Amazing ! Love your sense of humor on the sleeping arraignments.

It's great to see a company be successful and good to see you successful also, Gary! Keep up the great work!

@turbocobra

Жыл бұрын

Thanks Reid, good to see you

Dude, I just put down a deposit on my first plasma table. I dream of the day I can afford and need one of these machines. Soo bad ass! Its awesome to see, only a couple years ago when you bought your homestead, to now your killing it loving your best life. Good for you brother!! Bravo sir!👏🏻

Love seeing these amazing machines do their thing!

@turbocobra

Жыл бұрын

Oh yea! they are cool for sure

Schism! Love it!

Perfect choice of music for this. Band name says it all. Well done sir.

You are creative, I follow you from Libya

Those machines are absolutely amazing 🤩

@turbocobra

Жыл бұрын

Yea they are sweet for sure !

Damn Gary, you are knocking it out of the park. It’s good to see it.

@turbocobra

Жыл бұрын

Haha well I dont know about that.. but I am staying busy with plenty to do, and getting a chance to travel around and help customers grow their business with these machines... thats a good thing!

@dowellaser-Master

Жыл бұрын

good

I can't imagine troubleshooting machines like that, but boy there's nothing like em when they're cooking! Did the old barn meet it's end? looks like you've got a whole bunch of changes happening there! Thanks for sharing

Showing of laser machine from different angle to show the overall performance n than leaving evaluation for viewers, in my opinion is mind blowing thanks sir for this amazing ways.

@turbocobra

Жыл бұрын

Thanks. I agree with you ...

I never get tired of seeing that flycut🤩

@turbocobra

Жыл бұрын

I have been doing 1-2 installs per month for the last couple years, and even with all that, I still love setting it up and watching it, filming it. If you have never seen it in person, the videos dont really do it justice.

@Hoop8732

Жыл бұрын

@@turbocobra I am hoping to try it on my machine one day once I know my settings are dialed in the best I can get them. I have learned a ton from all your videos and FB group.

Always enjoy the videos! Wish we could see more of the tube cutters!

@turbocobra

Жыл бұрын

lol, yea they are pretty cool, but man they are kind of a novelty to be honest.. Sheet cutting is way more profitable so most of the guys that get combo machines eventually stop usign them because the sheet cutting is in high demand and alot more profitable

@maloyaircraft1174

Жыл бұрын

@@turbocobra having the capability is helpful in aerospace for complex coped joints. How could I reach out to you about pricing?

@turbocobra

Жыл бұрын

@@maloyaircraft1174 the combo machines start at $100k and the standalone tube machines start at $76k. If that doesn’t scare you off, email me gary@ramseycustoms.com

How does the weld penetration compare to mig welding? Have you tried doing sanitary welding with it?

I'm not even in this industry, but after binging your videos I want to buy equipment from you!

Whats the power soucre of OR-FM lasers are in majority of orders? 3kW or 6kW?

Man, another killer operation powered by Ramsey Customs!

Dude great music choice!!

@turbocobra

Жыл бұрын

Lol, glad you approve.

I was sitting in my shop watching this video, trying to figure how my Tool playlist suddenly overtook bluetooth lol

Hi Ramsey I have raycus 1000w in cnc fiberlaser I have questions nitrogen gas can cut mild steel and carbon steel or no just need oxygen to cutting mild steel and carbon steel... I know nitrogen is expensive than oxygen but just I'm asking you this question if it can cut mild steel and carbon steel or just using nitrogen for stainless steel and aluminum and copper Also my other question for purity of oxygen if purity of oxygen just 93% and 7% other gas can cutting mild steel and carbon steel or no

Cool stuff Gary.

@turbocobra

Жыл бұрын

thank you sir for watching.

Damn - I have no use for a monster CNC laser, it’d take up most of my basement, it’d probably cost a few $K just to hire a rigger to wrangle it through the yard and down there for me, and no way I’d ever convince the wife, but … I want one! 😆 (And wow, those tiny, fine gratings were pretty mind-blowing, I had no idea a machine of this size and lower could do such fine work!)

👍👍👍

at 20:35+, is that a Viper chair?

Your equipment sells itself.

@turbocobra

Жыл бұрын

thank you sir

Lovely detailed video. Liked the 1/4 inch pierce with oxygen. Never tried this pierce style. Would you share the settings? I too have a 3000W

@turbocobra

Жыл бұрын

thanks for watching! cant share the pierce settings, that, and a few other things are special things I do for customers that purchase from me, and if i share it with everyone, it devalues the service i offer. but just a tip... its not hard at all to setup .

@goldenconsultants7811

Жыл бұрын

@@turbocobra Well taken and i appreciate the service you provide your customers. Thanks

I feel like I learn something new everytime I watch one of your videos. Gonna have to try the pre piercing and that technique to break up a long slot. I've been using micro joints but that would work better in my opinion.

@turbocobra

Жыл бұрын

slug destruct and microjoints are helpful. slug destruct if over used will have a significant impact on your cycle times, and drive up your N2 bill lol. But its handy to be able to use all the features when you need them

@Stupidwon1234567

Жыл бұрын

@@turbocobra absolutely agree, I could see me using the slug destruct only on certain drops of a part just like I use micro joints.

Nice video . Another good company helped out by Gary Ramsey. Robin is saving up for that 12 kilowatt .

@turbocobra

Жыл бұрын

and just think... it all got started 18 months ago when I installed the very first laser in your shop!

Great video! What is the best software to drawings simpliest things, like in the video?

@turbocobra

Жыл бұрын

In the video it showed Fusion360, which is 3D parametric modeling softrware, not simple or easy. For basic 2D drawing I really like Vectric Cut2D.

@padamm

Жыл бұрын

@@turbocobra Thanks for your answear🙏🏽

When I served my apprenticeship in the 1960,s + or - 1/16 of an inch on a fabrication was good.

@turbocobra

Жыл бұрын

Well thats still a good tollerance depending on whats being fabricated. If yoru fabricating skyscrapers, 1/16th is awesome. if yoru making small aerospace parts, its got to be .001" or less.

@aytonbob

Жыл бұрын

@@turbocobra I used to make Challenger 2 battle tanks.

20:55 " Ow! You're fired ! "

@turbocobra

Жыл бұрын

exactly!

Very nice work! Do you sell to Europe as well?

@turbocobra

Жыл бұрын

Where in Europe? I could help you import one and come and install it for you

@andrei14c

Жыл бұрын

@@turbocobra In Romania.

@turbocobra

Жыл бұрын

@@andrei14c ok, I’d love to help you. I will guide you on the purchase, and come spend a couple weeks training you and install it for you. $25,000 USD is the fee i Would charge. You can probably find a dealer closer to you that would do it cheaper

@andrei14c

Жыл бұрын

@@turbocobra thank you for your offer an answer! We already have 2, one for pipes and one for metal sheets. What about training?

How can I make money off one of these? They seem very interesting to have.

Need those pierce settings for 1/4”

@turbocobra

Жыл бұрын

oh yea? lol

wow!! thank U!!

what made you switch from prima to oree?

@turbocobra

Жыл бұрын

A few reasons, but both are good machines. I am about to switch to my own branded machine with some very cool/unique features.

You always buyinh Oree Laser...is it economical or industrial use?

@turbocobra

Жыл бұрын

no I have my own brand now

Hey he got the American laser. Fan instead of fenji😂

@turbocobra

Жыл бұрын

lol, I forgot about Fenji. I think yours is the only with that special designation!

@jonahmorgan1234

Жыл бұрын

@@turbocobra Well I’ll be dang I’m just special that way lol

Hello, I am in Mexico so I will import directly. Are you willing to give training? (Of course in exchange of a payment)

@turbocobra

Жыл бұрын

i have training videos for sale on my website, but do not offer any training beyond that. I no longer sell OREE machines, but my own brand.

Old friend, you might need to stick with the laser business and leave the drone stuff to someone else :)

@turbocobra

Жыл бұрын

Yep, you are very wise to be such a young man! In fairness the last one was brand new and after researching it there is a bug and a new software update for it. Guess what the bug is? Drone flys away on its own! That’s what happened. First one I was flying to low over the Colorado river and let it go swimming 😂

That "stuff stickin to it" is called dross. Slag is from welding Dross is from cutting.

@turbocobra

Жыл бұрын

Not exactly. What I was referring to is the displaced metal dust, that is loose but sticks to it like a magnet. Dross is a plasma table term, you won’t hear that used in the laser world. It’s either burr free, or has a burr. I never mentioned slag

Price?

@turbocobra

Жыл бұрын

Price for what ?

@anthonyperea9639

Жыл бұрын

Laser

Nice laser

I m intrastad price?

@turbocobra

Жыл бұрын

i mostly only sell to the US and other english speaking countries

@lkmohammed

Жыл бұрын

If you cut sheet metal a lot, I think maybe you're more interested in it kzread.info/dash/bejne/Y2xt3NORpK2snM4.html kzread.info/dash/bejne/lIRo1rSfZprfmrw.html

You are ding good that new nothing about manufacturing until 2018