micro atx is underrated. I always see people either building huge rigs in huge cases or the smallest thing possible mATX is just right imo

@antonuis2547

Ай бұрын

With no jacky tunning style. very discret its rare and don't add useless fan that you gone change.

I'm really impressed with the space in this seemingly smaller case.

Excellent production value as always!!

This channel is just such a good channel for pc builders who prefer the simple and minimalist design over having a rig filled with rgb.

Bomb video, hope your channel grows exponentially bigger!

Great vid. I like how you are featuring more affordable and accessible builds.

@theforbiddentoystore1203

6 ай бұрын

affordable and 4090 dont fit in the same sentence

@canvargun

6 ай бұрын

Honestly, I can't remember in what state of mind I commented like that. I just wanted to post a comment for the guy. @@theforbiddentoystore1203

@jonathanbarragan6256

5 ай бұрын

​@@theforbiddentoystore1203for real lmao

The filming quality here is top notch. Nice clean build bro!

This is a great mATX build, exactly what I am looking for having compared different parts on pc builder. Great explanation of the different parts fitting together and look forward to more content.

I love your videos, visually they are very pleasing and you explain everything in a clear way... clear enough for me to pretend I understand 😅

Wow I decided to build a pc myself a week ago, after seeing another video on a similar build. Then I found this as I am about to get all the parts, and see that all the changes I’ve made to that build is similar to the build of yours. Stunning video as well!

Good video, good build and I have to admit a pretty sweet case. Thanks for sharing.

Dude, you rock, cheers from Argentina! Keep it up!

Great video, love the build!

This channel is criminally underrated, your content is great man! Keep it up and wish you to get the attention you deserve

@drakata27

9 ай бұрын

but you are losing on fps if you dont have rgb

@arfa1599

8 ай бұрын

​@@drakata27 bruh that myth is fake

@drakata27

8 ай бұрын

@@arfa1599 hatem ben arfa🔥💯

@catto8331

8 ай бұрын

@@arfa1599nah, it’s real, trust me

@ClavinZKL

8 ай бұрын

subbed just cause of ur comment, didint even watch the video yet.

great video man. you're gonna be successful on youtube for sure. i might actually copy your build eventually too, its so clean.

*This one video got me on the fence of downsizing to mATX vs ITX*

@DJIsher1

6 ай бұрын

This video got me to build my first PC! Although I pretty much copied the build here, I'm super satisfied with mine.

@IronOre33

4 ай бұрын

But itx is smaller

@DanielRM7717

25 күн бұрын

Cooler Master NR200 is a great option for a first ITX build.

@Artjom-wd1nk

23 күн бұрын

@@DanielRM7717 they are not produced, 200p v2 only

@yummypeach455

12 күн бұрын

mATX is way better than ITX because there are room of upgradability, you get 4 ram slot, more PCIe, more M.2, and a lot for just a little bigger size.

Woah! I have never visited this channel. This is some premo production! That build is amazing! Subscribed!

I had the v1 version of this case for a long time. It worked for water cooling a GPU while air cooling a CPU. It definitely works for a small build but was very difficult to work in.

Awesome as always Devyn.

Such a good underrated channel. Keep it up 👍

Nice build. You just informed me for the existence of the V2 of this case.

Small powerhouse! I love this.

I would also recommend for anyone that is trying to step up the looks even more to add some custom GPU cables, will clean up the look of your build a ton!

@mrbp3351

8 ай бұрын

lol

nice. will be looking into this case when it becomes available in my neck of the woods.

Thanks for representing the people who have Micro atx man keep it up

Very awesome. I'm glad to see that the B760's can handle these beasts of cpu's in such a small build! Totally gonna upgrade my cpu later this year my 11700f is starting to bottleneck my 3080 in some games including Starfield. :(

Outstanding work 👍🏾💯

I have to thank you for this video and your channel. I pretty much copied the build you have here and am super satisfied with it. It's my first PC build ever after having bought various laptops and mini pc's to game on. But none of those actually matched the performance I wanted out of a gaming machine, so I decided to go all in. I feel great about the build because I more than likely won't have to worry about upgrades for a good while. I was thinking of switching CPU platforms to an AMD 7800X3D if I can find a buyer for the CPU/Mobo Combo. But if not, I still have a killer rig and it was a great experience following the video while building.

you motivated me to build again man, thank you

@iikatinggangsengii2471

3 ай бұрын

i use these devices alot so small difference/conveniences are easily noticeable

I built the same desktop. This has been a joy to build in this case. My specs are: Ryzen 7600, 32GB 5600, Thermalright Phantom Spirit Cooler, 2TB Samsung 990Pro, TUF 7800XT OC, RM750e and for cooling I threw in 3x Antec Storm T3 fans. An absolute monstrosity for 1440p.

@christopherdelgadillo5838

2 ай бұрын

What are temps while gaming

great build

I love Micro ATX, the ideal size.

Gread production quality

Great video! I love this case... Is it possible to fit an ATX motherboard?

Great video. Quality is excellent. Is this a case that I could throw in my carryon for travel or should I do it instead.

I'm so glad i'm actually able to find pc builds without rgb puke everywhere. thank you

Beautiful,. Compact, but an absolute beast.

2:07 I can quite comfortably get around 5.7ghz with the 13600K so i think it is worth overclocking. Even if you're not going to OC you can still undervolt a bit to lower the tdp

Your edits and aesthetic is getting better and better, love it, you should do a review of that beautiful monitor!

i would love how the thermals for it was, especially now some time has gone by

I’m surprised that Cooler masters More Budgeted case can fit a 4090 that’s Just Wild man :00

Clean build ! Optimum 2 😉 Can you tell me what do you use for this blue background 0:58 ? Just a big piece of paper ? Thanks !

I hope this revised version comes to India as well.

Interesting to hear you say it has good airflow when every review I've seen describes this case as an oven.

Replacing LGA1700 stock contact frame with aftermarket one would be a nice upgrade for this build

Awesome video, planning on using this case but with an AMD build. Is the intake okay for the PSU? It seems quite clsoe to the floor. Also does spreading the thermal paste like that not lead to it overspilling?

Great video.

I really simple builds like this. One recommendation i have is that instead of 32 gig you could get a 48 gb kit from corsair

You are one of the few PC builders who actually install high tier fans (though anything similar or better than the Arctic P12/P14 is already good for this case) to address the Q300L's 'hotbox' issue. Most reviews for the Q300L rely on the pathetic single stock fan that came with the case, with shockingly predictable results.

Great video! Just sad they dont fix airflow in the Q300L v2! Coolermaster, YOU HAD ONE JOB!

@juliandomsch2794

9 ай бұрын

Just a question, shoudnt the HP plug for the graphic card had at least 3 PCIe conection in the PS side for a 4090?

How do you get all these components ? Brands send you this stuff or you buy it for videos ? Thanks !

amazing i like this build

I found this channel first time, from video making slim Desktop PC to match with PS5 design 😅

Great video.. Which keyboard is that plz

Would loved to have seen it with an AIO at the front, great video though!

hey man you should do a more in-depth breakdown of building this pc i think that would be very enjoyable

if you got an modular psu and case like that i would say - connect power connectors to the motherboard BEFORE you attach motherboard to the case then you can just move cables first via the holes and then attach the board :) no need of then using your raccon fingers to attach connector in tight space like that :D

This is great

Ha I just got this case a week ago, funny to see it in a video. I crammed three 140mm fans in there, two in front and one in the bottom. And two 120mm fans on top and another 120 in the exhaust. Also have two 120mm on the cpu cooler. And finally, crammed in a 6950xt as well as an HDD in that side panel with the cables. Cool case, I have it laying flat on its side on my desk.

hi i havve deepcool assassin 4, do you think it will fit into this case? thx. love your build

I would encourage folks to just swing for 2TB+ if they can afford it (or save up if at all possible). Especially in a micro-atx build where getting to components can be a bit of a pain and "add-ins" are quite difficult if not impossible.. Games these days are 100GB+, so you will be able to fill a 1TB drive super quick.

@williamelijah27

9 ай бұрын

What about an external hd? Would that be a good solution?

@dreadlord9257

9 ай бұрын

@@williamelijah27 You certainly could do that. It is just one more thing hanging off of your micro-atx pc though. Also, USB4/TB4/TB5 traditionally has not kept up with PCIe/NVMe. So only a matter of time before your external ssd/enclosure begins to feel the speed pressure.

@Luke357

8 ай бұрын

It's not hard to upgrade mATX. My last build had 5 drives in it 3 of which were SATA.

he just dont miss

@lbanikr1214

9 ай бұрын

He knows what he’s doing

Companies need to bring back Micro ATX. As far as I can remember, a lot of motherboards that came in prebuilts and what not are Micro ATX motherboards incased in either mATX cases or Mid Tower cases. With todays tech and everything being smaller (besides ITX) mATX should replace ATX just because it would save them some cost and fit all the bells and wistles appropiately.

AIO's are cool and all but air cooled is king and i feel like it looks more professional. Excellent video quality I enjoy your content.

love it

Really well put together video. The 4090 is really pricey. Would the system perform well at 1440p using the 4070?

@ikram2512

Ай бұрын

Yes

I returned mine in time after seeing how bad is the airflow with these small holes. DeepCool CH370 offer's a better airflow and has a similar size.

For the memory, it's 5600 megatransfers, not megahertz. The actual clock speeds are half that.

Great video, really interested in this new version of Q300L How does the case perform in terms of noise level?

@orangechannel4862

9 ай бұрын

I have this case. Complete shit. Fans cannot blow it either from above or from the front, since the cells in the grid are too small and located far from each other. In fact, it does not blow at all, in any way.

Was thinking of getting the cooj z18 but considering the fact that this is 1/5th of the price im getting this case

I tried DDR4 and 5 with the 13600kf, most games you won't notice the difference, one game saw DDR5 get a clear win and a handful of games favoured DDR4. DDR4 has lower latency than DDR5 although it does perform better with some computing tasks such as 7zip. Should be using a replacement CPU mounting solution, especially in such a small case, it will lower CPU temps by 10+°C. No point buying a "k" if you don't overclock it, most 13600k's will do 5.5GHz with lowered voltage and massive temperature drops, it's crazy not to, again especially in a small case. Love that little case, and it's basically a solid build, looks good, solid performance, solid video.

@sparklingion

9 ай бұрын

What speeds did your ddr5 have compared to ddr4? I see ddr4 3600cl16-18-4000cl16-18(OC) demolishing ddr5 under 6200cl32 but as soon as ddr5 passes that in speeds is when it finally starts winning or being even, next gen should bring out higher 1:1 ddr5 speeds and we will finally see it surpassing ddr4 in performance on average and overall! (Hopefully)

@Helixian3

3 ай бұрын

What replacement CPU mount would you recommend?

That case though 🔥. Wondering if sapphire nitro 7900xtx will fit on that case...

@fireblossom564

7 ай бұрын

It will

how is airflow? are you able to show CPU and GPU temerature at idlea and under load during gameplay?

I am considering the AMD version of this build.

I have one question, what is the light bar that is placed behind you in the background? I have seen so many KZreadrs using something like this.

I prefer the DeepCool CH370.

Kinda big for an mATX case. Then again it's cheaper than many mATX case on the market so it's not bad. Plus, it's not putting the power supply at front. I do wish it had a bit more airflow to it then just holes. Otherwise great inexpensive case.

Can you do a budget build in this pc case

is there any space on the mobo to use a pcie slot, with the gpu in?

What do you do will all of your pc builds after each upload?

I would have chosen a z690 or z790 chipset motherboard to unleash the full potencial of the cpu, as well as using at least a 240mm radiator to really disipate it's heat

what are the temps with both side panels on?

is the airflow in this case good? It doesn't look like it... it looks like the front panel is mostly solid.

Hey Dev, can this case be inverted?

I wish they have a tinted glass option for this.

What do you do to those build after you use it?

Having used the Q300l v1 I really liked that case very simple and honestly smaller then some of the mITX. How are the thermals in this v2

love matx build because price is better than itx. i love mine cm nr400 =). nice vid

im looking for a matx case with a 140 rear fan and 2x140 or 280rad top and 2x140 or 280rad front... only could find the kolink mesh.. are there any more? also u forgot to mention when using a pcie m2 nvme drive ur gpu pcie lanes of the gpu will shrink...

How much is this brother? This is really good! Can you make a deeplearning rig and try to fit it in as small a case as possible?

do you build comps for people?

I got the 7800x3d and tho 4090 in a Velka 7 (6L)

Hello, what is the small window in the top of the screen which is showing the FPS, CPU Load, and more. You see it on minute 1:29 for example. I'm searching for so long for these software and could never figure out which one it is. Glad to here your feedback, many thanks and have a great day.

@ikram2512

Ай бұрын

MSI afterburner

Looks cute❤❤

What was the mouse and keyboard on the thumbnail?

Есть такой корпус первой интерпретации, первое что я бы сделал сменил боковую панель на перфорированную, подумал как поставить водяное охлаждение 120 хотя бы на две секции, сузил пространство где hdd стоит тем самым сделал бы больше пространства в корпусе. Как корпус для Matx он мне больше всех нравится ничего лишнего просто ящик с перфорацией. Я больше предпочитаю теперь sff корпуса.

4:15 is the mobo bent?

is it safe if i will use it for 3d rendering, i am concern with the temperature especially on the gpu.

Would I be able to case swap from a omen 30L?

Why do you chose CPU that can be overclock but not for the motherboard? Is there any reason for that?