▼ *Omnidesk* (affiliate link): bit.ly/3bkD4pA ▼ Discount code: Shawnkoh ($15 off) ▼ *SecretLab Gaming Chair* (affiliate link): bit.ly/38eIocv My 2020 Dream Desk Setup video is up now! Go check it out! kzread.info/dash/bejne/aYB2l5aOfrK6drw.html

Seriously, you deserve more likes and views! Great review with all the details that are helpful for consumers.

@ShawnKoh

4 жыл бұрын

Cheers! and thank you for those kind words! I'm glad I could help :)

Amazing production quality for such a small channel. Looking forward to seeing more content.

@ShawnKoh

4 жыл бұрын

Thanks you so much for the support!

Impressive production quality Shawn ! Thanks for the setup video

@ShawnKoh

3 жыл бұрын

Thanks! I’m glad you enjoyed it!!

Really great video, helpfull in my decision to save up for one now. Thanks mate, keep it going 👍

@ShawnKoh

4 жыл бұрын

Glad I could help! Thanks for the support!

Thanks for the review - it was really informative. Keep that good work going!

@ShawnKoh

3 жыл бұрын

Thank you for the support! Glad you enjoyed it :)

Nice speakers. Have had and been using the same ones for 13 years straight now! Never doubt bose for quality and endurance

@ShawnKoh

2 жыл бұрын

Yeah absolutely, been thinking of changing but I can't find a good reason to change hahaha, Bose is really lasting!

Great video dude! Been considering getting one for awhile. Will hopefully purchase one tomorrow 😬

@ShawnKoh

4 жыл бұрын

Hey thanks! Glad you enjoyed it, hopefully it helps with your decision, definitely not a small sum of money so be very sure before you buy :) Thanks for the support once again!

This was fantastic. Thank you

@ShawnKoh

Жыл бұрын

Cheers!

just setup my own omnidesk and man I think I just broke my back. amen for your video to guide me through.

@ShawnKoh

2 жыл бұрын

Awesome! Glad I could help!

Thanks mate, just built mine…perfect!

@ShawnKoh

3 ай бұрын

Glad it helped

@daveb6345

3 ай бұрын

@@ShawnKoh It certainly did and what an awesome desk.

Nice review thanks

@ShawnKoh

4 жыл бұрын

Thank you! Im glad you enjoyed it :)

Nice review for potential buyers of the desk!

@ShawnKoh

4 жыл бұрын

Thanks! I’m glad you enjoyed it!

I'll be watching your video again. Thinking of buying one.

@ShawnKoh

2 жыл бұрын

Cheers and thanks for the support! remember to use my affiliate link if u decide to buy!

Great review :) Nice and smooth photography too. I noticed that the desk appeared to be a bit shaky when you wobbled it. As I’m considering this desk for gaming - and mounting some joysticks + a throttle to it - I’m not sure if it’ll stand up to the movement.

@ShawnKoh

3 жыл бұрын

Hey James! Thanks for the comment. As for the shaking, I’m sure all tables shake to a certain extent, but honestly its no different from a normal table, it also depends on the weight u have on the table. Too much weight and the wobble sways more often :) hope this helps! Do consider using my affiliate link if you intend to purchase:)

very helpful, just ordered the desk

@ShawnKoh

3 жыл бұрын

Im glad I could help! hopefully you used my affiliate hahah but nevertheless do enjoy your new table!

@ve5394

3 жыл бұрын

I wish I ordered via your link. I ordered the desk first and then found your link. But if my friends want the same desk, I will give your link to them. We live in Australia, is your link works?

@ve5394

3 жыл бұрын

Your video provided a very clear step by step process. I am sure others really value your time and effort 🙏

@ShawnKoh

3 жыл бұрын

I think it does work internationally haha thanks for the support!

Good review buddy.. great to see how a fellow KZreadr does reviews

@ShawnKoh

3 жыл бұрын

Thanks! I’m glad you enjoyed it!

@kttravelphotography

3 жыл бұрын

@@ShawnKoh your video saved me $100 by gaining confidence to install on my own.. Btw please visit and subscribe my channel.. just started and long way to go

WTF, im watching this like this guy is really good I was just focusing on the vid and no likes or views, At the end of this I look down and see 20 likes and 1.18k subs like wtf this guy is so good and you can tell he puts a lot of effort in his videos how have you not blown up yet?

@ShawnKoh

4 жыл бұрын

Hahaha thank you for those kind words! Really appreciate your support! It's hard to make it big in KZread, I just make these videos out of passion :)

Really good video there!

@ShawnKoh

3 жыл бұрын

Thanks!

Why do you have so little subs? Impressive stuff Shawn!

@ShawnKoh

3 жыл бұрын

Thanks for the support!

legend shawn! thanks

@ShawnKoh

3 жыл бұрын

Hey! haha thanks for the praises! Glad you liked it!

This video was really well made! More companies should be sponsoring you man

@ShawnKoh

4 жыл бұрын

Hey thanks!! Yeah I’m always open to collabs with companies to share about their products :) thanks for the support!

excellent video 👍

@ShawnKoh

2 жыл бұрын

Thanks! Glad you enjoyed it!

Great review! Just a quick question. They have a powder coat finish option for this desk, does your desk have this? I cant find anyone talking about it and have questions, like what is the difference between a normal desk vs the powder coated one and how would the powder coating feel on my arm vs the normal one. Thx!

Great video! What is that headphone jack that you've installed at the front of the desk? Seems super handy as I HATE having my headphone cable on top of the desk.

@ShawnKoh

2 жыл бұрын

Its actually the volume control knob from the Bose Companion 5 :)

Great quality video mate, you deserve more subs and views. Ordered my wood finish XL desk today, looking forward to getting it up and running.

@ShawnKoh

3 жыл бұрын

Cheers! I'm glad you liked the video! Hope you enjoy your new desk! I'm kinda jealous of the new wood finishes hahaha

Awesome review. I was wondering about the PC mount, did you get the omnidesk one, and how have you found it? Thanks

@ShawnKoh

4 жыл бұрын

I bought it separately online as it was cheaper :) The model is the same Universal Pc Case Holder Under Desk Wall Side Cpu Stand Adjustable Computer Mainframe Hanger Host Box Stand Bracket Rack Gd08 s.lazada.sg/s.JwBB

Good review. Got to ask you if you think wood collection series is any better than the one you got because the surface type you bought was easily scratched. Also, are you using the 60” version, if so, do you feel it’s slightly big?

@ShawnKoh

4 жыл бұрын

Hey there, Previously I had a timber top for my desk, I didn't really like it cause it didnt feel real. I've not tried the Omnidesk timber top, but that's something to consider. Using timber tops have advantages and disadvantages as well, if you get real wood, it requires maintenance and regular coatings, if you get laminates or veneers, they might feel fake but require less maintenance. For the size of the table, I think 60 is just the right size. Thanks for the support!

Great informative review! May I ask where did you bought your arm chair from? I've been looking for a good full mesh chair for a long time now

@ShawnKoh

3 жыл бұрын

Thanks! Glad you likes the video! To be honest I don’t know what the brand of that chair is, there was no brand on it :) haha

@michellelim7280

3 жыл бұрын

Thanks for the reply Shawn. The search continues i guess... haha :)

Great video Shawn. Quick question, is there enough space to seamlessly put a power bar inside the cable management system?

@ShawnKoh

3 жыл бұрын

Thanks for the comment! Glad you enjoyed the vid. It really depends on the amount of power plugs u gonna put into the bar, if it’s too chunky it might not fit into the management system.

@Jacob-lx2ok

3 жыл бұрын

@@ShawnKoh It would be so helpful if you can provide the height measurement of the entry point (not sure side or front). Sorry to trouble!

I like to know more about that arm that holds your mic. Is it strong enough to hold a mirrorless camera like the a7iii or a6500?

@ShawnKoh

4 жыл бұрын

Glad you asked that question! And yes! I have a 2nd arm that holds my Sony A6400 when I stream. That arm is the Rode PSA-1, it costs about SGD150 which is about USD99. Its worth the investment as compared to cheaper weaker ones.

@Shawn which size of the desktop you brought?

Great video. I order mine and realised that there isn’t screwholes for my cable management bar. Did you drill it yourself?

@ShawnKoh

2 жыл бұрын

I cant recall, this was afew years ago but even if there arn’t holes u can do some pre-drilling and just use the wood tapping screws.

Hi there! Thanks for the informative video. Im interested in getting 1 myself with similar specs as yours (60 inch). As i will also be getting the pc mount as well, I was worried if the displayport cable from the pc to the monitors may not be longer enough. Can you advise how long should the cable be? And do I need to leave some slack so that the table can elevate and depress without issues? Thanks!

@ShawnKoh

3 жыл бұрын

Hey Fazen, Since you are getting the PC mount, the cable doesn't need to be super long, the typical cable length (1-1.5m) is sufficient. You dont need to leave slack for the rising and lowering of the table because ur monitor is mounted onto your desk, so it travels with the height of the table. But if you are going to route it under the table and organize ur cables, I would suggest a longer cable. For myself I bought a 3m cable, which was more than enough for me to comfortably manager my cables and still have enough slack leftover. You can check out my other video kzread.info/dash/bejne/aYB2l5aOfrK6drw.html where I show abit of my cable management. Thanks for the comments and I hope you enjoy your table! Do consider using my affiliate link when you order to support my channel :) ▼ Omnidesk (affiliate link): bit.ly/3bkD4pA ▼ Discount code: Shawnkoh ($15 off)

Hey Shawn, did you get the omnidesk PC mount for your tower? If not, what are you using? Cheers

@ShawnKoh

3 жыл бұрын

Hey, i’ve replied to this question before, you might wanna scroll down to find that discussion :)

Hi Shawn! Just curious, do you need an extra tool to assemble the table? Or the tool that is provided by them suffice

@ShawnKoh

Жыл бұрын

You'll need your own phillips head screw driver, the allen keys are provided.

Nice video! I wonder if you need a drill or screwdriver for assembling?

@ShawnKoh

4 жыл бұрын

well I'd say a small hand drill for some screws would be ideal. Other than that you can totally use your hands :)

Hi good review, did the headphone hanger came with the table as i don't see them selling this on their website?

@ShawnKoh

2 жыл бұрын

Nope, its not from the same brand.

Did you by any chance compare the Omnidesk to ErgoEdge before your purchase? And if so what led to Omnidesk over the ErgoEdge? Thanks!

@ShawnKoh

4 жыл бұрын

Hey there, unfortunately I did not purchase the other branded table. So i cannot compare them.

Hi man, do you have a link where I can buy those monitor arms you have? Dope setup!

@ShawnKoh

4 жыл бұрын

Hey I just posted a video of all the items on the desk, have a look and check the descriptions for the link :)

Nice all black assemble. How do you find the value of the table? A little apprehensive coz of the price. Do you find 60” too big?

@ShawnKoh

4 жыл бұрын

Hey! Thanks for the support. 60” is just right in my opinion. The next size is 72” which might be too big.

easy way to fix scratch is to wet cloth with acetone/nail polish remover and then wipe scratch with wet (not damp, not spritzd,) wet cloth. acetone softens powdercoat and can help in covering scatches .

@ShawnKoh

Жыл бұрын

Cool

Good review content. Shawn, how do you mount the Fujitsu powerbar to the table? by drilling hole or some 3M sort of adhesive tape?

@SingleLifeSG

3 жыл бұрын

I see comment in other video. 3M’s Dual Lock “velcro” tapes. Sorry non tech question, you use 2 tapes, 1 adhesive side attach to table the other tape attach to powerbar, move the powerbar anytime and snap it back to table as when needed? Is it work it this way? Is it strong enough to hold the powerbar with another 6 sockets weight? Thank you.

@ShawnKoh

3 жыл бұрын

@@SingleLifeSG Hey, no worries, ask away... for the 3M dual lock, they are pretty solid to the point its really hard to detach. I have all 6 sockets used and placed upside down. So yes the dual tape can hold the weight easily. As for how you'd place the tapes, that's a personal choice, I didnt see the need to move or adjust mine in the future so I use what I needed. The tape is quite pricey so use it sparingly. Hope this helped :)

@SingleLifeSG

3 жыл бұрын

​@@ShawnKoh Hi Shawn, thanks for the quick reply! :) For the dual lock, seems like cannot get it directly from 3M Lazada but found similar on Shopee, is this same with yours? shopee.sg/3M-Dual-Lock-Reclosable-Fastener-SJ3551-400-Stems-Black-i.10214.247746002

@ShawnKoh

3 жыл бұрын

@@SingleLifeSG yeah looks like its the same :)

One thing to note is that if you're using monitor arms, then the cable management bar gets in the way. It's something I don't really like because you have to drill custom holes to fit it from the other way.

@ShawnKoh

4 жыл бұрын

1.1M Views hey there, I’m using the cable management bar with monitor arms and have no issues. You can orientate the bar either ways and it will still work fine :)

@relativelybasic

4 жыл бұрын

@@ShawnKoh I see. Can I ask what monitor arms are you using?

@ShawnKoh

4 жыл бұрын

Hey, you can check out my desk setup video here: kzread.info/dash/bejne/aYB2l5aOfrK6drw.html I’m using a Prism arc02 dual arm

Omni desk seems very similar to zendesk, except the accessories offered are different. I assume buy the cheaper one or the one with the accessories you want

@ShawnKoh

3 жыл бұрын

Unfortunately I have not had the chance to test the Zendesk so I cannot make a comment on this :)

great video! what are those bose speakers btw?

@ShawnKoh

2 жыл бұрын

Those are the Bose Companion 5

Great review Shawn, really really helpful! How thick in cm is the table top? You mentioned in another reply that installing the desktop mount requires drilling. I probably won't be getting the omnidesk mount, so want to make sure the screws aren't too long to puncture through.

@ShawnKoh

2 жыл бұрын

I am no longer using this exact desktop, so I cant be sure of the thickness, but I'm sure its on their website :)

Hi, may i know how you mounted your PC with the Omnidesk Pro 2020?

@ShawnKoh

Жыл бұрын

There are some CPU mounts that you can buy from thrid party brands.

Was the installation of the desktop mount easy?

@ShawnKoh

3 жыл бұрын

Yes, the arms are clamped to the back of the table, no issues at all :)

Did the cable management bar get in the way of the monitor arms mounts at all?

@ShawnKoh

3 жыл бұрын

Watch 2:48 of this video link below, you can see the cable management bar and the monitor arm clamps. It does interfere but still works. Its hard to explain :) kzread.info/dash/bejne/aYB2l5aOfrK6drw.html

Did you get the monitor arms from omni desk?

@ShawnKoh

4 жыл бұрын

Hey Christopher, no, the arms were from a local company called Prism, they make arms and monitors.

dude just straight up lifted the table up no problem wtf. i cant lift it on my own! its stuck on the ground until i get help lol

I have just purchased it. Want to know where you have purchased the LED stand, Headphone hanger?

@ShawnKoh

4 жыл бұрын

you can find these all on ebay or your local e-shopping websites, the LEDs are from YeeLight.

I am looking at the 72” model but worried about 2 things 1) the middle of the table will sag due to most weight focusing in the middle and I understand the centre rail does not support the table 2) as both legs are so far apart, the table will fall or wobble a lot if it is heighten. Should I be concern ?

@ShawnKoh

3 жыл бұрын

Well I’ve never had a 72” table but here’s my thoughts. With regards to the sagging, it will depend on the thickness & material of the desktop. And also depending on the weight you place on the table. Yes, all tables wobble and it gets more obvious as the height increases. So there no way anyone can answer ur question as there are too many variables. Go to a store and test it for yourself, thats the only way you can know if it suits ur needs.

@nilnil8072

3 жыл бұрын

@@ShawnKoh yes I agree, I guess I am referring specifically to omni desk pro 2020 and based on your setup and of course the tabletop that omni desk used … will it sag ? Does the middle rail support it ? Or it is just a rail that houses the motor but doesn’t touch the table ?

@ShawnKoh

3 жыл бұрын

The middle rail is attached to the table, to be more specific, my video shows the ends of the middle rail being screwed into the table. It does support it and has a cross rail to span and connect the two legs. So yes it does support the sagging. At 60” wide i have not seen any sagging in my desk, and I have a really heavy monitor (43” screen) Wobbling is there but not very obvious. Hope this helps :)

Hi Shawn, just wanted to check how this desk has held up over time?

@ShawnKoh

2 жыл бұрын

Still works as good as new after 2 years :)

@Kmmc2011

2 жыл бұрын

@@ShawnKoh Thank you :)

Hey Shawn, where did you get the drawers next to your desk?

@ShawnKoh

3 жыл бұрын

Ikea! They’re called Alex drawers

@davidchuang391

3 жыл бұрын

@@ShawnKoh Thanks!

this needs more views holy shit. the effort. don't give up bro. ever. consistency.

@ShawnKoh

3 жыл бұрын

Thanks Johnny! Appreciate the encouragement!

It does look like it wobbles a lot when you shake it

@ShawnKoh

2 жыл бұрын

All tables wobble

Any issues with wobbling when you are in a standing position?

@ShawnKoh

2 жыл бұрын

All tables wobble, it depends on what you have on the table as well as the height. So far it's not been an issue for me :)

This table is how many inches? Looks super big.

@ShawnKoh

3 жыл бұрын

60 inches by 30 inches

Hi Shawn, can i know how you mounted the power bar?

@ShawnKoh

3 жыл бұрын

Industrial grade velcro tape w/ sticky sides :)

@derwinlim7609

3 жыл бұрын

Hi Shawn, mind to share where can get the Velcro tape that you mentioned? Thanks

@ShawnKoh

3 жыл бұрын

@@derwinlim7609 Sure! Here you go! www.amazon.sg/3M-Reclosable-Fastener-Household-Scissors/dp/B083JK2295/ref=asc_df_B083JK2295/?tag=googleshoppin-22&linkCode=df0&hvadid=404190008054&hvpos=&hvnetw=g&hvrand=17425364476213587236&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9062530&hvtargid=pla-872544446638&psc=1

@derwinlim7609

3 жыл бұрын

@@ShawnKoh thanks 😁

Amazing review, but i clicked on your affiliate link there wasnt a table similar with urs. There was only tables with a circled area in the middle of the desk. Did they remove the product already?

@ShawnKoh

2 жыл бұрын

Hey there! there are 2 different table shapes, one with the curved-in part and another for a regular rectangle. You might need to go into the Buy-options to customize ur choices :) hope this helps!

@hishiko

2 жыл бұрын

@@ShawnKoh Thank you so much for the reply! I manage to find it :)

Hey, thanks for this really awesome review! Can you comment on the stability of this table at sitting height(~75cm)? i’m quite particular about stability as i don’t want my monitors to be shaking or the table to be wobbling (even slightly) when making fast mouse movements during gaming or while typing. Thanks!

@ShawnKoh

4 жыл бұрын

Hey Sherwin, so far not much shaking as far as I can tell,. My sitting height is 73cm and I have not seen much shaking. The occasional vibrations when typing angry emails but so far so good. :) I wouldn't say there is absolutely no shaking, its still a 2-leg table so stability is limited compared to a 4-leg table. If you have a chance, check out their showcases at some computer fairs before buying. Hope this helps :)

@sherwin_ee

4 жыл бұрын

Shawn Koh Thanks for your input! Unfortunately during this cb period i can’t go down to “test” the table. i actually have the same monitor arm as you. Is there any wobble on the monitors (lifted side by side instead top and bottom) when typing and moving the mouse quickly?

Does it need to be plugged in at all times?

@ShawnKoh

3 жыл бұрын

Well technically no, but it defeats the purpose of having an adjustable desk. Most desks can have their heights adjusted, but for the Omnidesk, the advantage is that it lets you move to a standing position when you need it. So I'd recommend plugging it in all the time. But then again if you plug it out, it will still work like a normal table.

Does it come with a desktop mount/stand?

@ShawnKoh

3 жыл бұрын

Absolutely not 🤣 you have to buy that on your own :)

@jimmyjamesraynor6180

3 жыл бұрын

@@ShawnKoh does Omnidesk provide an in house mount for the itx case? Any compatibility issues with other brands? Thanks

@ShawnKoh

3 жыл бұрын

@@jimmyjamesraynor6180 They do sell these under table mounts but they are the typical ones you can buy on amazon. So far the mounts are pretty universal, I didnt buy from Omnidesk, i bought from Amazon :)

@jimmyjamesraynor6180

3 жыл бұрын

@@ShawnKoh Thanks for the replies. Cheers! :D

There's a PC mount in your video, I suppose the holes aren't predrilled?

@ShawnKoh

4 жыл бұрын

Yeah there were no pre-drilled holes in the desk, so I had to do them myself. Not a big deal but u need some wood working experience to manage this :) Drill too deep and ur table top might get punctured!

@Kyle-sx1yb

4 жыл бұрын

@@ShawnKoh Thanks for the info, just ordered my desk without assembly and realized they didn't mention this on the purchase page.

@ShawnKoh

4 жыл бұрын

@@Kyle-sx1yb I actually found the same exact PC mount on Lazada, its cheaper to buy there than to include in ur purchase from omnidesk :)

@Kyle-sx1yb

4 жыл бұрын

@@ShawnKoh Are you serious, do you have the link lol

@ShawnKoh

4 жыл бұрын

Universal Pc Case Holder Under Desk Wall Side Cpu Stand Adjustable Computer Mainframe Hanger Host Box Stand Bracket Rack Gd08 s.lazada.sg/s.JwBB

Hi Shawn, I moved out several times a year. How easy it is to remove the legs to transport the desk. I would not remove the pieces which are directly screwed to the desktop but disassemble the parts making up the legs. Would doing this a few times a year weaken the whole desk after a while? Nice video by the way. Keep up the good work!

@ShawnKoh

3 жыл бұрын

From my experience assembling these tables, its pretty easy to disassemble and move in parts. Don’t think you have to worry about it weakening cause of this :)

@itsflorent

3 жыл бұрын

@@ShawnKoh Thanks Shawn!

I live in Europe, so as i understood i can not get this desk?

@ShawnKoh

4 жыл бұрын

You’ll hve to check with the company that actually makes this. I can’t answer this

@user-kd2qk5jw2x

4 жыл бұрын

@@ShawnKoh i called and they told me they do not ship in EU 😭😭😭

Wobble test?

@ShawnKoh

3 жыл бұрын

It shows you didn't watch the full video lol

@Accuaro

3 жыл бұрын

​@@ShawnKoh Do you mean the shake test at 4:41? I meant actually leaning on it and seeing if it would tilt, though reading my comment now I realise yeah perhaps wobble wasn't getting my point across lmao, apologies. If you were to stand up and lean on the edge of the desk, would it tilt? 4:34

@ShawnKoh

3 жыл бұрын

@@Accuaro Haha okok i understand you now. Well it doesnt wobble too much, i mean all tables wobble abit. But it think its perfectly fine.

I noticed a bit of a curved in the middle of your table top. is it real?

@ShawnKoh

2 жыл бұрын

The curvature is caused by the distortion from the lens. The table is not curved at all. :)

@n.aminr.7175

2 жыл бұрын

@@ShawnKoh great. Planned on getting one but not sure if the middle can withstand load without bending down at full extend table top

@n.aminr.7175

2 жыл бұрын

@@ShawnKoh Bought one. Small but still it curved so bad. I guess your's curved too. But you're defending Omnidesk by blaming your lens. I guess you're sponsored. Your Monitor frame stays linear. but not your table top.

You can literally see the desk bow in the center 9 seconds into the video. Decision made.

@ShawnKoh

2 жыл бұрын

Its called lens distortion 🙄

I still took 3 hours.. :/ :(

@ShawnKoh

4 жыл бұрын

Hahaha ow nooo haha don’t worry! Everyone has a different pace but atleast u saved some money from the installation cost hahaha!

@ririvespertine

4 жыл бұрын

@@ShawnKoh Haha I probably dont really know how the table looks like in the first place. But I love my desk now :D

@ShawnKoh

4 жыл бұрын

Well im glad you’re enjoying your desk! Thats the main goal hahaa!

Wrong. You forgot step 0: empty your room

@ShawnKoh

3 жыл бұрын

🤣 movie magic

Why do i still find this table is overpriced. 😅

@ShawnKoh

Жыл бұрын

Well... everything can be over priced to anyone, it depends on your budget.

CovidImages need to be invested more than half19

@ShawnKoh

2 жыл бұрын

What talking you?