I love these engines so plain and simple

Man I gotta tell ya, I learn something new every time I watch this video, it helps me do better on my videos and it helps me on my overhauls too. Great job, can't thank you enough!

@anotherdayanotherdollar4039

3 жыл бұрын

Do I loosen only one bearing pass by pass then move onto the next

I wish I had a torque wrench that looked like a samurai sword.

Great video, I rebuild these engines all the time, I love it and they are very high quality engines! thanks for posting

@Primer9

7 жыл бұрын

do you actually come across and work on oldschool toyota motors?

@pandukawb

6 жыл бұрын

I came to this from your video!

@godyladera1872

6 жыл бұрын

Clint Hightower iiii

@abdoukadriabdouide5336

6 жыл бұрын

Clint Hightower validated what you was saying thanks

@cliffordgmassoudy9711

6 жыл бұрын

Clint Hightower powet. Power stering.

26:39 the fellow on the left is named Junichiro Honda. He ended up becoming some vp of service or something similar. My grandfather was a manufacturing engineer and worked directly with him in the late 90s. I had dinner with the 2 of them when I was 11 or 12.

@alansmilealot

3 жыл бұрын

Where were you living at that time and where are you now?

@hoobaguy4311

3 жыл бұрын

@@alansmilealot I was in the United states then and I'm still here. At that time I lived in Virginia but my grandfather worked in Japan. A bunch of them were going on a business tour of the east coast looking to set up some corporate entity there in addition to TMS in California. I was visiting my father (parents were divorced) in new York. Dad got a call from the old man and said to come to the city (about a 45 minute drive) and have dinner and meet business friends. I was excited because I had a hard on for all the Toyota sports cars and thought I might be able to see one. I was a stupid kid and had no idea about anything lol. We met them at Balthazar's. I think there was 5 or 6 of them including Junichiro and my grandfather. I think my grandfather was the only one who spoke English because he has to translate everything. It was interesting but boring for me. Anyway, that's it. They never opened the east coast office as far as I know.

@alansmilealot

3 жыл бұрын

@@hoobaguy4311 such a great experience to have. I see u have a mr2 in your picture, do you have that one?

@hoobaguy4311

3 жыл бұрын

@@alansmilealot Yes I have that. It's a 1986 model with some TRD parts from the dealership. I'm the second owner. My grandfather was the first. I also have a Camry and a rav4 that my wife drives. I guess we're pretty brand loyal. I also had a mark 3 supra a few years back but I sold it to make room.

@GaryDelgado

3 жыл бұрын

@@hoobaguy4311 That mr2 is the kind of car you keep forever. Do you call it "Grandpa's car"? That's the nickname I would give it :) Cheers

I will use this video to rebuild in engine so I can avoid some mistakes this is what I have been looking for a long time thanks good learning experience video

Came for the info, stayed for the music

2:38 When you misspell 'before' but it'll cost too much to change the powerpoint slide in the 90s to bother correcting

@ericohman

Ай бұрын

Today it costs barely nothing to correct mistakes in digital newspaper headlines etc, still no one bother to correct 🤣

Excellent video, love the detail of the oil clearance checks, good job and thank you. You covered some of the more technical details that I skip in my videos. Well Done!

@eristanyag8913

6 жыл бұрын

2e cylinder head asembly

Is it bad I could watch these Toyota videos all day?

Awesome video thank you!

This video is spot on! ♥️

Good luck getting this level of attention to detail from your "independent" shop

@cbh148

4 жыл бұрын

Good luck getting this level of attention from your OEM dealership.

This video is great. I have built the 4A GE DOHC engine. I wish I had seen this long ago...

Dam where did you find this rare vintage video. Must have been on VHS. Lol. Nice video. Now it will be preserved here on you tube for life. Put some more up. I know you probably have a lot.

I like it 🎉

Love this anime! Did they ever make a sequel?

cool, thanks 4 sharing.

Excelente video

great video

I wonder if Toyota made an overhaul video for the 22RE or 2JZ, or any videos for those engines in particular. I get the impression that they just did this overhaul video for engines in general, with the 4AF selected as an example due to its simplicity. I have a '94 Xtracab pickup DLX (22RE, 4x4, 5 speed W56) and really enjoy OEM publications/media related to it.

wooow,those tools. sijui kama zinapatikana Africa.only at Toyota service centres

I luv this vedio plss one by one of parts to assimble of part plss tnx

I love my 4e

So much info ...love it

When Nintendo lets Toyota borrow Mario to be the host of their instructional videos

nice bro👍👍👍

Great explanation thanks alot

Very good

Хорошая машина Carolla E100. Даже спустя 26 лет лучше автоваза. И двгателя A и E серии отличные.

@olexvol9249

9 ай бұрын

Так и есть. Поддержу ваш пост.

I have the same motor im going to rebulid thank you so much for this

@alansmilealot

3 жыл бұрын

Hey did you rebuild your yet? I know mines could use it down the line if not now

@fresnoslaps-oy9wn

3 жыл бұрын

Yea i did i went all out and repainted it.if u have tiktok check it out its my bass ride but some videos i show the motor bassrolla559

@alansmilealot

3 жыл бұрын

@@fresnoslaps-oy9wn I checked it out. I need to do my sound system too, I have all the parts. Time has been really catching me and the weather

Good over haual ring piston setting is best in engine no back compretion

These engine durable it can run for a test of time

Toyota the best car ever

@hananbajji5693

6 жыл бұрын

Ihab Gerges ز

@hananbajji5693

6 жыл бұрын

دمممنزوتتتاا

Hi, I just need to know what is the correct NM when tightening 10mm cylinder head bolts on Toyota Corolla 1.6GL 16V 4AF engine(1991 model) using a torque wrench?

My car also has those engines to

Do a 4AGE yeah!

@hoobaguy4311

4 жыл бұрын

There bottom end is the same. There heads are a little different because the head on the ag was made by Yamaha. Same process though.

Tell me, why there are 2 pick up coil connected on series to detect crankshaft in the ignition distributor...?

Welcome in modern world of TOYOTA!

@gunnarkarlhalldorsson92

Жыл бұрын

You icelandic ?

@datadavis

Жыл бұрын

@@gunnarkarlhalldorsson92 no not even remotely. i know an icelandic guy, does that count?

@gunnarkarlhalldorsson92

Жыл бұрын

No. But your name look very icelandic.

@datadavis

Жыл бұрын

@@gunnarkarlhalldorsson92 ah, well i guess some of us went there to colonize, although most of my ancestors became Normands

+Rudolf carl i hope you can help. When I'm cruising at say 50km (30miles) or really any speed, when i lift my foot off the gas suddenly or even slowly it causes the motor to jerk once after like half a second and when foot goes back on it jerks but pretty much straight away when foot goes back on gas?? cheers

@kiyoponnn

5 жыл бұрын

check the clutch and transmission

do you have video for toyota 2e engne?

Are the 4af and 4afe heads the same also if the intake manifold bolt holes are the same i want to put a 4afe first gen head to a 4af engine block i want to convert my 88 corolla carb to efi any help would be appreciated

@gundism

5 жыл бұрын

let me know how that goes I'm actually looking at doing the exact opposite to one of those motors to make it into a for a f because I don't want to go through the pain of changing it from carburetion to fuel injection

planning to overhaul my other car even though its still working fine just to clean every part and replace worn gaskets. guess not good idea

Hilux 2.8 (3L) ???

Hii video unajifunza ufundi bila kwenda darasani love from🇹🇿🇹🇿

What year engine is this for? I ask because the 4A-FE manual never mentions the torque to yield method . It just says to torque the head-bolts to 610 kg-cm.

@user-jp8dq5cg1n

7 ай бұрын

1988

What type of engine oil they used after the overhaul?

@joelaparicio7046

2 жыл бұрын

the same as the manufacturer in the manual recommends

does general overhauling will increase engine power and performance sir?? like replacing the crankshaft/camshaft/cylinder head with new ones except the block.

@alansmilealot

6 жыл бұрын

Artek Balbawang overhauling may restore lost power if the engine was worn enough.

Can someone please explain to me the use and purpose of the service bolt on the camshaft

@dougohboy5190

4 жыл бұрын

its a sprung dual gear the bolt holds the outer gear in place for removal, it stops cam back lash...

Classic af

kg-m1#kg-cm100.ครับ

its corolla machine!

6:27 timing belt

Thanks , I wonder why you stop uploading videos, I hope you will be back

Its look like really old video

where is the 4k video? 😂

How to set tapat?

Is this engine 4af Is Interference?

Murid pak ismoyo:)

What size of filer gaje?

610kg_cmเท่ากับกี่นิวตันเมตรใครช่วยหน่อย

@didntpassananan6569

7 жыл бұрын

เสน่ห์ จิตรจอง อย่างงี้ต้องใช้ ตารางแปลงหน่วย ไม่ก็ผมเคยเหนโปรแกรมแปลงหน่วย

anyone knows where I can get repair manuals this old

@timothykeith1367

Жыл бұрын

Online download?

@jmmalimba

8 ай бұрын

Haynes

i want learning macanical

How many engines are in a car? lol

What are Sims

si no fuera mucho pedir pasarlo en español

Water coins dameg

What the heck you have done If your 4afe needs overhaul... Driven 1 million on it?

y am i watching this

@Arz2003

7 жыл бұрын

scampers because once in your life you owned a toyota

Anyone Donate me a 5AFE engine?

Looks 1993. Eurodance music videos were like that. In reality, nobody cares for your Toyota engine. As soon as your mudguards get rusted through, you are expected to buy another car. It makes sense only so far, as you don´t fix everything. Fixing something is not economical, but fixing everything makes sense. Even so, the horrendous draconian Toyota dealerships will not touch your money, you see, they want you to maintain the value of the car, or buy a new car, which will not be electric. This video was meant for 1993 customers, who give Toyota money for engine maintenance. I did an engine overhaul of the E2 Engine at a Private firm, 1600 €.

What size of filer gaje?