the kit works good the power and torque gains vs the stock setup is just wow the only concern i have is the hot side of the new turbo is extremely close to the right brake line the brake fluid inside is getting super hot for sure and the coolant hose going to the climate valve is against the turbo wastegate solenoid bracket the other little thinks that needs to be take care is the pressure hose going to the solenoid is to close to the exhaust manifold and getting a lot of heat from it and that is all i will be taking care of at some point verry sun and i just ordered a 3bar map to replace the stock one and see if that stops the defueling issue at wot

you should make a kit where you only sell the turbo stuff with out the ecu for ppl that are doing manul pumps , my two cens

@BenzInjection

Жыл бұрын

Yes, that's how it is setup. When you check out, you can choose if you want to include an ECU or not.

Make a video driving the car with this kit!

@matancero1986

4 ай бұрын

i just upload a couple of shorts

Excited to install mine 🎉

@liamhoanzl2920

9 ай бұрын

did u install the kit ?

Where do I buy or get more info on your kit? I already have the Sean Tracy ECU upgrade. How much of a power increase can I reasonably expect with the Holset turbo upgrade? Do you also sell the turbos? What about the injection pump do I want or need a high flowing pump?

@BenzInjection

11 ай бұрын

You can get this kit and find the answers to your questions at benzinjectors.com/turbo-kits

Why are the bottom 2 bolts connected the turbo to the manifold so hard to get

@nonreliable

4 ай бұрын

I’m still stuck on that part of the removal

Thank you, where can I buy the manifold adapter pipe?

@BenzInjection

3 ай бұрын

Email us info@benzinjection.com

Hi, what is the price for the NA om 602 turbo kit? Where I could contact you?

@BenzInjection

3 ай бұрын

I don't have an NA 602 kit.

How many HP after the upgrade ?

@BenzInjection

4 ай бұрын

Around 300 HP.

Pump ? Turbocorector? Preasure?

@BenzInjection

4 ай бұрын

Stock EDC turbo pump, HX35 8cm, around 1.5 bar.

@oleksandr9415

4 ай бұрын

@@BenzInjection thank you

@drissios

4 ай бұрын

@@BenzInjection Hi with stock injection Pump ? stock injector pressure ? stock MAP Sensor or upgrated to 2 BAr ?

@BenzInjection

4 ай бұрын

Stock everything@@drissios

is there a kit available for om605?

@BenzInjection

3 ай бұрын

I can make you one. Email me please info@benzinjection.com

@anassdkh

3 ай бұрын

@@BenzInjection thank you for your fast response, i will :D

Salut , sur quel site peut ont acheter se kit? merci

@BenzInjection

Ай бұрын

www.benzinjection.com/turbo-kits

@allettf4804

Ай бұрын

@@BenzInjection merci