No video

Operation of a steam loco, ATSF 1930's

Silent Santa Fe training film for beginning firemen and engineers.
Probably dates from the 1930's.

Пікірлер: 74

  • @BillSikes.
    @BillSikes.6 жыл бұрын

    I find it quite amazing how powerful the expansion effects of steam actually is, all this happens within a nano second, and to think a steam locomotive pulling a Multitude of carriages weighs in a several hundred tons, and some of them could travel at over 100mph... Simply incredible, and all thanks to the Humble H2o !

  • @RealJeep

    @RealJeep

    2 жыл бұрын

    Carriages?

  • @BillSikes.

    @BillSikes.

    2 жыл бұрын

    @@RealJeep Yes, they're what the locomotive actually pulls, some are made for passengers, and some are for freight

  • @DoubleMrE
    @DoubleMrE7 жыл бұрын

    This is a really excellent illustration of how the whole locomotive works. Thanks for posting!

  • @Man0fMeans
    @Man0fMeans6 жыл бұрын

    LOTS of animation. I loved it. Must have taken them quite a while to animate all those lines, arrows and piston rod movements.

  • @MonkeySpecs301
    @MonkeySpecs301 Жыл бұрын

    Best explanation on YT. Crazy to think this method of generating kinetic movement was discovered 200yrs ago.

  • @neildelaney5199
    @neildelaney51996 жыл бұрын

    now it all make's sense, thank you

  • @clausbachmann6568
    @clausbachmann65685 жыл бұрын

    Still of great value this time looking behind " the steel curtain". Thank you!!!

  • @herronrailvideo1169

    @herronrailvideo1169

    5 жыл бұрын

    You're welcome

  • @riomartinez7573
    @riomartinez75734 жыл бұрын

    thank you verry much

  • @hardchines
    @hardchines6 жыл бұрын

    now I understand all but how the reverse cycle works. but all very well done, 1930's quality!!

  • @OprichnikStyle

    @OprichnikStyle

    6 жыл бұрын

    the reverse stick (reach rod) changes the inclination of the arc. the rod goes up so making the movement the contrary from the start. and that's how you go on reverse ferropedia.es/mediawiki/index.php/Archivo:Walschaerts_motion.gif

  • @dejulesb974

    @dejulesb974

    3 жыл бұрын

    Iván Pstyga interesting I had the same question

  • @Yoni-G
    @Yoni-G6 жыл бұрын

    This video explains the procedure very well, despite the limitations of movie technology of the 1930s.

  • @EJP286CRSKW

    @EJP286CRSKW

    6 жыл бұрын

    Yonathan Gormezano Judging by the titling this was made in the early 1920s at latest.

  • @grill1234
    @grill12343 жыл бұрын

    Genius this valve. It’s like the 1800’s V-TEC

  • @Telecolor-in3cl
    @Telecolor-in3cl Жыл бұрын

    Never ever I could thought of some things.

  • @alphasigmasezon8597
    @alphasigmasezon85976 жыл бұрын

    Excelente

  • @maconmoore9916
    @maconmoore99166 жыл бұрын

    very good

  • @michaelnaisbitt1639
    @michaelnaisbitt16395 жыл бұрын

    The steam locomotive was no where near its full development when dieselization took hold. It could easily have been developed to the point of being as economic as diesels and still cost less to build

  • @kleetus92

    @kleetus92

    4 жыл бұрын

    I rather doubt that. Maintenance was the real headache.

  • @boog567
    @boog5676 жыл бұрын

    Didn't realize the boiler side of the firebox generated such a bigger proportion of total steam than compared to the flues. Also know now how some engineers could get so much more mileage than others. They were working that cutoff all the time for best efficiency. I know some engineers purposely ran with a lower water level to generate more steam, the more aggressive ones being the ones who usually blew the thing up. Have yet to find a video of a full size steam engine blowing up. Would be gruesome. Very good basic video.

  • @mauriciochivara9919

    @mauriciochivara9919

    4 жыл бұрын

    Visto en bogota colombia hoy 5 de febrero del 2020

  • @MrMacgyver55
    @MrMacgyver554 жыл бұрын

    the santa fe 4060 was build beetween 1921 and 1925, it's a Mikado. That's why the movie is silent.

  • @luisacosta1004
    @luisacosta1004 Жыл бұрын

    exelente. de esas toperas se pusieron acá en Argentina 🇦🇷 en una obra de renovación de una estación terminal. a mí entender se tendría que hacer la prueba con locomotoras, además de que esperaba que absorba más energía y ayude al frenado en caso de una emergencia. saludos. también se instalo de la otra marca RAWIE

  • @Visionery1
    @Visionery16 жыл бұрын

    Nice explanation, however, I'm still not quite clear on how the exhaust steam gets out of the cylinders and back into the smoke stack to exit the funnel.

  • @jeredhersh789

    @jeredhersh789

    6 жыл бұрын

    Visionery1 I think the exhaust steam leaves through the front and rear ends of the valve cylinder

  • @carlitosgy6

    @carlitosgy6

    6 жыл бұрын

    Jered Hersh they exit by the stack

  • @larrygall5831

    @larrygall5831

    5 жыл бұрын

    ​@@jeredhersh789 Sorry, I responded to the wrong post.

  • @larrygall5831

    @larrygall5831

    5 жыл бұрын

    Yes. If you look closely, you can see the exhaust steam (outline arrows) is curling up and disappearing through the exhaust port that can't be seen. It's channeled up past the same path it came down through the smoke box and through a nozzle.. making the chuff sound, while helping to push the smoke through as well. By doing that it also sucks air in at the firebox, preventing the smoke from suffocating the engineer, and making sure there's enough air to burn the fuel in the process. I'm no rail expert, but I understood this well. Fascinating to watch this.

  • @jeredhersh789

    @jeredhersh789

    5 жыл бұрын

    Ah, it's ok. Good explanation, too

  • @RichardAndewSwayne
    @RichardAndewSwayne8 жыл бұрын

    Mikado built in 1924

  • @OprichnikStyle
    @OprichnikStyle6 жыл бұрын

    the cut-off of the cylinder is controled from the cab? besides the expansion on the cylinder, what other difference does it make into the aceleration? does it behaves like the gears on any other vehicule?

  • @thomasdupee1440

    @thomasdupee1440

    6 жыл бұрын

    Iván Pstyga Not like gears at all. Shortening the valve stroke (aka cut off) by means of adjusting the reverse lever towards the center of the quadrant, results in less volume of steam entering the cylinders. This reduced volume is sufficient to power the piston stroke by steam expansion. This also means that there is less steam volume which needs to be eliminated on the exhaust side, reducing back pressure. The expansion, plus the reduced back pressure, allows acceleration.

  • @OprichnikStyle

    @OprichnikStyle

    6 жыл бұрын

    thanks for the quickly reply. Let me try to get it straight so getting the Lifting Arm nearer the center results in a quickly cut-off thus less steam in the cylinder, a slower acceleration. what confuses me on your comment is the back pressure: Given a low cut-off (slower -I think-) gives in return less back pressure, now, where exactly is the back pressure? and how does it affect. Thanks illuminating me.

  • @thomasdupee1440

    @thomasdupee1440

    6 жыл бұрын

    Iván Pstyga It's difficult to visualize by reading text, but quicker cut off allows faster acceleration, not slower. Longer valve travel is necessary during starting and until the steam chamber and cylinders get hot enough to prevent condensation. As speed increases, cut off is adjusted by moving the reverse lever towards center. Back pressure is always present on the back side of the piston during the exhaust process as the exhaust steam moves toward the stack. The less steam volume that is used to push the piston, the less steam volume has to be exhausted.

  • @OprichnikStyle

    @OprichnikStyle

    6 жыл бұрын

    yeah now I get it visualized i had to connect what you said about the cut-off and another video i saw that he opened a valve to let the condensed water get out of the piston before opening the steam valve. This is most helpful now i get into helping repair the Neilson & C° N°11 a 2-6-0 locomotive

  • @thomasdupee1440

    @thomasdupee1440

    6 жыл бұрын

    Iván Pstyga The valves that are opened to allow the venting of condensation are known as "cylinder cocks" and are separate from the normal exhaust system.

  • @timb393
    @timb3937 жыл бұрын

    like it reason educational.

  • @wilfark4345

    @wilfark4345

    7 жыл бұрын

    Tim B to

  • @timb393

    @timb393

    7 жыл бұрын

    old tech and new tech help to improve etc.

  • @sludge-en9on
    @sludge-en9on6 жыл бұрын

    wow cool old animation

  • @mateusaparecido5803

    @mateusaparecido5803

    6 жыл бұрын

    nick cĺaserma váĺgtm

  • @mateusaparecido5803

    @mateusaparecido5803

    6 жыл бұрын

    Ñū

  • @mateusaparecido5803

    @mateusaparecido5803

    6 жыл бұрын

    nick casermaķūj 0oöop0 8ïūūimkkkkmmm

  • @rigidfinger
    @rigidfinger6 жыл бұрын

    I'ma thinking this was before the invention of sound.

  • @herronrailvideo1169

    @herronrailvideo1169

    6 жыл бұрын

    Most likely, it was.

  • @stabilini
    @stabilini7 жыл бұрын

    where's the piano?

  • @MarttiSuomivuori

    @MarttiSuomivuori

    6 жыл бұрын

    They shot him! Thank you!

  • @ch.roughhabit5002

    @ch.roughhabit5002

    6 жыл бұрын

    Nicolas Stabilini and where is rooster ?

  • @jimspry7433
    @jimspry74336 жыл бұрын

    so the reason is diecel is much cheaper but if the fire box was run by air fuel like propane ,It has been proven that if we ran our cars on gas fumes instead of gas liquid we would get maybe 150--------------------200 miles to a gallon , Would the same thery work in a steam engine?

  • @SBCBears

    @SBCBears

    6 жыл бұрын

    Not practical. Propane, for example, contains too little energy for a given volume to power a steam engine. It could drive a steam engine, but you would have to burn so much propane that you would have a problem storing it aboard the train. The same is true for cars and trucks. Propane is okay for short trips and where you can get frequent refills, not for heavy applications or long trips.

  • @jacksalvin364
    @jacksalvin3643 жыл бұрын

    When Steam was king.

  • @hardknott
    @hardknott3 жыл бұрын

    Why is their no sound?

  • @herronrailvideo1169

    @herronrailvideo1169

    3 жыл бұрын

    Because it is a silent film, as originally made. Did you mean to ask, Why is THERE no sound?

  • @frankfreeman1444
    @frankfreeman1444 Жыл бұрын

    What happened to the narration?

  • @herronrailvideo1169

    @herronrailvideo1169

    Жыл бұрын

    This is a silent film. There is no narration.

  • @michaelrichter8973
    @michaelrichter89736 жыл бұрын

    My dad worked on the rest ,b&o,back when they still had steam engines in service said he liked them over the new diesels!He said he hated diesels for thier exhaust fumes in those days was so rich with unburned diesel fuel it would give him a stomach aceh ,and the hi pitched noise from the generators would deafen you ! I don't know myself but he quit to work in the coal mines,witch he said wasn't to good either so he started his own mining company.,he ran those untill a stable over releasing mine water he went to court and won his case saying he could put in treatment ponds but then lost his order for coal sales to the Elizabeth coke works then he started a sawmill,this fared no better as his partner embezzeled money from the co. Untill he quit that as well then he worked on construction as a carpenter untill retirement ,but boy he tried good rest his soul ,!I often wonder if us five children may have had it better if he succeeded in his many I'll fated buissness attempts! Life go figure !?

  • @boog567

    @boog567

    6 жыл бұрын

    Your Dad was a hard working Saint. Bless him

  • @joachimsingh2929
    @joachimsingh29292 жыл бұрын

    This video is Loco bro.

  • @sonnypruitt6639
    @sonnypruitt66397 жыл бұрын

    No sound, no choo choo

  • @herronrailvideo1169

    @herronrailvideo1169

    7 жыл бұрын

    The original film by ATSF is silent. It is shown here as intended by the railroad.

  • @robadams8057

    @robadams8057

    6 жыл бұрын

    I thought it was just me. This video is pretty useless without narration.

  • @bweldon13

    @bweldon13

    6 жыл бұрын

    no such thing as ‘’choo choo’’

  • @MidKnightKid98

    @MidKnightKid98

    5 жыл бұрын

    When you get no sound so you go mad scientist, turn up and down the volume, plug in and unplug your headphones, open SoundAbout app and change media audio to headphones and back to speaker again, turn the app off then on again, deactivate SmartConnect, and finally smack the phone and jiggle your headphone wire only to read the comment section and find the video has no audio... -.- (My phone's a Xperia Z5 Premium with an audio defect. New audio port and soundboard replacement. Doesn't send audio out the speaker or headphones unless forced to because they never had my password to gain access to the phone and setup the new driver. Have an app that does it for me every time I use it. I truely thought my phone was giving me atitude again... Pretty funny actually.)

  • @mjperrin3819
    @mjperrin38198 жыл бұрын

    No sound here.

  • @herronrailvideo1169

    @herronrailvideo1169

    8 жыл бұрын

    +MJ Perrin The original film is silent.

  • @johnvincentmalilaytesta5072
    @johnvincentmalilaytesta50722 жыл бұрын

    #HerronRailVideo

  • @dickJohnsonpeter
    @dickJohnsonpeter4 жыл бұрын

    Chugga Chugga Chugga Chugga Poopoo! PooooooPooooooooooo!