The Oreck XL21 is back together but still needs a few parts and tweaks. Stay tuned for the airflow/suction box results coming soon.
Жүктеу.....
Пікірлер: 39
@pcdubya Жыл бұрын
Interesting, I just disassembled mine to wash the bag since the vacuum works perfect, but smells due to 15 or so years of filtering air. I couldn't get the nut off the fan attached to the motor, not much room and didn't want to break it. Bearings are fine so just cleaned it all real good. These Orecks are like old Snapper mowers or coleman stoves, quality made!
@vacuumtests92254 жыл бұрын
Oreck vacuums belong to the category what I definitely like. Simple lightweight direct air upright. Even the smaller Oreck is excellent, but this is definitely more desirable. Only downside is that especially the smaller model is super noisy. But otherwise fantastic design. I can't wait to see more videos of this 👌
@rnbsteenstar
4 жыл бұрын
I just wish they didn't lie about the weight (claiming 8 pounds, when it's more).
@Been8232 жыл бұрын
Thank you! 😍 You helped me a lot! I was able to clean mine! ☺️ I'm not afraid to unscrew it anymore!
@VacLab
2 жыл бұрын
Fabulous!
@KirbyEnthusiast4 жыл бұрын
Great video , really appreciate every video you put up . I’m learning so much .
@robotron172 жыл бұрын
"The ball bearing cage (also known as a ball bearing retainer or ball separator - these are used interchangeably), is the component in a ball bearing that separates the balls, maintains the balls symmetrical radial spacing, and in most cases, holds the bearings together."
@rockvillemike60622 жыл бұрын
Years ago, I worked in a piano refurbishing shop and learned a good trick to use with screws. Put the screw in the hole and turn it backwards with a little pressure pushing it it. 9 times out of 10 you will feel and hear a little click as the screw finds the threads already cut in the hole. Then when you tighten it it uses the threads already cut in the material. This puts less wear on the screw hole and keeps them from getting roached. Just sayin' Mike
@Jack-Surreal_Panes6 ай бұрын
My newer 21 has a cracked housing, trying to get fan off but nut is seated flush so will play with it but idea is to use this motor in another model, one with a smaller fan housing if that fin fits the shaft. Hopefully I get the wiring correct. LOL
@VacLab
6 ай бұрын
Best of luck!
@rnbsteenstar4 жыл бұрын
All in all, it looks so much better now. It was just disgusting before!
@VacLab
4 жыл бұрын
It certainly smells better now as well. 😁
@rnbsteenstar
4 жыл бұрын
@@VacLab I'll bet it does!
@jeremyfertig4187 Жыл бұрын
Sir I really do appreciate your videos. The camera work is good, the content is great...but with respect the audio between comments it is distracting at best. Not your problem at all of course...but figured I'd mention it. Please feel free to ignore :)
@VacLab
Жыл бұрын
Do you realize that this video you are complaining about is more than 3 years old? 🤣
@jeremyfertig4187
Жыл бұрын
@@VacLab Not so much a complaint as a observation but thanks for the video in any case. Take care :)
@kg5vacuums2054 жыл бұрын
I’m interested now of what this one will get on the airflow box since it dose have that different motor sounding to it
@VacLab
4 жыл бұрын
Airflow and suction video has just been posted. Enjoy!
@kg5vacuums205
4 жыл бұрын
VacLab I’ll check it out
@JustMe-eu7uj Жыл бұрын
Could you show where the wires attach too a friend took mine off to fix and didn't mark them so i need to do it myself
@georgemartinez17202 жыл бұрын
Great video
@VacLab
2 жыл бұрын
Thanks.
@noahstauffenecker78204 жыл бұрын
ohboy
@noahstauffenecker78204 жыл бұрын
vacuum the house with oreck xl21
@VacLab
4 жыл бұрын
I need to make a video of the handle repair and new brushroll installation first. Many more videos are coming using this machine. 👍
@SmedleyButler13 жыл бұрын
What kind of grease is best? I put a tiny amount of frog lube on a fan motor I cleaned and it smelled for a long time
@VacLab
3 жыл бұрын
For high speed bearings, Mobil EMB is hard to beat.
@georgemartinez17202 жыл бұрын
What grease do use on the Bearings that wont attract to much Dirt
@VacLab
2 жыл бұрын
Mobil EMB. You'll see it a lot in my repair videos.
@monicamoreno608810 ай бұрын
I need help I took mine apart to clean it and now it doesn't work
@VacLab
10 ай бұрын
Soooooo, what kind of help do you think you can receive based on no appreciable info other than it doesn't work? 😁
Пікірлер: 39
Interesting, I just disassembled mine to wash the bag since the vacuum works perfect, but smells due to 15 or so years of filtering air. I couldn't get the nut off the fan attached to the motor, not much room and didn't want to break it. Bearings are fine so just cleaned it all real good. These Orecks are like old Snapper mowers or coleman stoves, quality made!
Oreck vacuums belong to the category what I definitely like. Simple lightweight direct air upright. Even the smaller Oreck is excellent, but this is definitely more desirable. Only downside is that especially the smaller model is super noisy. But otherwise fantastic design. I can't wait to see more videos of this 👌
@rnbsteenstar
4 жыл бұрын
I just wish they didn't lie about the weight (claiming 8 pounds, when it's more).
Thank you! 😍 You helped me a lot! I was able to clean mine! ☺️ I'm not afraid to unscrew it anymore!
@VacLab
2 жыл бұрын
Fabulous!
Great video , really appreciate every video you put up . I’m learning so much .
"The ball bearing cage (also known as a ball bearing retainer or ball separator - these are used interchangeably), is the component in a ball bearing that separates the balls, maintains the balls symmetrical radial spacing, and in most cases, holds the bearings together."
Years ago, I worked in a piano refurbishing shop and learned a good trick to use with screws. Put the screw in the hole and turn it backwards with a little pressure pushing it it. 9 times out of 10 you will feel and hear a little click as the screw finds the threads already cut in the hole. Then when you tighten it it uses the threads already cut in the material. This puts less wear on the screw hole and keeps them from getting roached. Just sayin' Mike
My newer 21 has a cracked housing, trying to get fan off but nut is seated flush so will play with it but idea is to use this motor in another model, one with a smaller fan housing if that fin fits the shaft. Hopefully I get the wiring correct. LOL
@VacLab
6 ай бұрын
Best of luck!
All in all, it looks so much better now. It was just disgusting before!
@VacLab
4 жыл бұрын
It certainly smells better now as well. 😁
@rnbsteenstar
4 жыл бұрын
@@VacLab I'll bet it does!
Sir I really do appreciate your videos. The camera work is good, the content is great...but with respect the audio between comments it is distracting at best. Not your problem at all of course...but figured I'd mention it. Please feel free to ignore :)
@VacLab
Жыл бұрын
Do you realize that this video you are complaining about is more than 3 years old? 🤣
@jeremyfertig4187
Жыл бұрын
@@VacLab Not so much a complaint as a observation but thanks for the video in any case. Take care :)
I’m interested now of what this one will get on the airflow box since it dose have that different motor sounding to it
@VacLab
4 жыл бұрын
Airflow and suction video has just been posted. Enjoy!
@kg5vacuums205
4 жыл бұрын
VacLab I’ll check it out
Could you show where the wires attach too a friend took mine off to fix and didn't mark them so i need to do it myself
Great video
@VacLab
2 жыл бұрын
Thanks.
ohboy
vacuum the house with oreck xl21
@VacLab
4 жыл бұрын
I need to make a video of the handle repair and new brushroll installation first. Many more videos are coming using this machine. 👍
What kind of grease is best? I put a tiny amount of frog lube on a fan motor I cleaned and it smelled for a long time
@VacLab
3 жыл бұрын
For high speed bearings, Mobil EMB is hard to beat.
What grease do use on the Bearings that wont attract to much Dirt
@VacLab
2 жыл бұрын
Mobil EMB. You'll see it a lot in my repair videos.
I need help I took mine apart to clean it and now it doesn't work
@VacLab
10 ай бұрын
Soooooo, what kind of help do you think you can receive based on no appreciable info other than it doesn't work? 😁
How big is the case of it?
@VacLab
8 ай бұрын
The case? Not sure what you're referring to.
The ffttt
Do you sell parts?
@VacLab
4 жыл бұрын
Since I'm not a store, I don't sell parts.
@jodysmith6483
4 жыл бұрын
ok...thanks.
can you bill
@VacLab
4 жыл бұрын
Can I what?