So this is what millions of people want to achieve. You are the best!

You helped me simply and directly! You're the BEST! Thank you!

Your tutorials are a LIFESAVER! I don't have hardwire Ethernet by my router, but I have WiFi. I needed Ethernet and better signal, this tutorial was exactly what I needed! I also watched your Guest Network video, it was also outstandingly helpful. If I could sub to you twice I would!

@VanTechCorner

2 жыл бұрын

Glad that the video helps. If you have 2 OpenWRT routers, you can set up Mesh WiFi network for a better connection and higher throughput. You can find the video here kzread.info/dash/bejne/lats282El7mxkrA.html

@interestingstuff4217

2 жыл бұрын

​@@VanTechCorner Thank you for responding to my comment. I do not have two OpenWRT routers (I have the TP-LINK AC1750 and AX3000 as my routers.) Do you know if I can achieve higher speeds without changing the firmware? Thank you so much for your help and time, again, your videos have saved me so much time and energy setting OpenWRT up, highest level of appreciation. It really means so much having this content freely and easily accessible. The effort you put into your content really shines through in your videos. Amazing job, keep it up!

Excellent video. Very well explained. I'm new to OpenWRT and I'm very impressed with it's feature set.

@VanTechCorner

Жыл бұрын

Glad it was helpful!

Good job man! I was trying to help a friend with a temporary hot spot that had no lan port. My mistake factory resetting the openwrt to factory settings. Had to connect it to my internet to download and install the relayd packages.

This is really useful. Thanks!

Really well done. Thanks!

Very good and excellent video it works great! Thank you very much for your knowledge sharing!

cảm ơn bạn nhờ video của bạn mà mình biết cấu hình openwrt

Thanks

Thêm phụ đề hoặc làm content Tiếng Việt đi ông. Ông nói Tiếng Anh tui hổng nghe nổi. Chứ nội dung ông làm thì tui thấy quá ổn. Tui cũng biết thêm nhờ ông. Cám ơn ông!

@VanTechCorner

3 жыл бұрын

Cũng muốn lắm mà không có thời gian bạn ơi. Một tuần đi làm 5 ngày, 2 ngày cuối tuần rãnh rỗi mới làm cái này cái kia chia sẻ mọi người mà thấy sắp hết ngày rồi, làm thêm sub nữa thì hơi vất vã :D

"... and if you don't like it hit the thumb down and tell the reason." This sentence alone is already enough reason to press the thumb up button 😄

Hi. Thanks for your tutorial! I just want to ask if will this extend my wifi signal also? I don't think mine works if I'm trying thru wifi, however it will work if I plug a lan cable to my pc.

😊

I do step-by-step flows in your tutorial, it's awesome, but I have a problem, the connection wifi can't get IP from AP client. Thanks for your help.

@phantanh

4 ай бұрын

Vẫn để LAN là DHCP tĩnh, thì các máy con (client) phải tự set IP tĩnh thì mới truy cập AP được

I have tried and it works. But after I plugged the lan cable into the router (I moved the lan cable from the PC to the router), the connection dropped by around 70%. what's wrong?

Is there a way to set up exactly what you did here, but instead leave DHCP on for the second router and have 2 separate networks that can communicate openly with eachother?

Hi, I was successfully able to set up this lan to lan bridge. I have a 3rd router. Can I bridge it with the 2nd router using the same method?

Does the second router also extend/broadcast/strengthen the wifi signal from the first router? Is this tutorial meant for that? I did all steps and all the clients connected to LAN ports of the extender router are connected to internet. But i was expecting wifi also will be extended. Am i wrong?

@VanTechCorner

2 жыл бұрын

Nope, this is WiFi bridge/LAN to LAN repeater, the 1st router & 2nd router will be in the same LAN after setup. To extend your WiFi signal, you can simply configure Wireless client & create another wireless network to extend that. This video will somehow help to explain that kzread.info/dash/bejne/iIxmsruzd7DUpMY.html

"The Wifi bridge can be managed through its static wwan IP address (eg. 192.168.1.30) " says OpenWrt wiki. In your case its 192.168.8.5

Hi, I love your channel. i have a little problem I have tried to create the repeater but I can't get the devices to see each other for example if I want to send some video (for example) from router 2 (repeater) to router 1 (main) these are not found In router 2 I have openwrt to the latest version and if I disable the dhcp of this mo I have internet. please help

Since you are using 5G wifi for repeater mode, you cannot use the built-in 5G wifi right? I've tried it and I can't detect the 5G wifi even though it's enabled

Can this device LiteBeam 5AC AirMAX 23 be setup this way

Thank you for your tutorial. But how do I find out whether I am connected to the main router or to the repeater router? Thank you

@VanTechCorner

Жыл бұрын

By checking the Signal Strength of the Phone or PC, you will know that (compare the signal when the wifi bridge router turn on and off)

I have problem with the mesh setting. So, try this. But my speed is low, 40~50mbps compare to mesh configuration. Any idea why? Btw, I notice that in wwan, there is Device: unspecified. Should I change?

@VanTechCorner

2 жыл бұрын

There is certain limitations when using WiFi Bridge. If you don't need mesh, you can try to setup AP Client - this can be found in the OpenWRT playlist.

@Austin-jy9me

2 жыл бұрын

It’s could be a Miss configuration mine did the same thing and was able to fix it

hello need some help we have a radius server with enterprise security that we use for wifi authentication and we use username and passwords to connect to our network. so what password/passphrase sould i enter at 4:00 ?

I couldn’t get this to work man. There is no internet connection after I change the relay interface to 192.168.1.5 (outside of the range). Very upsetting! I am not sure what is wrong. Looks like I’ll just have to live with repeater outside of the range..

@VanTechCorner

3 жыл бұрын

Hey, can you share the time in the video where it goes wrong. Are you able to ping the AP once the AP client connection established?

I don't understand the purpose of the bridge. I mean, when you connected to the AP and disabled DHCP on a right router your laptop already got connected to the 192.168.8.x network.

Hi sir..can u show me how to setup wifi to lan extender and run vpn like xvpn between that. Example : i connect office wifi using openwrt device + run vpn in that device and trasmite to user using lan.

@VanTechCorner

3 жыл бұрын

Hi, you can setup "AP client" and then "OpenVPN client" or "Wireguard client" on the router. All of the videos can be found in this playlist. kzread.info/head/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

@darxniq

3 жыл бұрын

@@VanTechCorner orait. I will try. Tq

With this setup i get around 7 replies followed by 2 timeout. I tested this with an RPi 3 and 4. Any suggestions?

@VanTechCorner

2 жыл бұрын

Hi, wifi replay is the last thing to setup to extend your LAN over WiFi, if the device doesn’t support Mesh WiFi. - Raspberry Pi’s wireless perfomance/coverage is not good, it is only testing/development usage. - You can buy a USB wifi adapter (with antenna) to improve this; however, with this cost, you can buy 2 used router, install OpenWRT on it and configure mesh WiFi (802.11s)

@stefanwels1871

2 жыл бұрын

@@VanTechCorner it is just for a LAN printer I wanted to connect via wifi.

very good tutorial Thx but how to change IP for "Home router" or how to change routing that we can connect to 192.168.1.1 from 192.168.8.x network ? (i want to open 192.168.1.1 without manual chane IP address od network adapter)

@VanTechCorner

2 жыл бұрын

You can't do it with WiFi brdige. If you want to be able to extend the WiFi range with OpenWRT routers, you can try to setup Mesh WiFi and you should be able to reach the LAN gateway. Here is the tutorial link kzread.info/dash/bejne/lats282El7mxkrA.html

hello dear, i love all your videos about openwrt. The following happens to me: I have a 3g router with openwrt and I want to put it in repeater mode with my main router, I have done it as in your video (even putting the same ips) but what I notice is that the repeater constantly disconnects and sometimes the Wi-Fi of the repeater router does not appear and the speed drops a lot, almost to 0. I hope you can help me. a greeting.

@VanTechCorner

Жыл бұрын

Hi, this seems like a complicated case. I will need the network diagram and what is the device you have as well as the network configuration files in order to help. You can create a post in the Van Tech Corner & Friends group on FB and we will troubleshoot there.

DNS requests all timed out after setting WiFi bridging. Solved by removing the "dnsmasq" package.

7:32 There is NO option "relay bridge" How tf am I supposed to choose the option, when there is no option called "relay bridge"???

@dveith00

10 ай бұрын

reboot

I made raspberrypi the relay between wwan(usb0 firewal wan) and eth-br(eth0 wlan0 firewall lan) ip192.168.32.2, wwan( device usb0 -has its own dhcp server 100-150, I made connection static ip 192.168.32.100 gtw 192.168.32.1) lan-br ip 192.168.10.1 (eth0 and wlan0) . It when lan or wifi is connected they not get ip from 192.168.32.x from dhcp. when usb0 is as dhcp client it get random ip 192.168.32.1xy but it others not get this subnet ip. When I connect computer to lan-br and manually set computer ip to 192.168.32.101 gtw 192.168.32.1 then it this computer is able to access internet. strange thing : I was connected to wlan0 via phone before making relay config it got 192.168.10.9 ip when lan-br had dhcp enabled, but it when now relay is enabled and lan-br dhcp disabled this phone in web openwrt wireless client list is showed as 192.168.10.9 while other computer gets garbage non working ip unless I put in manually 192.168.32.101 then it computer have internet.

Hi, I was successfully able to set up this lan to lan bridge. I have a 3rd router. Can I bridge it with the 2nd router using the same method?

@VanTechCorner

3 ай бұрын

Hi, if all of the devices run OpenWrt, you better setup Mesh to have a better connection