Sehr gut! Ich freue mich auf jeden andere Video! ❤️‍🔥❤️‍🔥❤️‍🔥

your tools upgrade are art to my eyes!!!!!! craftmanship is incredible thx again and again

Very nice! I for one would not go thru all that trouble to make that. I would just buy a upgraded one but it was great watching the whole video.

For this project I got circular saw and some wood. Thats it. So mission impossible! Thanks for the video!

Like te see the construction of your practical Router mini table you used , loved

Thanks a lot for the video. I also have a dewalt table saw and the miter gauge is an absolute joke. Can't believe a high-quality saw like that comes equipped with that gauge with so much play and without any precision. Definitely you took care of all those problems.

Signed Brother Carpenter!!! 👍👍👍

a tip for milling a T-slot: I take a groove cutter with the appropriate width (e.g. 8 mm for M8) and use it to mill a groove and then use the appropriate T groove cutter to mill the T groove. This is how you protect your T-groove cutter of the smaller dimensions with which you have pre-milled.

@TravisKlein1

Жыл бұрын

which is what he did

당신이 가진 기술은 매우 매력적입니다 my boss

excellent well done. Suppliers could learn from this

I just found your channel and you’re amazing. Thanks for inspiring people with your gift. It really is fun to watch and even funnier to learn 👍👌👍

Nice work

Another amazing build. Keep them coming!

Muy Buen Video. *¡¡¡ BUEN TRABAJO !!!*

Hello, no doubt about it, you are great, ideas and professionalism at the top compliments.

Very nice! One suggestion: when you cut a key groove, make a dado before you run it through the router with the keyhole bit. it will run easier, and less stress on the tool and bit.

@carpentak

2 жыл бұрын

That's a good suggestion. Thank you very much friend

Very skill and talented. Keep up the good work. Luv ur video

A true craftsman, awesome

Top. Super 😃👌

Love it 😎

Muito bom, parabéns.👍

Beautiful work!

Замечательно получилось! 👏👍 Однако, сначала купим дрянь, потом приложим "золотые" руки, страдание, опыт, тогда получим хорошо работающую штуку... Вместо того, чтобы делать красивые, хорошие изделия!

Thật tuyệt vời chuẩn không cần chỉnh OK

Matias Lucena 26 de Abril de 2022 já ativando o sino é muito bom um belo trabalho feito com esmero oficina limpa, parabéns e DEUS o abençoe.

Parabéns. Vou tentar fazer pra minha serra.

Fantástico , Very good, Brasil 🇧🇷

Nice job

Very complicated. But good job.

I wish I could have a tool like this

very good idea and execution, can you make a list of tools you used.?

👍😀👏👏

Молодец!!!

Muiiiito bom nota 10 para seu trabalho, parabéns

very cool and nice job. Most people would just buy one, but you made it just your own. Gives you more satisfaction ;-) Just subscribed :)

Really like your video 😊, could you please annotate .

잘봤습니다. 좋아요~^^ 구독

크...가지고싶군요ㅋㅋ 제것도 흔들려서 안쓰고있는데ㅋㅋ

👍👍👍

同型の機械を持ってます。早速作ってみます。

What make is your drill press and the chuck, as it looks a nice size drill chuck. Thanks if you can share that information. Very clever designs. You are obviously a tool maker by what i see as i was years ago, now i am building my own woodshop and ideas are appreciated Thanks for sharing

@carpentak

Жыл бұрын

a.co/d/hTl27oZ This link is what I found on Amazon for something similar to mine. You must purchase according to the specifications of your drill press.

@monk1100

Жыл бұрын

@@carpentak what pillar drill are you using was my first question and thanks for the links friend

@carpentak

Жыл бұрын

Oh now i know, sorry. Drill press model is REXON DP2501A.

@monk1100

Жыл бұрын

@@carpentak ok many thanks for sharing whats your opinion of it, is it accurate does it run true 👍

@carpentak

Жыл бұрын

This product is made in China. The price is attractive, but the precision is lacking. I had to do some work to make the 90 degree angle. If you are on a budget I recommend a better model.

Please link the guide bar with the wheels. Thank you.

@carpentak

2 жыл бұрын

a.aliexpress.com/_mLWdone

hallo Carpen, wie saugst du ab damit deine Dewalt selbst ohne Absaugung am Sägeblatt so unglaublich staubfrei arbeitet. hello Carpen, how do you vacuum so that your Dewalt works so incredibly dust-free even without suction on the saw blade.

@carpentak

Жыл бұрын

hello. I didn't do anything special with the table saw. I just use a plain 1 hp dust collector. thank you

The flex in the angle stop is a bit worrying.

Look my Parallel Guided Power Saw.

👍

Have you heard of Banggood?

@carpentak

Жыл бұрын

You mean banggood.com? If so, I know.

Как этот инструмент называется

C'est très bien , mais où trouver le guide réglable?

@carpentak

2 жыл бұрын

제가 다 만들었어요~ 영상에 다 나오니 영상을 다 봐주세요.

@mingueyox

Жыл бұрын

@@carpentak I suppose he meant to ask where to buy the replacement adjustable miter bar. Excellent idea and great work 👍

👍👍👍👍

dw7492 나오기 직전에 dw745 구입했는데 ㅠㅠ 마이터게이지 클라스가 다르네요

Ça onvent à combien

Where can I buy one of this?

@carpentak

Жыл бұрын

I am not selling this. If you want this you have to make it yourself. Of course, you can find other finished and good quality miter gauges on the market.

Le problème c'est qu'il y a du jeu dans le barre de guidage !!

Where and how can I get a Dewalt Mitre gauge like that?

@carpentak

Жыл бұрын

You have to make it like me. hh thanks!

You really got to stop wearing gloves when using drill press!! Many years ago I witnessed a young gal get her hand wrapped up and literally pulled her thumb off while wearing gloves on a drill press.

@carpentak

2 жыл бұрын

ok I'll be careful. thanks

can you give me a link to buy that dewalt accesory please.. thank

@carpentak

2 жыл бұрын

I'm not sure what accessory you're talking about. If you're talking about sliding miter bars, this is it. All other parts were made by me a.aliexpress.com/_mMXGu9a

Mutta se on erittäin vaikeaa.

Вопрос-какой сорт дерева Вы используете?

@carpentak

2 жыл бұрын

손잡이는 월넛, 베이스는 멀바우 입니다.

15:43 HEHEHEH!😁

This is how the Bosch gts 10 xc is made. You don't have to do it yourself at home.

@michaelbaykara2322

2 жыл бұрын

making has more value than buying

@mrjasonbarnes

2 жыл бұрын

@@michaelbaykara2322 Couldn't agree more... it's something about building something yourself and appreciating the quality of work!

@hundredhats

2 жыл бұрын

Unfortunately its equally bad. About a million vids about fixing bosch issues...

where did you bought the rail

@carpentak

2 жыл бұрын

ali express~~

@gaetantinguely4632

2 жыл бұрын

@@carpentak tanks do you have de reference

ㅅㅂ... 해보려고 들어왔는데 엄두도 못 내겠네

Woher bekomme ich diese einstellbaren alu schinen?

@carpentak

2 жыл бұрын

Ich bin mir nicht sicher, was Ihre Frage ist. Die Aluminiumteile in diesem Video wurden von mir selbst bearbeitet und hergestellt. Im Video ist alles enthalten. Danke schön

@user-iq5yv1px6k

2 жыл бұрын

영상 어디에도 알루미늄 레일을 폭에 맞게 직접 가공하는 부분은 없군요. 기성품인가요

가격이 얼마인가요

@carpentak

Жыл бұрын

아 저는 판매는 하지 않습니다.

👍🤟🤞🖐️👉

혹시 판매는 안하시는지?😅

@carpentak

2 жыл бұрын

아니요 판매는 못합니다.

판매도 하시나요

@carpentak

2 жыл бұрын

아니요 판매는 하지 않아요^^;

저도 얼마전에 7492샀는데 날떨림 없나요??

@carpentak

2 жыл бұрын

네 처음에 날떨림은 심하지 않은데 리빙나이프는 떨림이 좀 있었습니다. 리빙나이프를 짧게 잘라내고 톱날도 좋은것으로 바꾸었더니 좀 나은것 같습니다.

@sehokim6493

2 жыл бұрын

@@carpentak 감사합니다 아직 시험 가동을 못해봐서요 ㅠㅠㅠ

Way too much effort requiring way to many shop tools. Just buy a decent mitre gauge. The track is standard channel which will accept them.

A great idea and a very well executed project. Unfortunately I couldn't watch the whole video because I found the mime like behavior of the finger shaking and thumbs up and thumbs down to be the height of stupidity and in fact to make a mockery of our craft. You have a voice. Use it.

@TravisKlein1

Жыл бұрын

he's not great at english, we would rather him focus on teaching us woodworking than perfecting a foreign language

@vidpromjm

Жыл бұрын

Height of stupidity would be criticizing an amazing contributor whilst providing nothing of value yourself. Though at one stage when he was making strange noises it reminded me of a Mr Bean video.😁

I hate these no talk videos.