Taylor brand name....both guitars are solid wood, back, sides and face/sound board....both made of high quality timber. ( Eastman solid mahogany & Taylor solid rosewood with spruce top) Both timbers are high quality giving warm tones. Just comes down to personal preference! Both have bone nut & saddles.....A lot of folks prefer the Eastman e60 over the taylor 414.....anyways my point is just because one guitar cost more does not make it better...once you get over approx $1400 you are only paying extra for brand name & cosmetics/Bling!

Comparing a well played in acoustic to a new, off-the-line one is always going to be an unfair advantage. Newer acoustics tend to be pretty stiff feeling and need some time to really come into their own. Overall the Eastman brand makes some really quality instruments!

@myeyesarewaiting

2 жыл бұрын

yeah, I reckon that Eastman will open out over time and the bass will get pulled into check.

@seanbaines

Жыл бұрын

That is exactly what has happened/is happening with my two Eastmans. The older one has opened up well. It's now bigger and richer voiced, and the high end is starting to show after a low-mid dominated youth. (That's partly due to the all-sapele construction, including top. It's never going to be a high end shimmer type guitar.) My spruce top ovangkol construction is newer. I got it at the end of May. it was louder from the get-go, and has always had more top end shimmer. But will take awhile to open up into its full voice. I can hear it starting to develop. I'm playing it a lot; loud, soft, strummed, picked, fingerpicked. I think the overtones on this one are going to be really good.

@thrumyeyesphoto

Жыл бұрын

@@seanbaines I've owned the same Martin 00-18h for the past 12 years. I bought it used, and pretty well-played, and over my ownership the guitar has opened up quite a bit. It has literally hundreds and hundreds of hours or play time as my main acoustic and it absolutely rings like a bell now. Pulling off a worn/reliced/vintage-feeling Electric guitar is pretty easy. Doing it on an acoustic is a totally different ballgame.

@natemink572

Жыл бұрын

@@myeyesarewaiting The boominess will only get worse, you can find the same phenomenon on 1960's Gibsons. It's a poorly made guitar compared to the Bourgeois.

@realtruenorth

Жыл бұрын

What bullsh!t, because I can pull a good acoustic off the shelf at a guitar center that is brand new, and it's still gonna sound way way better than some communist made crap.

I have an Eastman SS LTD and I love it. Being a student I needed a nice full solid guitar for recordings and live session, and without a brand like Eastman I could never afford it. As always your videos are incredible, you underlined the different sounds that different body shapes have perfectly. Personally for fingerstyle I do prefere my Taylor, but the Slope (IMO) it's the best for strumming :)

@sam-ww1wk

Ай бұрын

Agreed. I think Eastman shines in their ultra budge all solids. Past that, you can get into a Larrivee, etc. But in that just under a K range, I think they're nailing it.

Eastman making a strong play to earn a place at the table. Their jazz guitars have been objects of lust for 20+ years. Love that they’re finding their own take on the classic designs with their unique finishing.

I don't feel like the Eastman sounds broken in. I'd be curious to see this comparison in 5 more years

@shankrl1

2 жыл бұрын

He’s not gonna play that guitar consistently for 5 years, but yeah I agree

@jakebrandt5882

2 жыл бұрын

Eastman makes a TC (thermocured) model that kind of speeds up that process, if not comes really close with it out of the box. Great instruments.

@petrucci973

Жыл бұрын

THIS!

@aaronjones6854

Жыл бұрын

I kinda think the opposite. The Eastman sounds slightly fuller to my ear.

@ScottHz

Жыл бұрын

that Eastman 00 is a cannon! I first heard it on Rhett’s recent bluegrass video about Jake Workman.

As an owner of Eastman SS myself, one thing that is not mentioned is that it uses an Adirondack spruce top, which is a bit stiffer than the more standard Sitka. Adi has a pronounced break in period, and while it will sound a little compressed at first, it really open up tremendously with a bit of time.

Hats off to you Rhett, well said!!! Just because you are born or live in a certain country doesn't determin your skill as a luthier. There are certain factors that may influence your skill, however it doesnt matter what country a guitar comes from as well as it is built well and sounds good.

@johnfox2727

Жыл бұрын

@Debbin McCarthy who said anything about China ... what about Deusenberg guitars from Germany? Or Terada making Gretsch in Japan? These are some amazingly built guitars that dont get the respect they deserve because they are "not american".

Really a great video and it was interesting hearing the differences between the two guitars. Quite a surprising difference in tone. I know a lot of concerns with overseas manufacting stems from ethical concerns as opposed to quality concerns. it’s undeniable that the manufacturing quality overseas is fantastic, and many products rival if not surpasses stuff made in the USA. I like pushing companies a bit to understand how their factories are run overseas to do my part to avoid unethical treatment of workers. Many of them go above and beyond to ensure their workers are treated fairly, and that’s fantastic. Just my 2 cents. Great video. PS: I signed up for the cowboy chord break out because I play the same chords for everything. I hope the course can save me from myself.

@FamousByFriday

Жыл бұрын

I’m surprised this is the only comment about ethics. I mean, are people thinking that Chinese people aren’t capable of being incredible luthiers or that they don’t have access to similar quality materials? The difference is how much the factory pays their laborers and how much time each guitar is given.

I did a video comparing my Eastman E10ss to my Martin D28 and the popular favorite from the comments has been the Eastman. I would have to pick the Eastman SS in this video as well. I like the bottom heavy sound that the Eastman gives with the Adirondack top. But in a mix, you would definitely have to roll some of that out. They're doing amazing things!

I have the E8OM from Eastman and it’s mental good. The nut and fret work is beautiful and it has a purity and clarity to it that I love. Unbelievable instrument.

@davideckford1282

2 күн бұрын

I agree, the E8om is a very good guitar

I have a Martin D-18 and an Eastman e20om which is a rosewood and Adirondack om body. They are both great guitars. The quality, sound, fit and finish, etc., are all there on the Eastman. Love my D-18 and it will be my lifetime guitar, but the Eastman is great, too. Thanks for this comparison. Very helpful and informative.

To me the Eastman sounds better. As for set up, I have found that it can make a big difference in the sound. Every guitar has a "sweet spot" and the set up is how you find it. I' like to know what the fit and finish issues are and, weather the guitars have bolt on necks or glued in. To me the neck attachment is important because if the neck angle can be adjusted easily thats a big plus. The Eastman may loose alot once the strings are lowered.

@jamierobinson777.

Жыл бұрын

Thanks fan ! I appreciate 🙏"Congrats🥳🎆 You're Selected,have something for you *LUCKY WINNER‼🎁🔛⤴️*..

@slowwwwBurnnnn813

Жыл бұрын

Agreed

@philipdeppen3189

11 ай бұрын

The Eastman won’t lose anything sanding the saddle down to lower strings if you slot the bridge pins to accept unslotted pins. As well as installing a denser quality bone saddle

Great comparison. Being an Eastman owner, (e20d) I really appreciate what you have to say. I doubt I will ever own a Bourgeois, but hats off to Dana for making a superior dreadnought.

@kamarienedwards1757

5 ай бұрын

Maybe you’ll be able to own the touchstone series?

hey Rhett, thank you very much for your videos, if it wasn't for them I wouldn't have 50% of the gear knowledge I have. and they incredibly fun to watch.

I agree about the guitar being a tool for the job. My acoustic is a 1963 Gibson Hummingbird that I purchased from the original owner in 1964. I got this guitar for folk and bluegrass music and it works great for that. In my folk groups we did not have a bass so the full chords from the Hummingbird had to fill in that part as the other guitarist was using a Martin D-18. The Hummingbird was able to cut through the mix and do the job I needed it to do. Same with the bluegrass groups, although at some point we did get a bass player, but I still liked the fuller more bass sound of the Hummingbird as compared to a Martin, Mossman, Taylor, or Ovation. Fortunately, there are a lot of really nice instruments out there these days that are not all that expensive. Take a look at the Andrew White guitars as an example.

I don't think it ever mattered where it was made. As long as you liked the sound, feel, and look.

I have some electric guitars that were made in Indonesia in the past few years, and they have been excellent--better than the Chinese-made guitars I have tried. And of course the Korean-made Gretsch guitars are terrific.

I have the Eastman E20SS with gloss nitro finish. It definitely opened up after breaking in. It's awesome. I think you said the Eastman has Sitka spruce top, their website says Adirondack Spruce. Great playing, I enjoyed hearing them both the way you mixed them back and forth.

Update! I grabbed an Eastman E20OOSS and I am blown away at the quality of the build, certificate of authentication, hard case, and amazing tone that is singing from this guitar. Thanks for this demo Rhett! I now have one of my most favorite guitars. 🤘❤

For what the Chinese cost I bought a used Martin D18 Golden Era love that guitar, one of the best I heard an the best I ever owned

Rhett- although it maybe true that overseas construction quality might be competitive with USA made guitars, I was surprised that you didn’t point out that there is value in supporting businesses and their hard working employees who build products right here in the US. Those companies and their employees also benefit other businesses and workers in their local communities. In the long run we all benefit from companies like Martin, Taylor, PRS, Gibson and Fender building world class instruments here in the USA!

@lowellcalavera6045

2 жыл бұрын

On the import question: I play every day, on my Chinese Guild(s) my Japanese Yamaha, and my Indonesian Recording King, and they all are built well, look good, sound great, and get better every year. Would I like to buy American? Would I like a handmade 000 built by one person ? Absolutely. But are either of those options necessary? No. We've been sold out by our politicians making laws to favor American companies sending our manufacturing jobs overseas. So here we are. Unless you're a collector, or just have extra money laying around, there is no guitar in the world worth 4, or 5, or $6000. They're an affectation. I've played dozens, American Gibsons, Martins, Guilds, Santa Cruz, and there's just not a $3000 difference in sound and playability. In my opinion.

@Nut-ml5wc

2 жыл бұрын

@@lowellcalavera6045 Would you like to support China where there are currently concentration camps? Would you like to support Chinese slave labor?

@damienalvarez2957

2 жыл бұрын

@@Nut-ml5wc what are you typing your comment on?

@davidharvey8812

Жыл бұрын

Maybe he just forgot as people are busy . Try and stop being surprised by what someone else may or may not say 😊

@Nut-ml5wc

Жыл бұрын

@@damienalvarez2957 not a Chinese-made computer because I refuse to support slavery and concentration camps. How about you?

There are so many things to consider that make up the final tone.... wood types, finish, bracing, string types, nut types, even your pick will change the final tone. That being said, they both sound great however I found your Bourgeois more appealing to my ears. I have an Eastman ES-175 copy that is a great player. I felt better gigging it over a real-deal Gibson ES-175. Just safer!!

Well done comparison, I love how the Bourgeois projects its tone with clarity and resonance

I bought my first of two Eastman mandolins, on the internet, from a dealer in Pensacola, Florida; Bluesangels Music. I was very happy with my purchase. One day I stopped by to thank them and tell them how great I thought the Eastman mandolins were. They agreed but said that the Eastman guitars were even more popular with their customers!

I've heard many positive things about Eastman acoustics, and I own and enjoy one of their SB59V solid body electrics. That being said, when I last shopped acoustics and decided on a Collings OM I demoed some of the Eastman acoustics. The Collings was in a complete different league in all areas, tone, playability, build quality. I liked the Collings so much I snagged D1AT a few months after getting the OM2HT. For this comparison, the varnish finish on the Eastman is going to be preferential to the thickish (IMHO) poly on Bourgeois.

@FrankLafone

2 жыл бұрын

Best guitar I've ever played - acoustic or electric - was a Collings OM2HA. I still dream about that guitar. I don't live in Collings money tax brackets but man... talk about a dream! Great instruments I literally dream of owning some day.

@MrPhins

2 жыл бұрын

I would hope it's in another class. Isn't the Collings close to $6k?

I don’t want to get into Geo-politics, but YES it does matter. Especially when it comes to this industry, where a lot of artistry and craftsmanship is in play (we are not talking mass production electronics or cars where a high degree of mechanization predominates) We should support our local/national musical instruments industry. It is not a matter of “it sounds about the same at half the price”… Consider the labor conditions in China that made that guitar, it is cheap for a reason, and it is not because they invented a “better mousetrap” they exploit and squeeze a very cheap labor force… Other than that, interesting comparison. The Burgeois sounds better because more care was put into its design and manufacturing.

@JaredPitcher

2 жыл бұрын

But you also have to consider that "supporting local" is financially impossible for most people. If it wasn't for overseas manufacturing creating affordable options, I would never have been able to get into playing guitar. Buying "ethically" is a luxury a lot of us can't afford.

@baerit5090

2 жыл бұрын

@@JaredPitcher The more people that buy local the easier it'll be for everyone to buy local. Part of the reason it's so expensive is because locals don't get the business they need in order to keep those prices lower. "Supporting local is financially impossible" is just a cop out and it ultimately hurts everyone.

@MrDblStop

2 жыл бұрын

@@baerit5090 Sounds like you have a lot of money. I spent 150 of our English pounds on my second hand Farida all solid woods acoustic which was 500 quid new a few years ago. For the money it is a beautiful guitar, and buying comparable in the UK just wouldn't be possible for me. Even in the States I guess you're looking at a lower end Martin in comparison, for way more than twice the price new. Some people really do not have the money to do that.

@JaredPitcher

2 жыл бұрын

@@baerit5090 That's absolutely not true, it's not a cop out, it's reality. How fortunate you must be to be able to afford expensive local products. But this is a corporate/business problem, and telling people they are the problem when they are forced to buy within their means is classist and ignorant.

@walterrizotto8668

2 жыл бұрын

It really is a matter of Geo-politics then. Good manufacturers can be found everywhere.

I've got an Eastman T59/V-RD semi-acoustic (basically, their nod towards a Gibson 355) and, for a fraction of the price of what inspired it, it's a quality hand-produced instrument. What particularly impressed was that, straight from its case, it had some real character. But the gold standard for me in terms of overseas vs. USA-made is my Tone Fox Elcaster. That has "custom shop" quality at an affordable price I can afford and it was like I'd known and played it "forever" from the moment I picked it up! It feels as worn-in and familiar as my beloved old 1978 Gibson The Paul which I've owned from new.

I own two Eastman Acoustic Guitars and they do "break in" over time ... No, they aren't top of the line and expensive, but they record very well . I ,initially, bought one because I was recording and my main acoustic was damaged due to a roadie ( still a dear friend of mine ) left my guitar behind the wheel of the equipment cartage truck. I needed to buy a guitar cheaply and immediately. It worked out very well. I agree 100% that if you love a guitar and it does what you need ... Bo0m! Always love your vids... keep 'em coming !

The Bourgeois has more presence and more evenness throughout the frequency spectrum. In the end, you usually get what you pay for.

@lowellcalavera6045

2 жыл бұрын

True, but it's been aging for 10 years

@markrossi5703

2 жыл бұрын

@@lowellcalavera6045 Personally, the difference that I hear is in the construction of the guitar itself.

@mattrogers1946

2 жыл бұрын

Buy something nice or buy something twice...

My last 2 guitar purchases were made in the USA and both expensive. I don’t regret paying more for a Taylor and a PRS. Their looks, feel, sound, and playability inspire me.

@RobbieF

2 жыл бұрын

I am a beginner ... 10 months in. I could not justify the cost of a Mexican Fender, let along a US manufactured guitar. I settled on a Squier Strat from China. Interestingly enough, I am starting to hear rumors that newer Squiers coming out of Indonesia do not have the same level of quality when compared to the ones that came of of China last year.

@jconner3891

Жыл бұрын

💯. Taylor’s are the best IMO

@marcusvaldes

Жыл бұрын

Yeah, but they don't sound better than an Eastman. Sorry, they just don't. I mean they sound good, but so do the Eastmans.

The Borgeois sounds indeed more balanced. But is way above my budget. In 1981 I bought a Epiphone PR725 build in 1978 from Japan. Stil playing it. It's not a Gibson or Borgeois or Marrin. But it does the job for me. It is still holding after more than 41 years

For sloped shoulder dread around $1.8k, there is the American made Iris DF or Martin DSS-17 that are excellent guitars. Iris guitars sell the minute they arrive at the dealer.

I have owned two Eastman jazz boxes and one Eastman mandolin. They were all nice instruments, well made and clearly a good value. Now whether to buy Chinese is a whole other issue of course.

I really like that hollow diamond shape inlays the Eastman has 😊

I had a chance to play an Eastman acoustic at a music store in Pidgeon Forge, TN. It was amazing! Loved the sound and feel of it! I ended up picking with it for about 45 minutes. I ALMOST bought it!

I have a killer $2,200 Seagull & my friend has a killer $300 Yamaha acoustic & his REALLY seems to deliver in recordings. It’s really crazy how something so much cheaper can have amazing tones

Two things to keep in mind. At the price point of both guitars, every instrument is going to sound different. So it's more about what appeals to you. Second, if a hand made American instrument make you feel better and inspires you more, that's not to be discounted. You need to be happy with what you have. Also as a gigging musiscian I like the idea of something like taking the eastman on the road and keeping the irreplaceable instrument for YOU at home. Good enough is good enough.

@jasonpillingmusic

2 жыл бұрын

Ya, I use specialized guitars sometimes for recording. But I use just one for performing, because the limits of nice pickup is a great equalizer.

@jamespitman3357

2 жыл бұрын

agree

@lowellcalavera6045

2 жыл бұрын

Well said.

The Bourgeois to me has a slight edge in sound but the Eastman's do sound good! Nice review Rhett.

@michael_caz_nyc

2 жыл бұрын

Agree Stephen.

I own two Eastmans. E10OM-TC and a E6D-TC. Very happy with them and the LR Baggs Anthem. The E10OM has great overtones and keeps up volume wise with the dreadnought.

I can't get out enough of your usual electric guitar related videos, but when you do acoustic guitar related content it's always a special treat! Thanks!

I own an Eastman D18 clone, and it's a fantastic guitar. Plays well, sounds great. I liked the sound of both guitars you demoed. Through the KZread compression algorithm the Eastman actually sounded a bit brighter, but I'm sure that was different in the room with you.

The Eastman has more low end, it sounds great. I don't know if it sounds $2100, though. For that price you have a lot of options.

@synonyx

Жыл бұрын

I'd buy a Taylor for that kind of $$$

Absolutely fantastic background when you were recording and playing the guitars. Loved this vid

The Eastman has a low mid/bass that’s a little woofy. It would probably shine if it was in Nashville tuning/high strung. But that bourgeois has fantastic clarity! FoH and audio engineers will have an easy time mixing that guitar.

@edgaeta2001

Жыл бұрын

I agreed with everything you said. I am a retired FOH engineer and I found the Eastman to be a little bit dark in tone. I've always found I could help darken a tone easier than I could give it Clarity that isn't there. Your comment was very well stated.

I bought an Eastman OM at the end of 2020 that's basically a Martin 000-28 clone: Rosewood back and sides, Sitka spruce top, Bone nut and saddle. Rosewood bridge. Ebony fretboard. Open-Gear tuners. Lacquer finish. It is hands-down the best guitar I own right now...and this is after I got my 50's Les Paul Standard. Also, it should be pointed out that your Bourgeois has a few years of being played and "opened up" that the Eastmans (Eastmen?) don't have yet. Mine sounds beautiful now as I play it nearly every day. It's every much as Martin, other than the Logo on the headstock. Also, of course, the resale value won't be anywhere near a Martin or Bourgeois. But I tend to buy guitars to play and not invest in...but that's just me. I highly recommend Eastman though.

@toploadtele

2 жыл бұрын

I know you... hee hee! Didn't one of your acoustics get stolen out of your car at a convenience store after a gig recently? That blows Scott, I sure hope its recovered!

@ksgant

2 жыл бұрын

@@toploadtele Different person I guess. I haven't gigged for quite a while.

Chibson has entered the chat.

Nice comparison video. It’s quite clear which is the better guitar, but that Eastman sounds beautiful. Unfortunately that finish reminds me of a little toy cowboy guitar. I keep picturing it with a piece of twine for a guitar strap.

I just bought an Eastman semi-hollow electric. Innovative design and top notch workmanship. $1500 with case.

I always hear that aging enhances the sound of an all-solid wood guitar. If so, is comparing an aged guitar to a new guitar reasonable?

@zero318

2 жыл бұрын

Excellent point, Jon...you just negated the experiment. 😀

@wordragon

2 жыл бұрын

@@zero318 -Lol

@ckturvey

2 жыл бұрын

The Eastman does sound like a new guitar that hasn't fully "opened up". It will sound closer to the Bourgeois over time. Whether its better will be the subject of the follow up in 2032! :)

@zero318

2 жыл бұрын

@@ckturvey , I have a Recording King RAJ-27 slope shoulder that's about ten years old and left over from when we had our guitar shop. This Eastman reminds me of the RK in many ways...the RK after a decade really chimes out now but did sound much like the Eastman when it was new. Now as for which is better, guitars are a tool for me as well. If I can still pull the gig with a guitar that's half the money, guess which one is better? hehehehe

it's not that Chinese guitars are inferior...its that they're Chinese. china is similar to Russia in that its good people living under a crap government system. I wouldn't buy plastic cups made in china simply because of who it's benefiting, same goes for guitars, doesn't matter how nice it is.

@NewHopeAudio

2 жыл бұрын

I sincerely doubt the phone you’re holding wasn’t made in China. You’re repeating propaganda. The Sinophobia and Russophobia is so past due. You realize america is sold out to other countries because nothing is made here compared to the past. Your energy should be on the US government and corporations selling out American workers.

@mattrogers1946

2 жыл бұрын

Don't support sweat shop overseas....

@junyisu1235

3 ай бұрын

If you been to China，you will see China is peace. Fast develop cities. People there don‘t want wars. Chinese goverment work fine with many countries，unless some countries have “bad ideas”. There are no perfect countries and governments，but some national medias can lead people to misunderstanding others.

I don't usually comment on these videos. I picked up an Eastman E20D (dreadnought) 10 - 12 years ago while looking for a high end acoustic. (800.00 CDN used). This guitar is fantastic. After having it a few years I stopped looking for anything else... Gibson, Taylor, Martin and all the boutique builders make excellent guitars. But the Eastman stands up well against any of these. Everyone who plays it is always totally impressed and asked me where I had it set up. I haven't changed a thing on this guitar in all the time I've had it (except the strings of course). The neck is still perfect and the guitar finish has held up beautifully. This guitar is out 24/7. I live in Ontario Canada. Winters are very cold and summers are hot and humid. No need to tweak the truss rod or play with the action. It's rock solid, holds tune exceptionally well and sounds amazing. If your looking for a great sounding and well built instrument without breaking the bank do yourself a favor and check one these out. For the money I think you will be pleasantly surprised. Cheers all and happy picking no matter what you play.😀 Keep up the excellent content Rhett...

I have an Eastman acoustic - these are very well made guitars that punch FAR above their price points! One key to getting a great acoustic sound is to find the string make and gauge that sounds best on your individual guitar. I even find the pick choice significantly impacts the sound. As far as strings go, I would advise everyone (for both acoustic and electric) to keep a string diary - noting guitar, date put on, initial impressions of tone, projection, playability / bendability And then play it until that new-string brightness warms up and note that as well. Last, note how long they sound good. I find this really helpful!

@philipatoz

2 жыл бұрын

​@@soofitnsexy, on acoustic I have been using the Martin Martin MSP4100 Lights (.012 - .054) - I'm not sure if they are making them again or not (looks like they might be). Their supposed replacements (ones I used last), the MA540 / 92/8 Phosphorus Bronze Lights (.012 - .054), are also terrific strings - I absolutely tortured my last set and they sounded very good for a very long time. I think the 4100s might sound brassier and the 540s a bit warmer / darker. I don't like coated strings because I think it mutes the tone somewhat - would rather have crispness than longevity (plus coated strings are pricey!) As for picks, I've used every shape and material around, finally settling (after decades of experimenting) with the Fender 346 Shape "HEAVY" Classic Celluloid Rounded Triangle. I'm a klutz - always dropping picks - but the 346 is large, much easier to assertively hold, and if it shifts in your fingers, you can just rotate it to the next picking edge (or somewhere in-between, for slight variations in tone). It's thick, but not too thick, and has a really assertive and warm attack tone. But because it's larger than the typical (smaller) teardrop size / shape that most players use, I find that it flexes more and gives me that crisp "clack" that I like to hear on strumming and powerchords. And its flexibility makes it easy to play fast, double-picking lead stuff. (LOL - and I STILL managed to occasionally - but rarely - drop even these) Hope this helps!

@philipatoz

Жыл бұрын

@@soofitnsexy lights / .012 on my Eastman acoustic and my '71 Hofner (my cowboy guitar). Tried 13s and they were of no help tone-wise - and an absolute beast to bend.

I've had my eyes (and my heart) on a Guild DS-240 Memoir acoustic (made in 2021 somewhere overseas, solid Sitka spruce top, laminated mahogany back and sides) that sells for $450. It was on display side by side with a $3,500 Gibson acoustic dreadnought (I forget which one exactly): to my amazement, when I tried both out, the Guild just sounded perceptibly more alive, balanced and well-rounded. I'm frankly stumped. I feel conflicted (could my impressions possibly be incorrect?), but I think I'll end up buying it, if someone else does not snap it up before I do. I'm getting a feeling that we are currently living in a golden age of guitar making, and that being snobs who long for "vintage" at all costs works against us as players. The sound should matter most. The rest is for collectors, not players.

@robg1996

2 жыл бұрын

I think the Gibsons sound thin to my ears. Go with what you like. My favorite acoustic is an Ovation Elite that has amazing depth and nuance to my ears

I think I detected a slight bloom to the chords on the Eastman. I really liked that. I could never afford the Bourgeois. But both sounded great. Nice comparison Rhett.

@jimthethirdprobably

2 жыл бұрын

i wouldn't be able to afford either

your honesty is a joy to watch ,, great work matey

I have played an Eastman today, for the first time in my life. It was a dreadnought slope shoulder, like the one in the video, but with maple back and sides. It sounded absolutely great! It was really like playing a Gibson J-45... but half the price. It is true that when I looked at the Eastman closely, I could see minor issues: smalls marks under the frets in the fretboard side, not he best polish in some hiden places... Anyway, that means very little to me. The fact is it had great volume, incredible sustain and a lovely tone. And for the price of a Gibson or a Taylor you buy two Eastmans...

@hoangnguyennguyen1032

2 ай бұрын

Now that's a rarer find. I don't think they made that many of those.

The Eastman's low end boost can be tempting at first but when you mic them the chord voicings on the Bourgeois are way more intelligible and would not get lost as easily among other instruments if paying an accompaniment role. Perhaps the Eastman will age into a more balanced sound but its not going to change that much...

I’m in the supply chain world and its going to be interesting to see what happens with overseas guitar manufacturing. Over the past two years, manufacturers have started reconsidering overseas manufacturing, and more and more are relocating to the US, or whatever the target market is. It used to be that all companies wanted the leanest, cheapest manufacturing possible, and that usually means off shoring. Increasingly, companies are mor open to the added cost of domestic manufacturing if it means fewer supply chain issues. I would like to see if companies like Eastman would move to the US, and how that would affect the price of their instruments

@TranscendentBen

2 жыл бұрын

Of course with acoustic guitars, different woods come from different parts of the world, so it's still complicated.

@thirstypilgrim97

2 жыл бұрын

Hopefully the Silicon Chip industry follows suit.

A custom built guitar compared to a factory production model is never fair, but to be fair here, both the Eastmans and the Bourgouis all sound great based upon their make, price point, etc. But if I had to choose from the three and take it home, the Eastman dreadnought would actually take it. Yes, I caught the lower bass emphasis, but with the natural wood combination, and I like a little extra low end (it makes for a warmer sound to me, and is indigenous of rosewood and ebony imo) in a dreadnought. Besides, it would make a good compliment to my Martin DCM and my Washburn AE-20. As always, great video, Rhett, and thanks for taking the time to offer your thoughts.

I got a 2018 Gibson J35 recently - and I have to admit that that Eastman sounds very similar.

This is a great comparison. I have found that guitars from Korea and Japan tend to be noticeably superior to those coming from China (and the prices tend to reflect this as well especially from Japan). I would like to see some comparisons of guitars coming from these locals. Thanks for the video.

@drivenmad7676

2 жыл бұрын

Japanese make great guitars

@j.maddox940

2 жыл бұрын

Agreed. Even instruments coming out of Indonesia are beyond the vast majority of instruments MIC

@theshapeexists

Жыл бұрын

Agreed. Some of china's luthiers are catching up though. I bought a teton guitar last year made in China and I paid $300 for it and it definitely sounds as good as some $1000+ guitars

@cugir321

Жыл бұрын

Japanese guitars can be superior to USA guitars.

You didn't mention it, so I'm wondering if you are aware of the Eastman/Bourgeois collaboration. I think they are partially made (components like necks, fingerboards, headstocks) in China and assembled in the USA. Bourgeois Touchstone is the name.

@Rogers1977

2 жыл бұрын

This is true, but I think that particular Bourgeois is pre-Eastman collab.

@RhettShull

2 жыл бұрын

I am aware of the two companies working together, however my Slope D is before the Eastman era.

The top wood on the Bourgeois is georgeois! Sorry, couldn't resist. But seriously, it really is spectacular! Sounds good too!

Having a raspy bass heavy voice I actually preferred the sounds of the Eastman. I also had an Eastman Otto D’ambrosio guitar I wish I’d held on to. The feel of the Eastman guitars is good but very different. Another great video!

As the owner of an Eastman E10ss, from 2016, I can attest mine has turned into a wonderful sounding guitar. Fantastic harmonic bloom and balance. The guitar has an Adirondack Spruce top which needs time to break in, but also makes it a cannon that my fat, clubs cannot overdrive

It matters to me. I could justify buying a non U.S.A. product at this time, (given the choice) but need to know how the workers are treated regardless at least. Disturbing reports of conditions in American factories and completely unknown ones in foreign ones leave me at ends on what the right thing to do is. This is something all KZreadrs should pass on to their viewers.Give a damn.

@Tokai134

2 жыл бұрын

The US doesn't have federal maternity leave and affordable health care (both of which China has), but I'd still buy US products if it's an economically sound decision.

In the context of a mix literally no one is going to know which is which…

I've got an 09 Epi Sheraton II ( Samick Korea ) - that I A/B'd against a bunch of Gibson 335's at the time of buying and apart from minor hardware and electronics differences, the Epiphone was every bit the Guitar the Gibson was. There were also QC issues with many Gibson's that were not apparent on the Epi's ... I could not justify 2K for a name on a headstock and bought the Epiphone. I now own TWO Epiphone's - an MIC Firebird added - and absolutely love them both! P.S I am not a beginner player, having 35 years under my belt ... my advice, buy the GUITAR - NOT the brand or name on the headstock.

I bought an Eastman acoustic a few years ago. It was around $1,000. I was stunned at how much better it sounded than American made guitars that were several hundred dollars more from Taylor and Martin.

@MintStiles

2 жыл бұрын

The lower end Martin is meh. Taylor may have a few models that seem be exceptional (for a specific purpose) 512, 614 maybe a 814, but their strength is always playability, not the whinny mid range. Eastman that I had always tended to be more scoopy sounding.

@father1st894

2 жыл бұрын

@@MintStilesTaylor 614 is a guitar i never want to.put down. Playability and warm tone. At least the one i have..

Hey Rhett, just a friendly note: Don’t put “China” in your video titles. I get the idea for this video seems like it needs it, but it’s not helpful. I’ve seen this same thing on videos from large news organizations down to small theme park channels with 10k subs. It just draws Chinese bot accounts that are specifically there to stir up crap in the comments by attacking people that assert either a). that China’s government sucks and does bad things (like, ya know, the ongoing genocide), or b). that there are reasons not to buy things from China. It’s a really toxic problem that KZread seems to be aware of, but does little to nothing to stop. It always devolves into the same two or three arguments from the trolls, which can basically be summed up as “that’s fake news” or “oh, yeah? well the West isn’t perfect either/did horrible things over a century ago” (like that justification absolves guilt over actively rounding up and murdering innocent people because they’re an ethnic or religious minority). So yeah, damage seem to have been done here already on this video, but for future reference don’t even bother with these kind of things if you’re gonna mention Pooh Bear the potbellied dictator’s crap hole of a country. I know from the analytics it looks like a video that’s getting a lot of engagement, but it’s not helping you grow your audience. If anything, it limits the amount of regulars who want to engage because the conversation goes so toxic so fast. And this channel has been so good with the positive and decent comment community, it’s really sucky to see these a-holes show up and crap in it.

@markdouglas8073

2 жыл бұрын

China has a toxic ideology that is determined to put all competition out of business. The CCP plans to dominate the world, and they are willing to lie, steal, break the law, and ultimately kill in order to get there. I cannot deny their product quality has improved greatly. Let them build for markets elsewhere. But what you described is another reason to be wary of communist China.

Honestly, maybe it's the KZread compression, but the only tonal difference I'm detecting between the two is that the Eastman is a tad brighter and the Bourgeois has slightly more mids. Beyond that, I'm not hearing it. At this point, I'd focus on the playability - the feel of the neck and the string spacing.

I only own one slope shoulder and it’s a Gibson J50 and it’s beautiful guitar. I sold a Loar LH-250 recently incredible little guitar for finger picking and old blues stuff. I own a 2016 Blueridge BR-180A that when I bought seven years ago I felt it needed to open up and now in 2023 it has and it’s an amazing dreadnought. I’m currently on a slope shoulder hunt again. The Martin DSS-17 I’m going to check out today 2/18/2023 and I may check out the Eastman E10SS and the ET5SS models since the store I’m going to is an Eastman/ Martin dealer. I love my Gibson J50 so we will see how the Eastman’s and the Martin slopes compare. As for tone, I Feel that if you find a guitar, no matter the brand but it sounds right to you then you have your answer. So many offerings out their these days USA and offshore built. Lots of great guitars to choose from. (Edit, forgot to comment) As for the Bourgeois versus the Eastman, I vote for the Bourgeois but for the less money that Eastman is very nice! Thanks Rhett!

I enjoyed this comparison video as with headphones on I was able to hear the differences. The Eastman definitely had more power in the bass response which wasn't unpleasant but maybe lacked a little in the high end definition as a result. I could easily be seduced by the Eastman as the price is so friendly. I think on balance the Borgeois would be my favourite but the price might put me off. Great vid though and thanks for your in depth analysis.

@castleanthrax1833

2 жыл бұрын

I don't like the body shape, and I really don't like the headstock. I don't like the "classical" string guitar look of the headstock.

@genericstain

2 жыл бұрын

I think the sound profile could easily be tweaked by choosing vintage style acoustic strings (i.e. Martin’s Retro Acoustics), whose function is literally to reduce the boominess and add some brightness. When you use “vintage voiced” acoustic strings (which were the ONLY variety of steel acoustic strings once upon a time), you start to appreciate why the dreadnought guitars were engineered/produced in the first place!

@classicrkr2480

2 жыл бұрын

@@genericstain this is FANTASTIC information, I need to check out those strings!

@genericstain

2 жыл бұрын

@@classicrkr2480 it’s definitely worth a look, but I will say this: they feel TERRIBLE to my fingers for the first week or so, but they sound so good! And stay sounding good a lot longer than new age strings.

@classicrkr2480

Жыл бұрын

@@genericstain Okay, so this suggestion changed the acoustic game for me. Put them on my old Martin D-18 from my great grandfather (I believe it's a '59?) - THIS is the sound that I've been wanting from this guitar for years but could never figure it out. Thank you so much! I'm mostly an electric guy but I'll be playing this more now :)

There are a lot of high end guitar brands in china that provide custom shop level attention to detail and quality (or even better dare I say) for less than 1500$. Now that isn't a small amount but considering how much a Gibson or fender custom shop commissions go for these are a steal. Would love to see you play a really well made Chinese electric guitar.

@bolillo5013

2 жыл бұрын

Is Takamine a Chinese brand? I’ve heard that they’re pretty good.

Great video! The Eastman sounds great and, overtime will get even better. Acoustic comparisons are difficult as I have never heard two that sound the same, even the sam make and model. I have two EJ200s and they have completely different tones, even play differently. They are both with same strings, same set up.

A lot of my guitars are 🇺🇸 made but not all. Eastman’s is a privately owned enterprise located in China unlike the larger factories that are owned by their gov. Eastman’s are all handmade with excellent craftsmanship. The founder of Eastman attended Berkeley where he realized students needed affordable quality instruments. They initially made violin’s and cello’s. Their custom shop is located in Ca, USA. Eastman’s factory in China is like time warp to the 1950s and they have some of the best luthiers in China. Many of their executives are 🇬🇧 and 🇺🇸. Eastman uses 🇺🇸 made Seymour Duncan and Lollar pickup’s, one piece bodies and necks, long neck tenons, high quality woods, with name brand components and hardware. There are Chinese companies like Eastman and Shijie who both make great instruments but many look down on them simply because of where their made rather than the quality of their instruments. About 70% of us are watching Rhett's video on devices that were made by extremely under paid Chinese workers who are forced to work in horrible conditions. Not to mention these devices are produced is factories owned by China's gov. The Chinese gov does do many bad things that many disagree with but is it fair to blame their citizens. No person is perfect especially politicalcians. Every country has their issues big or small. It's just odd to me people are willing to buy their electric devices that are made in shady gov owned factories but not their quality instruments. It just doesn’t make much since to me. It should be about the quality of the instrument and how it plays. It shouldn't matter where it was made. My imported guitars get played just as much as my 🇺🇸 made guitars. Just saying think about it you'll buy a ipad but you won't play an Eastman.

@RADThird1

2 жыл бұрын

Finally. A thought-out response to this issue. Thank you!

The bourgeois is beautiful but the sound was somewhat similar. I agree with others here, I would not buy a guitar made in China for obvious reasons. All my guitars are American made with the exception of my Mexican made taylor gs mini.

@bigmikeyz0071

2 жыл бұрын

Companies like Eastman and Shijie are smaller and privately owned. They pay and treat their employees better so you really shouldn’t compare them to the larger mass produced factories owned by the gov of China. The founder of Eastman attended Berkeley and found that students needed affordable quality instruments. So he started Eastman with some of the best Luther’s in China. They started off making violins and cellos. Their guitars are all handmade with top notch craftsmanship. Eastman’s factory is China is like a time warp back to the 1950’s and their custom shop is located in California. Watch their namm videos all their executives are American. We all must buy what we want but there are a lot of misconceptions about Eastman and other companies.

The Borgeois sounds better but it isn't too far off. I like the look of the Eastman better, personally but I am sure there isn't a "bad" guitar anywhere in your studio. All three sounded like guitars I would enjoy playing very much!

I recently heard this country duo play live.. and one of the guys used an Eastman. His guitar sounded phenomenal. Worth looking into.

They both sound good but I hear a clarity in the higher end guitar that is unmistakable when you are finger picking. I'd even call the Eastman "muddy" in the middle tones. Of course it's all subjective but that's what I hear. If you were a strummer exclusively I'm not sure the extra money is worth it for the higher end.

For me, how easy a guitar is to play is really important, certainly as important as how it sounds. If it sounds good and is painful to play, I'd pass it up, as well as if it is easy to play but doesn't sound good, I'd pass that one up too.

@GRJ-uz7kf

Жыл бұрын

Yes. As an old armchair picker with smallish hands, playability is number one for me. Then tonal subtlety.

The Borgeois is warmer and breaths vs the harder wood sound of the Eastman which sounds like it’s stuck in a fixed frequency range with a little bit more high end and tighter lows. I seriously considered an Eastman but in the end paid for the Gibson counterpart for the superior fit and finish. I’m still considering an Eastman for my next solid or semi to be fair. Good video… Thanks.

@BRAG450

2 жыл бұрын

I felt the same, weird to see some others say the Eastman was bassier. To me all cheaper acoustics have too much treble and are too bright and chimey. Bourgeois was definitely warmer to my ear and more balanced.

A year ago I had the chance to try out a range of Eastman dreadnoughts, prices from 600 to 2000 Euros. Every 200 Euro jump in price was audible. I ended up buying a E 20D TC, (1999 Euros) of which they had two in stock. Both were very good but one was better than the other.Even at very subtle playing, incredible sustain. I´d recommend trying out guitars in that price range live. No two are the same, even if they have the same specs from the same brand. Turned out, on closer inspection at home, my guitar of choice had a laquer blemish at the heel...I returned to the shop with it and they made it invisible and after consultation with Eastman Holland, gave me back 10% of purchase price. Half a year later I bought (online) an Eastman AC 330, 12 string Jumbo. Does everything I want. After a set up, plays smooth as silk even with a 012 set on it. Around 1100 Euros, unbeatable for that price. As for choosing between Bourgeois or Eastman: I´d have to play them. That shop also had a used Larrivee dreadnought , and a Maton, for the same price, and a couple of Dowinas. Could not touch the Eastman.

I went looking for my dream guitar. We went to several shops to look. That day I played Bougeois, Gibson custom Southern Jumbos, and Martin HD-28's. I was discouraged as nothing wow'd me. My friend was with me and he said "Man, you have to play this" I walked out with an Eastman E10ss. Since then I have played Eastman's that I don't like at other shops. But most of them are amazing and some will be better than anything else on the shelf. Don't buy them online if you can help it. Go to a shop and find a Gem. There is a lot of passion with both makers. Some day I hope I find the right Bougeois as well. Love Dana and his work. Just didn't find the right one yet. Eastman is no Joke and I love most guitars I pickup from them.

Lotta people misunderstanding this video and making comments thinking they have some profound point to make. Lol

If it sounds good. Who cares where it's made!!

@nuthinbutlove

2 жыл бұрын

Eastman actually makes some really great instruments. Pro musicians play them. But I must say that Borgeois sounds great.

@robertfinch6602

2 жыл бұрын

no grunt grunt grunt..tbh

@robertfinch6602

2 жыл бұрын

Thats like saying you would eat a sandwich from somebody that didn't wash there hands! 🧐😂

@nuthinbutlove

2 жыл бұрын

@@robertfinch6602 being an extreme germaphobe I strongly disagree 😂🤣

@jackaro2

2 жыл бұрын

Amen

Casual observance: The Bourgeois has a bit of a funky upper midrange to it. Neither good nor bad...just a bit different. A midrange more associated with OOO or OO.

I just bought an Eastman "entry level" mandolin and I am much impressed. For an entry level, this mandolin is a bit pricey, but it is hand carved and has a solid top, back, and sides. And there is actually flame in the back and neck. It also has a ebony fret board, a bone nutt,. The binding is well done. You can't feel where the binding meets the back or sides. The finish is satin and the tuners could be better. I've got some Grover 409s to put on it, but the setup is so nice, I'm putting off replacing the tuners. And they really aren't that bad. If you would have told me I would buy a Chinese made instrument I would have said hell no. But Eastmans are nice. And I'd bet some of their more expensive instruments are very nice. Oh, did I say, the instrument sounds great.

Both sound great. I do have a slight preference to the Eastman based on what my ears are hearing and personal taste... Once you get into all solid woods, Nitro finishes (which Eastman uses) quality hardware, etc.. it really becomes about taste... I think the China vs USA built topic makes for a great KZread title (congrats we're all here), but of course build quality comes down to what companies are willing to put into the product. When a big builder like Gibson or Fender choose to build overseas they have incentive to distinguish their USA product from foreign built and to hold back a bit on quality, intentionally, to keep price lower on their import line or import models. In the case of Eastman, they are 100% Asian built so this is not a factor.

The voicing / bracing on the bougeois is far superior. what an impressive guitar. Eastman … im thinking the price point is probably overpriced… $999 might make me move on it.

@alex_lgrd

Жыл бұрын

I’d go with a Taylor 114 instead

@angelg8445

Жыл бұрын

@@alex_lgrd Taylor 114 is laminate and not all solid like the Eastman

@santacruzman

Жыл бұрын

What do you mean by "far superior"? You can't even see the braces themselves in order to compare them visually and from that infer their contribution to the tone of the instrument. Such hyperboli. Among competent craftspeople, time spent at the craft is what best determines level of expertice. The master luthiers in the Eastman factory "far surpass" the American boutique builders in terms of number of instruments built and time at the table. But sure, being Americans, we want to project an aura of superiority on something that comes from "one of us." The three Eastmans I've owned (post two excellent SCGC's: Tony Rice sig, and .000) were purchased because they were first and foremost outstanding sounding instruments. Next, was the actual tone wood used, the easthetic, and level of construction. The last criteria was price. If you can't see past a brand, have a seasoned musician (one whose sensibilities you respect) pick out an instrument for you.

@chillpillology

Жыл бұрын

@@santacruzman ok sir i hear a tremendous difference. i can see you have a strong opinion also. mine is different than yours. i could not care less about brands. but i do not hear a standout tone here.

The Eastman has a fuller bottom (and a bit less high end) - while that sounds pleasing when playing, it's not always desirable for recording, as things can get boomy real quick and you have to use corrective EQ. The Bourgeois sounds like it's been "pre-EQ'd" for recording - not boom in the low end and very sweet and present high end. I've owned an Eastman ES-330-style electric - they are definitely good quality for the money, but I just prefer higher-end, USA-built guitars, so I sold it.

Curious if higher end guitar wood develop that aged sound better? What would it be like to compare the two guitars 30 ears down the road?

Both guitars sound great. I have two Eastmans which I’ve A/B’d against their Gibson counter parts. It would be interesting to hear a brand new high end acoustic against the Eastmans. A 10+ year old guitar will sound more balanced just from age. Cool video.

No matter how good the Chinese instruments are, they just don’t hold there value. It is true in the violin market (which I am most familiar with), and appears to be true in the guitar market as well.

@melodica5407

2 жыл бұрын

I'd better spend my money on a gold bar if i want something that holds value

@lowellcalavera6045

2 жыл бұрын

If you buy a guitar with selling it in mind, you're just a collector. A guitar player seeks tone, not the opinion of others.

@tonyinhbolero4815

2 жыл бұрын

@@melodica5407 akkakakak he yeah

@tonyinhbolero4815

2 жыл бұрын

@@lowellcalavera6045 true

@VolReed

Жыл бұрын

@@lowellcalavera6045 so you’d rather your grandfather leave you a cheap chinese vs an American classic 👌

I fell in love with an Eastman a few years ago. I was lucky enough to be able to play 10 different models and I liked the grand auditorium body much better than the dreadnaught models. The Rosewood back and sides are a little less boomy on the AC422CE, but still an open sounding bottom end. I bought the AC222CE that is Ovenkol back and sides with a Spruce top for a mid-focused sound. I was very close to buying the Rosewood version.

I have an Eastman E10 D. I love it. I find comparable to a Martin D-18. Excellent craftsmanship. Try your Eastman with some Elixer Polywebs. You’ll love it. Let’s hear the Eastman after you have it set up. Maybe have it plexed?

Eastman actually makes some great instruments. Pro players use them. But I must say that Borgeois sounds great. I think with a set up the balance would slightly improve with the Eastman.

I'm very glad that I supported the American economy by buying a Martin and several US Fenders (MIM as well). In the guitar world we thankfully still have the choice of who to support and I'm not willing to support the Chinese dictatorship by buying Eastman guitars, no matter how well these were made or how "good" their prices are. The world is way too dependant on China already, buying high end guitars from there only makes it worse. And if it means that I have to save up a little longer to be able to afford guitars made in USA, then so be it, I will gladly wait.

Being old (65) i recall seeing Teisco tulip electrics for like $39.00 at Thrifty Drugs Store in the late '60s. Victorias were lust worthy, too.MIJ. They were pretty terrible but my first electric was an Audition off set with gold foils in '73. I loved it. A few years later, IBZ shows up. I have a lawsuit RR Sr thank goodness, It rules! Bunch of stuff but the latest, an Inspired By Gibson Epiphone Firebird, 65 bd present to me. MIC. Hard to find and the guitar needed work (stopped working). Just missed the return time line. It wasn't the guitars fault,,,,It wasn't packed worth a damn. Fixed and i love it !! This was built right, sandwich neck thru and all. How they do this for $650, i don't know. (cheap labor ;) man, i was the caretaker of a CR '76 Gibson in the mid 80s while a friend recovered from a serious car accident (almost killed him). I like mine more.

Difference is 1 is made by free folks. And the other by comparison is almost free.. folks.