Origami Phoenix by Lien Quoc Dat - Part 3
Тәжірибелік нұсқаулар және стиль
The LAST PART! Click here to go to the other parts:
Part 1: • Origami Phoenix by Lie...
Part 2: • Origami Phoenix by Lie...
When we first saw a picture of this model, our mind was blown!
Making a tutorial for this model is truly a dream coming true! We would like to thank Lien Quoc Dat for collaborating with us and giving us permission, as well as Gonzalo Garcia Calvo for his picture.
Lien makes so called 'money origami', so you could actually fold this model from money bills!
Check out Lien's KZread channel: / @lqdorigami
Gonzalo's Instagram: / gonzalorigami
This video was made in several parts because it's complex and needs some time for a good explanation so here are the other parts:
Part 1: • Origami Phoenix by Lie...
Part 2: • Origami Phoenix by Lie...
Paper used in the video: 5 squares of Nicolas Terry's yellow tissue foil 20x20cm/ 8x8 inch cut into half squares. www.origami-shop.com/soie-met...
Level: Complex. But surprisingly easy for the impressive result!
Enjoy!
0:00 Introduction
0:08 Small tail
10:42 Large tail (x3)
19:24 Assembly
30:07 Result!
Пікірлер: 89
Congrats on the final part!
@JMsOrigamiTutorials
3 жыл бұрын
Thank you so much!
I am so proud of my model, THANK YOU SO MUCH FOR THIS TUTORIAL!!!!!!!!
@peterrusnak4467
2 жыл бұрын
it is fake an origami must be from 1 piece of paper and it is shame if you use more than one piece or use glue or use scissors
@Awfqlly
2 жыл бұрын
@@peterrusnak4467 chill bro, u don't gotta be so angry my guy, everyone isn't gonna do what you say, and being rude will make people care less k
This one is INSANE!!! Really good tutorial. Maybe I'll make one someday, after a few days of practice haha...
@JMsOrigamiTutorials
2 жыл бұрын
Just give it a go :)) It's an amazing design
Beautiful work JM
@JMsOrigamiTutorials
3 жыл бұрын
Thanks a lot!
Beautiful. Absolutely beautiful.
Very good, but one criticism: it's often hard to tell from the diagrams which side is which. I suggest making the grey competely opaque, and instead of using transparent for white use opaque white. This is especially the case halfway through the large tail, where the diagrams don't entirely add up and you folding doesn't really help clear it up. Also, sometimes your diagrams and your folding sequence do not add up.
@JMsOrigamiTutorials
3 жыл бұрын
These are not my diagrams, we ask permission to the author to use them. It can occur that I perform a step a bit differently. In the beginning there is clearly indicated white or colored side up so if you follow the instructions clearly and you turn the paper when I turn it, there shouldn't be a problem I think. Because these diagrams are not mine, I can't change the colors..
@bocbinsgames6745
3 жыл бұрын
@@JMsOrigamiTutorials Well I got the phoenix done anyway
Yes done! I will get you a picture as soon as it dries!
@scratchtutorials4kids987
3 жыл бұрын
You asked me in the last part :)
tysm! its really beautiful. It took me 2 days to finish it. Its easy but the progress is long.
@JMsOrigamiTutorials
3 жыл бұрын
Congratulations! Hope it was worth the effort :)
First like, first view This modular model is the best model so far❤️😍
@JMsOrigamiTutorials
3 жыл бұрын
Glad you like it!
@user-vh6nk8bt3s
3 жыл бұрын
Yes!
My Phoenix will be done by tomorrow
@JMsOrigamiTutorials
3 жыл бұрын
Lovely :)
@GilgameshMorningstar8
3 жыл бұрын
@@JMsOrigamiTutorials my phonix is nearly done
@GilgameshMorningstar8
3 жыл бұрын
By the way my phonix is double size
@JMsOrigamiTutorials
3 жыл бұрын
@@GilgameshMorningstar8 Cool! Show me :)
@GilgameshMorningstar8
3 жыл бұрын
@@JMsOrigamiTutorials how can send a picture to you?
Can i make it with 40×40 cm paper to big the size of phoenix or it's not gonna work by this size of paper ?
@JMsOrigamiTutorials
2 жыл бұрын
40x40cm for every separate piece??
This guy: My goal is beyond your imagination
Well done 👍👍👍👍👍👍👍
@JMsOrigamiTutorials
3 жыл бұрын
Thank you!
@hoangminh8761
3 жыл бұрын
Hi
@hoaicu
3 жыл бұрын
@@hoangminh8761 hi
Gonna start today and also make my own paper
@JMsOrigamiTutorials
3 жыл бұрын
Nice!
👏👏👏👍
Done both 2 parts tomorrow it will be completed and day after tomorrow it will be assembled 😊😊
@JMsOrigamiTutorials
3 жыл бұрын
Please share your result!
@dhanushspurad8014
3 жыл бұрын
@@JMsOrigamiTutorials at where
@JMsOrigamiTutorials
3 жыл бұрын
@@dhanushspurad8014 E-mail or Instagram
Please tell which glue do you use
@JMsOrigamiTutorials
3 жыл бұрын
It's called 'Compaktuna', actually made for use in construction but it's really strong and ideal for fixing these origami parts. However, I'm afraid, as it is a Belgian producer, it is not available in other countries...
@harshmoharir7726
3 жыл бұрын
@@JMsOrigamiTutorials on thanks alot
@hauptmannpaul3130
2 жыл бұрын
Thanks for the question & answer as well ! This origami takes me so much concentration and precision. I'm trying to make the same details than the original but I can't do it as good as it is. (first time I'm doing an origami that difficult, with that much details). I don't understand how people do it in one day or two, I personnally can't make it in one time. Thanks for the tutorial !
@harshmoharir7726
2 жыл бұрын
@@hauptmannpaul3130 i think u should try bit intermediate level at first and advance ur way up also there are many channels . Here it is explained very well but also there are channels like Jo nakashima he shows each step w diagrams try his channel for a more intermediate approach
@hauptmannpaul3130
2 жыл бұрын
@@harshmoharir7726 You're probably right, but in the end I'm still able to do it. I mean, I've done the darkness dragon from tadashi mori. This was the first one that hard, but the details of the pheonyx require a lot of dexterity (and btw I don't have nails). Those details are one level of detail ahead than the darkness dragon in my opinion. Sometimes I use sticks to help me work on origamis. But you are right, my problem is that I haven't trained enough to understand how origami works in details and in precision. Should have do some others to train more. But It's for a present ^^' and my time is running out.
I skipped to the end. Beautiful.
@JMsOrigamiTutorials
3 жыл бұрын
Thanks a lot! Are you going to make it?
@filipchetwynd7746
3 жыл бұрын
@@JMsOrigamiTutorials no... i don't think i will. I for some reason avoid modular pieces. But still, undeniably stunning.
@JMsOrigamiTutorials
3 жыл бұрын
@@filipchetwynd7746 No problem, we have a lot of non modular tutorials on our channel too!
Next : origami shark
Yay i finally finish
@JMsOrigamiTutorials
3 жыл бұрын
Can you show your result?
Te recontra máster brother!!!
wow!!!!!!
I made it . But it's a torn page by now .🔥 Awesome 🆒 I made it
@JMsOrigamiTutorials
3 жыл бұрын
Congratulations!
Nice JM but that crow still haunts me🥴
@JMsOrigamiTutorials
3 жыл бұрын
What do you mean?
@ryan-yu3qi
3 жыл бұрын
@@JMsOrigamiTutorialsWe spoke about Brian Chans Crow. You didn't promise anything but i still can't finish it so it haunts me😱
Can you do cicada v1.2 from Kota Imai
@JMsOrigamiTutorials
3 жыл бұрын
Do you have his emailadress?
@sryali2788
3 жыл бұрын
He probably won't make a tutorial cause that model super complex and takes multiple hours.
@hoaicu
3 жыл бұрын
@@JMsOrigamiTutorials no
@hoaicu
3 жыл бұрын
@@sryali2788 I will never give up for this model.
Please please please keep posting I’ll even sub!!!!!
@JMsOrigamiTutorials
3 жыл бұрын
Yeah this saturday another tutorial!
Suggestion: horse by satoshi kamiya
@dry970
3 жыл бұрын
Btw what book are the diagrams in?
@sryali2788
3 жыл бұрын
@@dry970 for what
@dry970
3 жыл бұрын
The phoenix
@JMsOrigamiTutorials
3 жыл бұрын
Not possible...
@dry970
3 жыл бұрын
Why?:(
Make Indian spectacled Cobra snake tutorial
très bon model mais la plupart des schémas sont à l'envers
Its made by lqd money original
it is fake an origami must be from 1 piece of paper and it is shame if you use more than one piece or use glue or use scissors