OldGuyDIY 2000-2006 NBS Tahoe Suburban Rear Wiper Motor Repair Fix Jumper Past Burned Ground Pin Out

Тәжірибелік нұсқаулар және стиль

Please subscribe if you enjoyed this video. Thank you for watching. The following link takes you to the thread I found that allowed me to get the failed rear window wiper back in action.
www.justanswer.com/chevy/625h...

Пікірлер: 7

  • @AAhmad3449
    @AAhmad3449 Жыл бұрын

    Hey I have a 2006 chevy tahoe and my rear windshield wiper isn’t working. It just makes a buzzing noise! I looked at the fuses they look good and I looked at the wires in the rear and it looks good too nothing is burnt or off!

  • @OldGuyDIY

    @OldGuyDIY

    Жыл бұрын

    It sounds like the wiper motor may have failed. If you use a volt meter to check the voltage at the wiper motor plug, you will know.

  • @minorityreporter9104
    @minorityreporter9104 Жыл бұрын

    What gauge was that black and purple wire i have the same issue just cant figure out which gauge i need for replacement wires?

  • @OldGuyDIY

    @OldGuyDIY

    Жыл бұрын

    I would guess 10ga. I grabbed a piece with similar thickness out of a box of leftover wires. I didn't measure the wire. Good luck.

  • @ronald3597
    @ronald3597 Жыл бұрын

    Hello Is the purple wire from the big harness that you cut is also a ground wire ? Please reply thanks

  • @OldGuyDIY

    @OldGuyDIY

    Жыл бұрын

    I don't recall. I simply ran jumper wires for the black and purple wires, black to black, purple to purple, and it worked as it should.

  • @ronald3597

    @ronald3597

    Жыл бұрын

    Sound good thanks

Келесі