Outfitting Tips My Stout 2 "Set Up" Thanks for Watching! #pyranhascorch #whitewaterkayaking #kayakreviews
Жүктеу.....
Пікірлер: 57
@southeastAF2 жыл бұрын
This was actually really helpful. I like the foam under the end of the seat and bulkhead additions.
@WadeHarrison
2 жыл бұрын
Gald I could help
@PALSRide2 жыл бұрын
Always learning something from you wade thanks for the tips
@WadeHarrison
2 жыл бұрын
Just a few ways to get little more control
@guth38912 жыл бұрын
Sweet video !! Thanks
@WadeHarrison
2 жыл бұрын
Your Welcome
@pop47254 ай бұрын
Just what I needed to know … thanks Wade
@WadeHarrison
4 ай бұрын
👊🏻😎
@MikeHarvey19 Жыл бұрын
Great vid thanks
@WadeHarrison
Жыл бұрын
Thanks
@briancastillo32492 жыл бұрын
Wade - Brilliant outfitting tips ~ (definitely will utilize for Scorch X outfitting) - curious about the foot block - I've seen others drill holes (make the main block like swiss cheese) and then sandwich that w/ thinner foam to absorb hits. Have you ever messed with that strategy? Also on the seat shims... You do that in lieu of the bigger shims that come with the boat, yeah? (I'm looking to improve connectivity in the X) - All the Mahalos for sharing your experiences and insights - saves a tonne of trial and error - SALUD!
@WadeHarrison
2 жыл бұрын
The seat shims were some dagger hip pad foam that in a small wedge I just glued it in there. And as far as the bulkhead I have seen paddlers putting holes in foam to add extra impact but really I think of foam out the bulkhead it’s fine I do wish Pyranha would give you a thicker block to work with.
@michaelmitchell787922 күн бұрын
awesome tutorial! Question: best way to attach foam shims to an existing foot block? glue? double sided tape? two sided velcro?
@WadeHarrison
22 күн бұрын
Spray 90 glue it’s the best amzn.to/3LlG1ZK
@Brainbop2 жыл бұрын
Hey Wade - great content as ever! I demoed the Ripper 2 this weekend - loved how the boat paddled, but felt like the back band and hip pads sat very low on my back and hips, and not very secure almost like i'd slip out the boat on capsize. Is this kinda what the Scorch felt like before you made your adjustments, and does it feel more secure now if so?
@WadeHarrison
2 жыл бұрын
I made a video on what I did to mine with the backband upgrade and it helped the hip pads also
@crisbra2 жыл бұрын
Thank you for the ratchet trick!!
@WadeHarrison
2 жыл бұрын
Glad I could help
@jackberriman11312 жыл бұрын
Love the tips! would you consider doing this sort of video for other styles of outfitting like the contour ergo/LL Whiteout?
@WadeHarrison
2 жыл бұрын
I did start on a contr video when got my phantom but never finished it guess could throw something together
@jackberriman1131
2 жыл бұрын
@@WadeHarrison that would be sick!
@WadeHarrison
2 жыл бұрын
@@jackberriman1131 yeah I will see what I have on it
@FeWolf2 жыл бұрын
Really liking those leg lifters!
@WadeHarrison
2 жыл бұрын
Yeah I have done that in a few other boats and works well..
@FeWolf
2 жыл бұрын
@@WadeHarrison do vid about it, hell sell me pair
@MTmixer84
2 жыл бұрын
I have made my own for my boat out of layers of stock foam it came with . Nothing aggressive but it helps. I actually would like to add more to mine but it makes the seat slightly uncomfortable. I'm tall and skinny so I have fitment issues every where lol.
@WadeHarrison
2 жыл бұрын
@@MTmixer84 yeah I try to customize about every kayak I paddle some way
@wyattthrasher74602 жыл бұрын
Hey, I would love to see a video that provides a template or measurements for the heel block. I tried to make one for the ripper, and it ended up just being a massive waste of mini cell foam lol.
@WadeHarrison
2 жыл бұрын
I will try to cover it in another video
@followingrj
Жыл бұрын
@@WadeHarrison I agree with Wyatt, a video on this would be super beneficial. Where do you pick up foam like that or is it just older foot block foam that you used by cutting it to shape to fit there?
@AndrewMoizer
Жыл бұрын
@@WadeHarrison I'd love to see more detail on this too. Just got a Scorch X yesterday, so outfitting it today. Also would appreciate more info on what float bags you like, especially for the X where's there's more boat to fill up. Thanks again for all your content.
@michaelmitchell78794 күн бұрын
Question: on the water bottle and throw bag. you just cut a through hole on your front foam block to attach a bungee string/rope? also,what buckle is that that holds the throw bag?
@WadeHarrison
4 күн бұрын
No this all comes installed on this model
@darksidecarnival538510 ай бұрын
Hey Wade do u mind me asking how tall u are? I run my seat in the middle holes, I have the Thigh Hookers installed and I notice ur mounting ur aluminum bracket 3 open holes from the front. I have the OEM foot pad on the OEM foot rest pod. I'm in a 2021 Machno. When I see how much ur knees are bent and the angle of ur feet it's got me wondering if I shud tighten up my position one more hole in the aluminum bracket (2 holes exposed). Ur thoughts?
@WadeHarrison
10 ай бұрын
I'm 5'10"
@darksidecarnival5385
10 ай бұрын
@@WadeHarrison thanks for ur reply Wade! That helps me. I'm 5'8"
@brentwade9346 Жыл бұрын
I'm finding the most irritating thing in the Stout 2 is the nuts on the forward knee brace screws actually digging into my knees...probably gonna glue some foam over them.
@WadeHarrison
Жыл бұрын
I put that supplied peel and stick foam up there to pad all that out.
@followingrj Жыл бұрын
What glue are you using to glue the foam in?
@WadeHarrison
Жыл бұрын
The best stuff I have found and what is used at most kayak manufactures its amzn.to/42qS1Aq 3m spray 90.
@hughloraine96602 жыл бұрын
I’ve watched a few outfitting videos, but so far no one has talked about when to move the thigh braces forward or backward.
@WadeHarrison
2 жыл бұрын
I will post something on that soon
@lynnrmiller10 ай бұрын
How do you move the thigh hooks?
@WadeHarrison
10 ай бұрын
3 bolts and bottom nuts front and back are 10mm and a 4mm hex the ones in the wings are into inserts
@holmespun Жыл бұрын
What are the approximate dimensions of the heel block you use?
@WadeHarrison
Жыл бұрын
6” across and 4” in the center it’s not a big block
@holmespun
Жыл бұрын
@@WadeHarrison Thanks, Wade! That's very helpful.
@jonowood30292 жыл бұрын
Have you got a wavesport desiel to do a review
@WadeHarrison
2 жыл бұрын
There’s supposed to be some wavesport boats delivered to USA and will have review on one if get in one I have paddled the Phoenix and have some content on it
@kellydoyle7833
10 ай бұрын
They still make a Diesel ? I have a 2009 Diesel 70 and 2008 Habitat 74. I'm same size as you. You're welcome to them anytime....currently outfitting my scorch 😊. Really appreciate your coverage of this topic. Foam at your knees /thigh hook and feet looks to be 2" or 3" thick? My knees are always knocking around. I've got to fix that!
@merlinmess37932 жыл бұрын
Always loose my back band ratchet strip… I have put a hole i. Each and run a small cable tie with end left on to act as a stopper and retrieval device
@WadeHarrison
2 жыл бұрын
I was worried that it would jam up or damage the rachet if I did that, I should relook at that
@merlinmess3793
2 жыл бұрын
@@WadeHarrison was recommended by someone that’s used pyranha for years… touch wood… it’s working so far
@merlinmess3793
2 жыл бұрын
I had to do something to stop it going in, I’m 6’3 with adult sized hands. I’ve lost the ends twice, one on the river the other in the pool… I had to get tiny hands to help me, I’d even tried the bend back on the ratchet. Seems to be holding though
@yakob.simpson2 жыл бұрын
I want a Scorch with contour outfitting
@WadeHarrison
2 жыл бұрын
The Stout 2 is dam solid if you take a little time set it up, I added foam Under my thighs works just fine and with the hookers installed the Pyranha thigh hooks are really good better then daggers
@bfosterkayaking
2 жыл бұрын
Jakob there’s a guy I know how has installed full Contour outfitting in his Scorch L. It made the boat even heavier, but it looks awesome, and he claims it is stronger and safer that way. It is doable!
Пікірлер: 57
This was actually really helpful. I like the foam under the end of the seat and bulkhead additions.
@WadeHarrison
2 жыл бұрын
Gald I could help
Always learning something from you wade thanks for the tips
@WadeHarrison
2 жыл бұрын
Just a few ways to get little more control
Sweet video !! Thanks
@WadeHarrison
2 жыл бұрын
Your Welcome
Just what I needed to know … thanks Wade
@WadeHarrison
4 ай бұрын
👊🏻😎
Great vid thanks
@WadeHarrison
Жыл бұрын
Thanks
Wade - Brilliant outfitting tips ~ (definitely will utilize for Scorch X outfitting) - curious about the foot block - I've seen others drill holes (make the main block like swiss cheese) and then sandwich that w/ thinner foam to absorb hits. Have you ever messed with that strategy? Also on the seat shims... You do that in lieu of the bigger shims that come with the boat, yeah? (I'm looking to improve connectivity in the X) - All the Mahalos for sharing your experiences and insights - saves a tonne of trial and error - SALUD!
@WadeHarrison
2 жыл бұрын
The seat shims were some dagger hip pad foam that in a small wedge I just glued it in there. And as far as the bulkhead I have seen paddlers putting holes in foam to add extra impact but really I think of foam out the bulkhead it’s fine I do wish Pyranha would give you a thicker block to work with.
awesome tutorial! Question: best way to attach foam shims to an existing foot block? glue? double sided tape? two sided velcro?
@WadeHarrison
22 күн бұрын
Spray 90 glue it’s the best amzn.to/3LlG1ZK
Hey Wade - great content as ever! I demoed the Ripper 2 this weekend - loved how the boat paddled, but felt like the back band and hip pads sat very low on my back and hips, and not very secure almost like i'd slip out the boat on capsize. Is this kinda what the Scorch felt like before you made your adjustments, and does it feel more secure now if so?
@WadeHarrison
2 жыл бұрын
I made a video on what I did to mine with the backband upgrade and it helped the hip pads also
Thank you for the ratchet trick!!
@WadeHarrison
2 жыл бұрын
Glad I could help
Love the tips! would you consider doing this sort of video for other styles of outfitting like the contour ergo/LL Whiteout?
@WadeHarrison
2 жыл бұрын
I did start on a contr video when got my phantom but never finished it guess could throw something together
@jackberriman1131
2 жыл бұрын
@@WadeHarrison that would be sick!
@WadeHarrison
2 жыл бұрын
@@jackberriman1131 yeah I will see what I have on it
Really liking those leg lifters!
@WadeHarrison
2 жыл бұрын
Yeah I have done that in a few other boats and works well..
@FeWolf
2 жыл бұрын
@@WadeHarrison do vid about it, hell sell me pair
@MTmixer84
2 жыл бұрын
I have made my own for my boat out of layers of stock foam it came with . Nothing aggressive but it helps. I actually would like to add more to mine but it makes the seat slightly uncomfortable. I'm tall and skinny so I have fitment issues every where lol.
@WadeHarrison
2 жыл бұрын
@@MTmixer84 yeah I try to customize about every kayak I paddle some way
Hey, I would love to see a video that provides a template or measurements for the heel block. I tried to make one for the ripper, and it ended up just being a massive waste of mini cell foam lol.
@WadeHarrison
2 жыл бұрын
I will try to cover it in another video
@followingrj
Жыл бұрын
@@WadeHarrison I agree with Wyatt, a video on this would be super beneficial. Where do you pick up foam like that or is it just older foot block foam that you used by cutting it to shape to fit there?
@AndrewMoizer
Жыл бұрын
@@WadeHarrison I'd love to see more detail on this too. Just got a Scorch X yesterday, so outfitting it today. Also would appreciate more info on what float bags you like, especially for the X where's there's more boat to fill up. Thanks again for all your content.
Question: on the water bottle and throw bag. you just cut a through hole on your front foam block to attach a bungee string/rope? also,what buckle is that that holds the throw bag?
@WadeHarrison
4 күн бұрын
No this all comes installed on this model
Hey Wade do u mind me asking how tall u are? I run my seat in the middle holes, I have the Thigh Hookers installed and I notice ur mounting ur aluminum bracket 3 open holes from the front. I have the OEM foot pad on the OEM foot rest pod. I'm in a 2021 Machno. When I see how much ur knees are bent and the angle of ur feet it's got me wondering if I shud tighten up my position one more hole in the aluminum bracket (2 holes exposed). Ur thoughts?
@WadeHarrison
10 ай бұрын
I'm 5'10"
@darksidecarnival5385
10 ай бұрын
@@WadeHarrison thanks for ur reply Wade! That helps me. I'm 5'8"
I'm finding the most irritating thing in the Stout 2 is the nuts on the forward knee brace screws actually digging into my knees...probably gonna glue some foam over them.
@WadeHarrison
Жыл бұрын
I put that supplied peel and stick foam up there to pad all that out.
What glue are you using to glue the foam in?
@WadeHarrison
Жыл бұрын
The best stuff I have found and what is used at most kayak manufactures its amzn.to/42qS1Aq 3m spray 90.
I’ve watched a few outfitting videos, but so far no one has talked about when to move the thigh braces forward or backward.
@WadeHarrison
2 жыл бұрын
I will post something on that soon
How do you move the thigh hooks?
@WadeHarrison
10 ай бұрын
3 bolts and bottom nuts front and back are 10mm and a 4mm hex the ones in the wings are into inserts
What are the approximate dimensions of the heel block you use?
@WadeHarrison
Жыл бұрын
6” across and 4” in the center it’s not a big block
@holmespun
Жыл бұрын
@@WadeHarrison Thanks, Wade! That's very helpful.
Have you got a wavesport desiel to do a review
@WadeHarrison
2 жыл бұрын
There’s supposed to be some wavesport boats delivered to USA and will have review on one if get in one I have paddled the Phoenix and have some content on it
@kellydoyle7833
10 ай бұрын
They still make a Diesel ? I have a 2009 Diesel 70 and 2008 Habitat 74. I'm same size as you. You're welcome to them anytime....currently outfitting my scorch 😊. Really appreciate your coverage of this topic. Foam at your knees /thigh hook and feet looks to be 2" or 3" thick? My knees are always knocking around. I've got to fix that!
Always loose my back band ratchet strip… I have put a hole i. Each and run a small cable tie with end left on to act as a stopper and retrieval device
@WadeHarrison
2 жыл бұрын
I was worried that it would jam up or damage the rachet if I did that, I should relook at that
@merlinmess3793
2 жыл бұрын
@@WadeHarrison was recommended by someone that’s used pyranha for years… touch wood… it’s working so far
@merlinmess3793
2 жыл бұрын
I had to do something to stop it going in, I’m 6’3 with adult sized hands. I’ve lost the ends twice, one on the river the other in the pool… I had to get tiny hands to help me, I’d even tried the bend back on the ratchet. Seems to be holding though
I want a Scorch with contour outfitting
@WadeHarrison
2 жыл бұрын
The Stout 2 is dam solid if you take a little time set it up, I added foam Under my thighs works just fine and with the hookers installed the Pyranha thigh hooks are really good better then daggers
@bfosterkayaking
2 жыл бұрын
Jakob there’s a guy I know how has installed full Contour outfitting in his Scorch L. It made the boat even heavier, but it looks awesome, and he claims it is stronger and safer that way. It is doable!