I vote supercharged to start with, for sure. There are some really cool and wicked options that people have done/ figured out over the years. Plus it would be different, and a fun car for you guys to mob around in, drift, daily, whatever... Thanks for the great video/ content, as always...

@justinlepp5645

2 жыл бұрын

As not a normal thing for Kyle... I completely agree with you...

@CampyCamper

2 жыл бұрын

I agree. If they do decide to turbo it though, they should go for a small one that lights up really quick, and make this car a fun little drift/autocross/daily car.

@anthonycollings5845

2 жыл бұрын

They would have to pully the shit out of it which would be awesome!!

@whoscitric

2 жыл бұрын

Superchargedboiz

@duweydang

2 жыл бұрын

MercRacing supercharger would be sick!

Can K-Power make a kit to k-swap the impact wrench @ 0:40? Because they'd have at least 1 customer, just saying

@gafrers

2 жыл бұрын

After using another impact wrench to anchor the engine on the floor before the patented Torque Test starts 👍👍

@austinh1028

2 жыл бұрын

rushing the flywheel bolts was BRUTAL lol

@dr.fixall4808

2 жыл бұрын

2 turbos out the hood would be fun an call it the twinturbokrz lol do it

@TopGoose-bf1mx

2 жыл бұрын

Fancy seeing you here.

@802Garage

2 жыл бұрын

Hahaha seeing each other everywhere now!

One tip, be sure to turn the A/C off when revving the engine to 7000rpm+ because it can overrev the A/C compressor.

@eazysteezy23x85

2 жыл бұрын

🤦 thank you for the lesson my type s should’ve known better

@knightfall7534

2 жыл бұрын

Larger pulley then, to compensate for the rpm difference. Idk if anyone makes those tho.

@danieljames5875

2 жыл бұрын

The factory computer cuts off the compressor off when nessasery. Only applys to factory ecu's

Awesome build guys, I’ve been watching for the last 2 years but caught up quickly binge watching. Epic builds and who cares if a little something isn’t perfect adds character haha.

Welcome to the Honda channel everyone, k swaps will always be what drives success here for it is what started this whole journey.

@Matty.Hill_87

2 жыл бұрын

K swap the world ✌️😂

@EASTSIDERIDER707

2 жыл бұрын

Party on!

@deadinsidegarage

2 жыл бұрын

Actually what started it was his hatch an the H swap.. it was just done by the time the channel started

@vtecmossy

2 жыл бұрын

Yeah h swap started it all where u been like 🤔😂

@kirmanila.rocque5409

2 жыл бұрын

H swap came first though.

Kyle that factory strut brace does a lot for stiffening. You can tighten it on the ground then loosen it on the lift and it will shift. You should fab something up using those mounts. Love what you and Wyatt do. Keep up the great videos 👍🏻

@von...

2 жыл бұрын

+1. if a cheap car comes with strut tower braces, you best believe they are damn near necessary - otherwise they would have gotten cut out of the final design to decrease costs.

@mintysquinty2989

2 жыл бұрын

your mom does a lot for stiffening

@pablopicaso8374

2 жыл бұрын

@@von... Just about anything performance wise comes with a strut tower bar these days. He'll even Explorer STs do they are definitely worth it for Kyle to make one

@vojtasTS29

2 жыл бұрын

this comment

@Alexander-sr5fg

2 жыл бұрын

I've driven mine with and without those, the difference on the road is near imperceptible

This is my favorite build you've done boys. Would love to see you S/C it. Had a buddy growing up who had a JR supercharged D16 in his EG, and it sounded just nuts. Amazing to see how much you've leveled up since your first vids. I respect that you started out doing everything bang for the buck, learning as you go, and making it work with what you had. Now, even though the cars, parts, skills, and budgets have gone way up since the ol days, you guys always have kept that humble "you can do this at home" vibe. Stoked for the crew. This build is gonna be unreal.

@Officialtheminimalmom27

2 жыл бұрын

🔝🔝🔝Thanks for the feedback, Expect more videos soon Send a direct message I have something for you..,,,,....

I'm so glad you decided to go back to this style video where you are in the shop working and you are showing it getting done thanks love the channel guy's

For sure needs a supercharger. Think it would work well in the chassis. Like the og mr2's with supercharged. Would love to see that done

@tuckermorris2099

2 жыл бұрын

That’s the first thing I thought of! He should definitely SC it!

More reliable, more power, and it's already a cool car/chassis with a good body kit. I think you should keep it this Kyle, maybe a different color tho.

We dig it. Keep K Swapping everything! There is something to be said about knowing your motors and the tuning for them.

Love this quick build, hope you'll get alot of seattime out of it 💪🏻

That's really awesome! Having said that, for $10,500 for the kit, it had better be that easy!

@maccoman71852

2 жыл бұрын

I was honestly wondering

@ThomasTT496Vega

2 жыл бұрын

10k,! What are they on?

@seanharrison6162

2 жыл бұрын

@@ThomasTT496Vega I mean thy provide everything up to the drive shaft it honestly has to be a significant amount nit saying it's fair just saying it makes sense especially in this car climate

@bartonmd

2 жыл бұрын

@@ThomasTT496Vega I mean, if you look at the individual parts, it's probably not too far out of bounds... Header is $1k, custom cast intake is $1k, clutch setup with custom flywheel is $1k, engine/trans mounts are x-amount, stand-alone ecm is $1k, CNC cut trans adapter is close to $1k, drive shaft is a few hundred, etc. Etc. You've also got to think this isn't for every BRZ that's getting modded, it's just for some of the ones that are getting a K-swap, where people want to buy the kit. I'd be surprised if they sell more than 50-60 of these kits in the next 5 years, so you're amortizing your R&D over not very many units. You also don't have much in the way of economies of scale in that many parts.

@AjJabaay

2 жыл бұрын

Beautiful parts, made in USA, Tons of development.... You can't be shocked when it isn't Alibaba cheap . Once swapped, at least you get reliable cheap engines !

I would like to build a frs k swap. Looks like there is room for a supercharged version. 400 rwhp supercharged k would be great on the roads. It would be mild and not to crazy and dependable.

@FaterialL

2 жыл бұрын

hmm awd ?

@aleclenzen8347

2 жыл бұрын

They aren't as reliable as you would think. A lot more vibrations and lots of issues throwing belts. Would be cool still.

@jonathanb4913

2 жыл бұрын

If the belt tensioner was replaced with a new one and right size belt, the belt would not fly off.

@kxlucifer

2 жыл бұрын

@@jonathanb4913 correct if its. A didicated drag racer no issue but use as a dirft car supercharger will eats the belts right up taylor ray already explained why he went turbo on his ls drift vette

@dadhats

2 жыл бұрын

@@kxlucifer what makes drifting specifically tear up the belts??

You inspired me to build my D series motor after I watched you and your buddy build one a few years ago😂 I’m only 18, she’s fully built and running great! Love your videos!

Cleetus "month of Freedom" Kyle "weeks of nothing" :)

@budddove6480

2 жыл бұрын

Lol

@tacticalmattress

2 жыл бұрын

Yeah it's not good. Cleet is continuing to expand and gain more subs, pretty rapidly too. The boiz have tapered off cause a lack of content.

Doing a bunch of k-swapped BRZ giveaways would be fricken badass

@carlosserrano3920

2 жыл бұрын

Hell Ya Brother!!!!

@niteriderevo9179

2 жыл бұрын

heck, i'd love one, good-looking little car with an engine you about can't kill with proper maint, especially with a beefed bottom end [k-series stock rods tend to be toothpicks with any real torque, t-ray spectacularly blew his cefiro's first k-series up from this..]

I’d say supercharged is the move on this build imo👌🏻🔥

@CrashRacknShoot

2 жыл бұрын

Been seeing a lot of love for the rotrac superchargers on this engine. As someone playing around with this very idea Kyle is doing here, this little build video here is a damn godsend on how to get it running!

Kyle really managed to piss off everybody in the first minute of the video 🤣

Bro the channel and cars are yours. It shows ur achievements thru the years. And u have come a long way brother. Keep it up. Love the content. Bless

@Officialtheminimalmom27

2 жыл бұрын

👆👆 congratulations I got a surprise package for you 🎀🎁..,,

You definitely need to slap a supercharger on the FRS, everything else has turbo, need to make one build a little different

@balancemode4112

2 жыл бұрын

turbo is better

@upurkilt7246

2 жыл бұрын

@@balancemode4112can tell your a younger person by you comment explain why you think turbos are "better" as both superchargers and turbos have there place in the world and both have there pros and cons. Like anything.

@TexasDmax_2k

2 жыл бұрын

Turbos are better agreed!! Turbos are free power n can produce a lot more power then a supercharged on a small engine like the K

@ArmchairCarcass

2 жыл бұрын

@@upurkilt7246 but… turbos are better?

@upurkilt7246

2 жыл бұрын

@@TexasDmax_2k i agree we all love a turbo k series but it doesn't mean its better. It all depends on what you want to do with the car. Both have pros and cons in both applications You can make over 500hp out of a stock engine supercharged k series same as turbo k series. The supercharged engine will make power from idle right trough the rev range. Turbo will only start making power till its on full boost at around 5k.

Supercharger would be cool and different for the FRS. Even a pro charger would be nice!

@Thecasualgamer-pp5wc

2 жыл бұрын

Pro charger is a supercharger. Procharger is just a brand that makes centrifugal superchargers

Had some two Scion tC's and a xB loved them both it made me sad somebody else like them so much they had to him me in them. They were great car and fast. I can only dream how fast this will be. 500hp turbo will be a super car and anything over will be a over the top awesome! Love y'all's builds, Kswap the world

Love the content. Y'all do y'all. Don't give two craps what anybody else says! Can't wait to see the future content. I'm excited about the FRS.

@zac1567

2 жыл бұрын

what content? since he started getting more subs/views he has taking a leave of absence with his gf. dude forgot about his job

I love the "any socket is an impact socket if it has a warranty" attitude at the begining.

Hell yes brother, Kswap the world, keep the great content coming, love the knowledge you give explaining the difference you need for k24 , k20 US and import

Ahhh finally. Haha I run and load mold machines for work I and I love watching your vids when I get a stupid easy part I literally save them for those days 😂 cheers boys working hard we all love to see it

the first 30 seconds made me laugh and like the video , love it kyle you do what you love you always have and thats why we watch and support you :)

Got that swap done quick kyle!! Nice work man 💪👍👊🏻

@mikebanks6704

2 жыл бұрын

This man's quick with getting on shit compared to most youtubers

@puntachu

2 жыл бұрын

@@mikebanks6704 other youtubers: we just got the engine shipped today, should only be about 3 months ! Kyle: we got the engine an hour ago, it’s pretty much all set besides the a/c

I am a big fan of the I Don’t care statement. You gotta do what makes you happy in the long run.

Nice for showing this bro.. always wanted to see some1 k swap a brz/frs and showing us what is needed to make the magic happen..

This has always been a dream of mine glad to see y’all finally do it!

I’m honestly excited about tho build ! With all the great work you guys do, this car will be insane!

Been following you for years. This build is sick keep up the good work g!

I love what u do man keep on doing what u do man support all the way

I’ve watched you for 5 years do what makes you happy brother! If you wanna k swap the world go for it! I’ll stay watchin!

Crickets.......... The only excuse for not posting ill except, is a bad case of pink eye.

Go for a supercharger! A big blower would be hilarious and give some epic torque with the higher displacement of the K series!!

@maccoman71852

2 жыл бұрын

yes!

@TakeNoShift

2 жыл бұрын

How would a blower be possible? I'm thinking a centrifugal makes the most sense.

@kylespivey5405

2 жыл бұрын

@@TakeNoShift yeah a blower would just simply be too much work and isn’t smart, if anything centrifugal or procharger

@pauledwards6446

2 жыл бұрын

@@kylespivey5405 procharger is centrifugal

@doktermobiel

2 жыл бұрын

Wasn't torque something K-series didn't like? I recall something about bottom ends getting destroyed (Taylor Ray his Cefiro) after getting more low end torque .

I just stumbled across your video after blowing up my supercharged BRZ & wanting to do a K-swap. This video alone convinced to do just that. Subbed

Keep k swapping stuff dude you're the best car channel out there!

I'm a big Honda and Toyota fan. And when I first saw the 86 I was all like "hellz yeahz" until I found out it was getting a N/A Subaru boxer 4. Then I was like "damn that things gonna be a very stylish paper weight". We all know how reliable those Subarus are for building power. They are massive pieces oh shat. Other than an aluminum small block V8 the K swap is about the best thing for that little car. Awesome job. I want one now.

@MrBluePoochyena

2 жыл бұрын

The FA series engine used in the BRZ/FRS/86 is actually reliable and can handle power better (when built to similar specs) unlike the EJ series which is known to be unreliable

@TANGYHATCHY

2 жыл бұрын

Guy saying aluminum small block V8 tells you everything you need to know about him.

@waterloo123100

2 жыл бұрын

A Vr6 would be a cool swap into of these too

@TANGYHATCHY

2 жыл бұрын

@@MrBluePoochyena he’s a 350 Chevy guy there ain’t nothing getting through that thick ass skull

@worldssickestmedia2713

2 жыл бұрын

@@TANGYHATCHY I can almost guarantee you that the alloy block V8 I have in mind isn't even on your radar or part of your vocabulary.

Anyone who complains about a k swap on this channel, is like some one who doesn’t want to see shootin on a “guntubers” channel….. just finish up swapping up the world, I mean within reason…. Keep the great work moving. I am only at the intro soooooo

I love how y’all are dogging the boxters! Can’t wait to see it running.

Imagine being pissed of that a youtuber has too many projects and will have to make too many videos that you'll have to watch xD Great job Kyle! I'm looking forward to seeing how this one goes, and seeing the MR2 get fixed, and seeing the Duramax race truck, the LS swapped Silvia, the hatch of course etc etc.... Keep up the great work 👍

I love the way the FRZ86 look. This is a perfect swap for this car.

UEL headers for that subie rumble. I believe 1320 makes some for Honda cars

@michaelbull6906

2 жыл бұрын

Not for rwd only for fwd

@sandpiper1515

2 жыл бұрын

@@michaelbull6906 I'm sure you can modify them to fit, or just have them made since they're pretty easy to make. just have to get the loop right.

Awsome work guys keep it coming 👍

GIGGLE... I LOVE WHEN KYLE TALKS ABOUT "MODIFYING" LOL 😆😉 JK, LOVE EVERYTHING Y'ALL DO 💚

K swap a Delorean next.

i know they are called the "boosted" Bois but i would really like to see these guys build a rev happy n/a k series with itbs and put it in something tiny.

@kxlucifer

2 жыл бұрын

Itb/turbo combo would be nice

You Sir are for sure not moving back. Your officially a Floridian. Glad to have you down hear.

Another amazing video!!! Keep the great content coming bro!

@Officialtheminimalmom27

2 жыл бұрын

👆👆 congratulations I got a surprise package for you 🎀🎁

Hey Kyle, it's awesome that you're already K-swapping the FR-S. Just wanted to give you a heads up that if you decide to go the forced induction route with the K-swap the Aisin trans in these FR-S don't take kindly to torque. Anything over 300 ft-lbs of torque will probably grenade these as they are not very strong, so you might have to look into alternatives for a trans down the line. Much love and as an FR-S owner myself its awesome to see you do the swap I always wanted to do!

@ISuckUnderPressure

2 жыл бұрын

He’ll be fineee they’re like $200 for a new one

@It5M3Again

2 жыл бұрын

Good tip. I hope he sees this.

Glad you didn’t take much time swapping this car after your announcement of purchasing it. Thought it might be like your Sidekick(which I know you got parts coming), but I figured we’d be waiting for awhile. Hope your genuinely happy with how things are going for you, been watching your videos for quite some time. Edit: 2nd your for you're

I love the high energy explanations.... glad I'm not alone 😂

Would love to see you guys do some road course stuff in this car. Doesn't need more power for that really. Cheers!

Haters are gonna hate. Kyle you do you I think what you’re doing is awesome and you do a great job. It’s awesome that your girl is there helping you with the cars. my wife hates cars and me working on them. Lol

@slappomatthew

2 жыл бұрын

I'm sure that will change soon. it always does.

What an amazing project Kyle is there going to be an update on the mr2

I definitely ain't pissed off. I bet this k swapped frs is gonna be a very fun car to drive. You actually got me thinking about doing this 🤣

If the frs was honda powered to start with I would definitely have one in my driveway!!!!! Awesome build and keep up the good work!!!! God bless!!!!

@Officialtheminimalmom27

2 жыл бұрын

🔝🔝🔝Thanks for the feedback, Expect more videos soon Send a direct message I have something for you....,,..

if they are complaining about your k=swaping, they're not real boosted boiz fans... just saying

@boosted2.4_sky

2 жыл бұрын

Meh.... That's not entirely true...I've been here since before the first 20,000 and I'm not very interested in Hondas or "Kswaps"...I have a 600 horsepower Chevy Ecotec.... you can be a fan of a channel and not necessarily be a fan of Honda's

@whataboutbob9326

2 жыл бұрын

@@boosted2.4_sky ok, you do you... its all good bro

@ibrooksie

2 жыл бұрын

@@boosted2.4_sky You aint a real fan. Period.

kyle got his subs and now barely post LOL

Love the K in it!!!! Wish you would have done a 3 rotor would have been sick!! 10 thousand revs would have been awesome!!

That looked like it was the Easiest K-Swap you have ever done. it looks like that kit fits like a glove! I am glad you're considering something other than a turbo! Have fun with it NA first though so you can tell the difference. That would be an Awesome project car for a father and son team! Now I have an itch, I need scratched Damn it Kyle! Whitt just full send the hood!😂😂😂👍🏻

Yooo lets go boiz cant wait to see this beast on the track! Put some fat indy 500's on it and good coils and do some time attack!

Sooooo sick! I could see myself doing this one day cause these cars seem so fun but I’ve always hated that they come with the boxer motor 👎, but this is badass!

@It5M3Again

2 жыл бұрын

Yea its so dumb. Toyota has engines that they could use in them. I dont understand why they would use a subaru engine.

Love this build and all your builds. Hopefully we get to see you drift this thing while the 240 is down

Absolutely beautiful, I love it!

Call it the K-rs and make a badge for it 🙂

This should be a N/A track build. That would be something. RWD with the K-series and the 86/FR-S chassis sounds like a good match to me.

Keep up with the k swaps i think they are cool and i love to see your passion for them.

Wyatt rolling in changed the whole demeanor of the video! Glad to see our dude back in the shop!!

is this gonna be a track or daily car? i never know at this point 😂🖤

@T3MOTO2

2 жыл бұрын

That’s the fun part. You never know what’s gonna happen

@BikZom

2 жыл бұрын

I think he's building car for his gf

@ibrooksie

2 жыл бұрын

Porsche is his daily already.

@Skitrun999

2 жыл бұрын

@@ibrooksie who said you don’t need another 😂

@bryduhbikeguy

2 жыл бұрын

Yes.

yea supercharger is a good option reliable and more tq and something different in the channel to many turbo cara already

The "K-Smack" swap! Love the old school "clearance" mods!😆

Great build !

FIGHT JAMES FOR BLOWING UP WAGO

I'd love to see you guys do a J swap NA brz with a 6 into 1 exhaust and iTBs, make a real NA screamer.

@mattmanyam

2 жыл бұрын

Did you see the ones on Brent's channel a while back?

@draggonhedd

2 жыл бұрын

@@mattmanyam That was my inspiration!

@mattmanyam

2 жыл бұрын

@@draggonhedd sounds about right!

Crazy... I'm pumped for this build

Hope all is good just remember the fam is over 1 mill strong if u need anything

Next you gotta kswap a first gen Scion xB

@JnixMarshel

2 жыл бұрын

Go home.

Who is fussing about K-swapping? LET ME AT'EM! WE'RE going to K-swap the world!

@CrashRacknShoot

2 жыл бұрын

Damn right!

Great job!!! Thanks for another video. We appreciate all your hard work. OMG!!! Is there a third gear??!!! 😄

Supercharge it for sure. Fits in there real good. nice job.

Why is it soon as KZreadrs hit 1 million subscribers the uploads are just talking rambling on and uploads are far apart 👎🏼

@hinds90

2 жыл бұрын

I made a comment a few months ago saying the content isn't as good as it use to be and people jumped all over me lol. Hopefully it's just him waiting on parts but uploads did start lacking around the time he got his girl down. So many epic projects big tire ek coupe, side kick, k series jet boat..... let's get it Kyle.

Smart to get your girl friend a tuner K series BRZ. Very cool she gets to learn and enjoy going to meets with the BB!! Keep the content Kyle! Y’all are doing amazing!

@Officialtheminimalmom27

2 жыл бұрын

👆👆 congratulations I got a surprise package for you 🎀🎁

I love this build. I'm down for seeing a supercharger install. 👍🤘🤘

Love this build!

To those who complain about the boys doing ‘another k-swap’ you’re clearly not an OG subscriber, these guys are specialists in the k series and have a big love for them

It's going to be a sweet little ride Kyle, nice job guys. Oh, don't forget the snail though lol.

@Officialtheminimalmom27

2 жыл бұрын

👆👆 congratulations I got a surprise package for you 🎀🎁..,,

I LOVE the clearencing Skills 🤣👍🏽👍🏽

Great video guys! Let me know if you need any parts when you decide to Turbo it. Keep putting out great content!

I have a Kpower industries kit also. Make sure you put a flex joint in the exhaust. Prone to cracking the header at the 3 bolt flange

Love it!!! Do your Thang Brody!

@Officialtheminimalmom27

2 жыл бұрын

🔝🔝🔝Thanks for the feedback, Expect more videos soon Send a direct message I have something for you......

Kswap the world hater’s will always be hater’s love your content super informative and educational keep it up

Kyle: we gonna keep it mild . Also Kyle: SEND IT

It would be awesome to have a surcharged, turbo’d k series. Compound turbo set up. One of kind special off by the boostedboiz. Thanks for fun, exciting content since the beginning days and continuing on

I love the BRZ, always have. Glad to see ya'll beefing her up some.

Why does this give off the feels like back in the day when all the boiz turbod the integra at cletus’ place in one day!?!? So awesome!!!

K swap the world should be your next TShirt with that FRS printed on it. Dude you always have the best swaps on your channel. YouKe it look so freaking easy that it makes me (a noob) want to swap something