This happened on my 2002 Limited about a year ago I had the same issue. The light was flickering so I took this little piece out and just threw it away. Sprayed the rest of the switch with some brake cleaner just to get all the grime out of it and it’s still working today. This man has a lot of great do it yourself tips. These honest mechanics are a dying breed. God bless you sir.

MARRY ME!!! Not only have you saved me $300+ but you are a straight up HONEST guy. We beed LOTS more mechanics like you around.

@OnlineMechanicTips

2 жыл бұрын

Lol, thanks, and thanks for watching my friend. Please thumbs up the video and subscribe to the channel for me, thanks

I don’t even have a car 😂, i just love watching you talk.

@jamaalbradley255

2 ай бұрын

😂😂😂 you're on your way to becoming a human OBD2 Code inspector bud 👍🏾

Finally I knew it wasn't a bad engine. No knock or rattle but that stupid light keeps coming on. Thanks for being straight up on this.

There was about 41/2 minutes of information, but it was so entertaining that I had to watch the whole thing. My neighbor has a 07 pt, and she has questions every once in a while, so I subscribed here. You sound knowledgeable, and you try to get the point across so hard it's fun to watch. Good job. It's appreciated. Thanks.

Dude I have had this problem on my PT Cruiser for years but only in the summer. I rebuilt the engine, has 310,000 km on it, and I changed the oil pressure unit and I still have this problem and the oil pump is fine so you just fixed my car! Many other PT owners have the same problem, one guy I read rebuilt his engine and added an oil cooler just to fix this one issue. Thanks👍

Damn man i thank you soso much i had this problem for years and the workshop changed everything. The oil seals, oil pan oil sensor but ntohing worked and i payed so much money. And in the end it only was a little plastic pen. You are the best men.

You are the best and talk in a way that I can understand... Not that mechanic talk that loses me with terms...

I'm going to try and fix this myself. Thank you so much for taking the time to walk us thru this.

Thank you so much for the video. I unplugged that sensor and I heard it make a woosh sound when it released the pressure! You’re the man!

@OnlineMechanicTips

22 күн бұрын

Thanks for watching. Please remember to thumbs up the video and subscribe to the channel. Thanks

Your explanation makes so much sense! I have been seeing 'thousands' of videos about the problem, but no explanations, nor do any say anything about hooking up a pressure gauge to verify the problem.

THANK YOU SOOOOO MUCH!!! You've saved my sanity. 🤣 There was a good bit of oil buildup when hubby pulled the "bullet" out. We just recently got an pull change so we were wondering what the problem was. Thanks again!

Just listening to this...it sounds like Roy Jones Jr giving me good advice on oil pressure.

@briand563

Жыл бұрын

Haha you're right lol. One my favorite boxers

Absolutely fantastic tutorial... Good guys still exist!

I was impressed by your unique presentation and I respect yours years of car experience with the Pt Cruiser. I subscribed to your channel with expectations of hearing and learning more about (the trick of the trade).

@OnlineMechanicTips

3 жыл бұрын

Thanks for tuning in bud. I have a complete playlist on PTs and more added regularly so stay tuned

Had to smog mine in CA , failed due to my drive cycle to pass but oil light popped up an lost $60.00 on my smog certificate. Took your advice pulled pin , did my drive cycle OIL LIGHT never came on vehicle was ready and PASSED! with no indication of oil pressure problem listed on smog check, so thank you! It usually only came on when the car was hot That is why you're reason makes it 100% accurate. An thank you for suggesting replacing the sensor just in case there is any oil pressure issue this makes it a perfect preventive maintenance suggestion. Thnxs Again!

Loud and clear! And energized as well! Thank you Sir!

You are so awesome!!! I come to you for any of my 07 issues. I have saved soooo much money because of your help. Thank you, thank you, thank you!!

@OnlineMechanicTips

2 жыл бұрын

Thanks and you welcome my friend.

AWESOME TIP.. THANK YOU... Too bad there aren't more honest mechanics around. I'm having problems with a oil pressure sensor in my 2007 H3 Hummer now. GOD BLESS & THANK YOU

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching Jason, please remember to thumbs up the video and subscribe to the channel, thanks

You are the best at explaining

You're simply amazing, very thorough. I believe that I can do this myself and I'm going to try. Thank you so much.

@OnlineMechanicTips

2 жыл бұрын

Hey Becky,, go for it. And thanks for watching my friend.

@beckycantrell668

2 жыл бұрын

@@OnlineMechanicTips Thanks to you! This girl did it herself. Yay me 🤣

@beckycantrell668

2 жыл бұрын

@@OnlineMechanicTips And the oil light has not come back on 💕

You're awesome! Thank you for sharing you gifted knowledge. You saved me alot of unnecessary money. I subscribed to your channel, keep 'em coming! Thanks for all the PT Cruiser videos especially!

@OnlineMechanicTips

17 күн бұрын

Awesome, thank you!

Thanks for the information. You are a great mechanic.

@OnlineMechanicTips

3 жыл бұрын

Y thank you my friend..please remember to thumbs up the video and subscribe to the channel..thanks

...Keep'em coming 👍👍👍

Roy, you are the man!

Incredibly thorough. Love this guys knowledge. Gotta find out where youre located so I can bring my PT Cruiser to YOU!

This man knows what he is doing

This man is a Genius!!!

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching my friend..please thumbs up the video and subscribe to the channel, thanks

THANK YOU SO MUCH , I LOVE YOUR VIDEOS AND NOW I LIKE MY CRUISER

@OnlineMechanicTips

3 жыл бұрын

Awh thanks for watching. Dont forget to thumbs up the video and subscribe to the channel, thanks

Thank you,I'm having same issue with my PT Cruiser 2006 I'm doing this soon . God bless you!!

Thank you very much my good Sir! Awesome video!

I have a Chrysler 300. Thankyou for the honesty.

This mah dawg yo! He has saved ne thousands of dollars with his car tips! Mad props! 👍👍👍

@OnlineMechanicTips

Жыл бұрын

Thanks for tuning in PJ. Remember to thumbs up the vids, thanks

Good vids grt info. Chrysler be wildin with the grazy design attempts on almost all of their rides you gotta luv'em.

@OnlineMechanicTips

3 жыл бұрын

Yea well stay tuned bud, the new stuff coming out even wilder..lol..thanks for watching

Brilliant you are .the mechanic was going to hit me for six ,but thanks to this video bingo!

@OnlineMechanicTips

Жыл бұрын

Thanks for watching, please remember to thumbs up the video, thanks

Great info. Will try this for sure.

Thank you....knowledge is power...you are powerful

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching bud. Remember to thumbs up the vids and subscribe to the channel, thanks

This man is the real deal

Dude! Great vid. I don't have a PT cruiser. Was looking for info on a kia but watched this anyway. A lot good info here. I like your teaching style. Haha. subbed

@OnlineMechanicTips

Жыл бұрын

Thanks Brian, thats whats up.

Best mechanic.. I dig him.

@OnlineMechanicTips

2 жыл бұрын

Thanks for watching bud

Thank you Sir. for sharing your knowledge ❤️

@OnlineMechanicTips

2 жыл бұрын

Welcome!

Great video, man. Thanks for all the helpful advice

@OnlineMechanicTips

Ай бұрын

Thanks for tuning in Tommy. Please remember to thumbs up the video and subscribe to the channel. Thanks

This is excellent! I have this exact problem with my 2002 Chrysler Concorde Lxi with the 3.5. Fortunately that sending unit is easy to get to from below. Thank you!

@OnlineMechanicTips

6 ай бұрын

Thanks for watching Patrick. I hope it works out for you.

Thank you so much! I appreciate you!

My dude great vid. Worked perfectly

@OnlineMechanicTips

3 ай бұрын

Thanks for tuning in

Great Video Bro Time to Change Mine

Great video thank you

Thank you brother. Problem solved! Be well.

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching bud, please thumbs up the video and subscribe to the channel for me, thanks.

I DID IT! I replaced my wiper switch and my oil sending unit myself! Thank you for your help! One question though, is the oil pressure "sensor" and the oil pressure "sending unit" the exact same thing?

Excellent video

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching. Remember to thumbs up the video and subscribe to the channel, thanks

Great representation representation, my brother.

thank you man i have learn i lot from you thank you agent

Excellent video!

@OnlineMechanicTips

4 ай бұрын

Thanks for tuning in. Please don't forget to smash the like button and consider subscribing to the channel. Thanks

@dogscratchedoor

4 ай бұрын

I sure did. Don't have a PT but a Dodge. I think I can still get some good info. I can tell you have a lot of experience and explain things even novices like me can get.

Thank You from America

@OnlineMechanicTips

2 жыл бұрын

Thanks for watching my friend. Remember to thumbs up the video and subscribe to the channel, thanks

Good info! Thanks! 👍

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching..don't forget to thumbs up the video and subscribe to the channel. Thanks

Thanks ,great video.when the rain stops im on it,mine leaking oil like old faithful and daughter tired of that light crap.

@OnlineMechanicTips

3 жыл бұрын

Yes, fairly easy job. Thanks for watching bud, please thumbs up the video and subscribe to the channel, thanks

Hey buddy very easy ro understand and all mechanics should be as intuned to the customer or owner of a vehicle needing repair. I wanted to ask you about my magnum se 2.7l. Over the holidays it had been leaking coolant and i took it into a different shop then normal. I was not comfortable with it but needed it for holiday. Car went in for diagnostic. Included was water pump, tensioner timing cover gasket valve cover gasket or plenum gasket thermastat and housing in addition to tune up and oil change with filter this was original verbal estimate of 1100 With additional request of oil change w filter tunewith plugs and wires if needed. He requested car be left dor at least 3 days. I said 3 days thats alot of time. So he said 2 days byt i lije to say 3 in case because we need to check timing chain guides because its all in same area. So i Dropped car aftrr talking with mechanic because he seemed knowledgable regarding this particular model engine. I discussed what i wanted as far as qualit u in a part and didnt nrmally buy from oreillys for quality OEM parts are the way to go for length of work involved and money i spent and he said oh no that would be cery expensive but it was my choice as a customer and owner. At any rate i requested also old parts be put back in my car as well as new boxes. second day i dropped by to check in after calling regarding abilit to purchase kits for thermistaf n housing as well as water pump kit to save me money and knock out other areas as mileage was at that inteval I also wanted my estimate an work order as i only signed a form for them to get started. Over phone he basically revealed it was thermistate chanfinf order to only thermistate n housing but 500.00 i asked what was included to be so high he quoted spark plugs being 9@ a new reservor etc erc but still didt gve e a estimate on visiting i noticed my engne had oil buildt up like a coating and starting to accumulate. Long story short my car ran good ever any check egbe light no dash warning lights ever and changed oil with only a number 5 plug misfire early on when i bought it in 2021. On 2nd day i was told it was warer pump too so he had t do the work order given frst of 1100. After seeing car on 3rd day clse ro mid afternon i got frusrrated knowing i was nt going t get it eve folwing day. An still only got an estimare with parts list no numbers for parts like requested or details on how other related parts looked he assured me it would be ready but it was a big job. Low n behold 3 rd day i gor call it was ready and he was going to test drive it. Later he callex said he wanted me my ghy t cone tommorrow to dscuss a problem he ad with car i was instantly anxety riden and said just tel me whats gong on with car. He said ge was driving it and it made no noise but oil light came on instantly an it shut off. He said he tried it again check engne lighr was om and it started died on spot i said dnt keep tryibg to start it you wil damage it. He said be patiebt an give him tinw to get it back to shop and wlll call his brother. He called said he was bacm at shop and hes sure engine went. I was upser an around corner an was coming over. He said im not at shop. I said y just said you were. Following day we needed a car estimaes exchanged but was ignired on requests to look under hood. Evertually keaving witb owners newer subaru instead of rental with undserstanding he would take care of car becuz it was in his posession when engine failed. Denied any stored codes at any point especially after engine blew. After xmas he called me to go over hm finding an engine i didnt think to ask what kind of warrenty but ended up being 90 day however upon returning vehicle paying 1200 no info written where purchased from and warrenty notes written in as 90 days from time he purchased nit 11 days later when i got to drive home with my car. It overheated on hill coming home 2 weeks later went back inro shp after oem thermistate was ordered from dealer . Not to mention off brand he went for faled n thermistate and water pump was same brand too. Each time my cars went int shop i find thngs ike my horn hangng damaging radiator and il cooling delicate fins liise or missing bolts an lush oins as well as loose ground wires too. Mostly id like to know yr thougts and ask why would my engne oil dipstick be so tightly fitted under housing tube from airr filter housing making it crunced under it and the next tine it be okay centered where it shoud be and last time hise from l shapex boot off side of air filter housing so close and tightly above oil filler cap i cant take it off unless hose comez off. Incidently my other engine he had us look at to show difference ibside an my old engine had metal shavingz kf good size at bottom and sparky shavngs everywhere and still denies seeing any codes or hearinv any noise and air flter so coated with coolant and never did they think to change.

Great video. Thanks for all the info and tips. Your lucky we're not neighbors, you would have 2 more PT's to work on or "help" with. My mom's + mine. Lol. I did the next best thing n subscribed. Thanks again. Have a good one.

Thank you for making the video. It's been a week, and the oil sending unit warning light has yet to come on. I did remove the plug/spike and replaced it with a piece of tubing from a can of brake cleaner I had. I also found oil running down the side of the engine and found another video showing that I needed to replace the PVC valve and hose, which solved all my issues. It's crazy that a hose will stretch and weaken to the point of leaking, and there are no clamps on the OEM; poor design. The replacement of the oil sending unit wasn't hard, but it was a pain to reach it. Most of it is by feeling for it and not seeing the part. No more warning lights and no more leaks.

@OnlineMechanicTips

2 жыл бұрын

Thats whats up my friend. Thanks for watching and remember to thumbs up the video

@vibingwithredd4540

2 жыл бұрын

was this a pt or a town and country or caravan might have to see if thats a problem on my van

@OnlineMechanicTips

2 жыл бұрын

@@vibingwithredd4540 The repair apply to any vehicle using this connector.

@vibingwithredd4540

2 жыл бұрын

Man I just went out side to check the van to see a leak on some card board I left this morning. Minimum. Now looking at it overhead . 1. Found burn exposed wire leading down towards the sensor 2. Three wires hanging I turned the van on and the lights was going off oil light and chime . So I opened the window and started wiggling the wires and checking every time same thing chime and lights. Then I looked and the plastic cord protector on the bunch of cables and it was a lil piece disconnected . Man I added that piece to the last wiggling and wellll………. God is goooooooood cuz the lights went out and I don’t have to get under there before work . I bought the piece and was gonna order a oil pan and gasket now I just gotta go to the 1.25 plus tax store and get some black tape . Everyone God is great u take one step he’ll match each time . Moral of the story be a lil proactive if you don’t have the cash . Pray on it research and try . I did and loook ant the outcome

Thank you !!!!

Gonna give it a shot right now! *I "subscribed".

@OnlineMechanicTips

Ай бұрын

Thanks bud. Good luck

great information, thanks.

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching, please thumbs up the video and subscribe to the channel, thanks

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching my friend, please remember to thumbs up the vids and subscribe to the channel, thanks

I've had the flicker in my 2001 since I bought it. I'm a second owner. I've heard that it was a common issue and as long as my oil was good I disregarded it. My grandson is using the car now. Recently I replaced the valve cover gaskets and oil pan gasket, as well as brakes suspension and steering. Doing the work Myself I didn't mind spending the money for parts, knowing they are all new now and at a fraction of just a few new car payments. My grandson gets crazy about the light flickering and thinks it's gonna burn up. I told him that we shouldn't be leaking oil now and as long as he checks and it's good, don't worry. I can't wait to try this fix and get rid of the issue and my grandson worrying about it.

Outstanding.

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching my friend. Please thumbs up the video and subscribe to the channel, thanks

Thanks for the light in my tunnel God bless brother

@OnlineMechanicTips

2 жыл бұрын

Thanks for watching Ron, please remember to thumbs up the vid and sub the channel so the video would spread. Thanks bud

Thank you

Thank you.

our neighbor has an issue with hers gonna fix it, thanks for this video, just gotta look for the neon green connector

Your awesome!!!

Outstanding video. I subscribed also.

@OnlineMechanicTips

3 жыл бұрын

Why thank you my friend.

Thanks Dude!

@OnlineMechanicTips

3 жыл бұрын

Thanks for watching. Remember to thumbs up the video and subscribe to the channel, thanks

Well, well, maybe my 2006 Hyundai Elantra SX, has same problem, that pesky flickering oil light at hot idle. I replace, oil sender unit, oil pump, and big end bearing shells and main bearing shells, and crankshaft thrust washers. Also all Conrod and main bearing cap bolts. That pesky flickering oil light at hot idle, still lingers. Well I will check the oil sender connector like here to see if it can breathe. Great share! 👍

Thanks bro so much

@OnlineMechanicTips

9 ай бұрын

Welcome

Thanks mane i wanna learn all them secrets 😁

Thanks

Get out. Wow that's one heck of a tip. Very interesting fix. Great video JT! 👍👍

Thanks a lot for the info I've replaced the unit and removed the pen as adviced now oil light is gone and the car runs as usual, However there's a bit of extra noise kind of like compressed air blowing while the car is running, should I worry about it or just ignore it?

_I like you! You did a really great job teaching me about the PT Cruiser. Any tips on fixing oil light for 2002 Chrysler 300M?_

@OnlineMechanicTips

3 жыл бұрын

Well thank you my friend, can you like the channel enough to consider subscribing to it? thanks. Now, what size engine in this 300M?

brilliant

You seem like the right guy to ask. My sons 2002 Nissan Xterra V6. He got it to start it to go to school and oil pressure light was on. The next day I pulled it into the garage no funny noises oil level is clean and where it should be got a new sending unit from AutoZone took the old unit out which looked to be original with the vehicle put the new one and hooked it back up turn the car back on oil light is still on. But it is very dim on the dashboard not like when I turn on the accessory mode it’s very bright. I checked the connector make sure it was all clean it was no oil residue on it. I did a multi meter test on the old unit and there was no continuity between the one pin at the top and the body of the unit. I tested another new switch that I purchased separately and that one has continuity. I have not had a chance to check the one that I installed from AutoZone yet. Any thoughts I feel like it’s something simple that I missing. But my test confirm that the old switch was bad but after I installed the new one from AutoZone it still did not turn the light off

Nice! TY!

Thank you for your video's they are always so helpful.

u da man

@OnlineMechanicTips

2 жыл бұрын

Thanks for watching. Remember to thumbs up and subscribe to the channel, thanks

So glad I found this video and was introduced to your channel. My question is do you believe I could be having the same issue with my 2008 Dodge Caliber? Not sure if they will notify me if you reply to my question so I'll definitely be checking back with you!!! Damn, I wish I had found your channel before selling my 08 PT, I loved that car but it definitely has a lot of problems your knowledge could have helped me on

@kentbates4266

Жыл бұрын

I forgot to mention, I love your no bullshit approach!! Straight up from the get go.

@OnlineMechanicTips

Жыл бұрын

Whats going on Kent. If this Caliber use the same connector as that in the video then yes, this would apply. A new updated sending unit and the connector plug removed should do it. Thanks for watching

real MVP solved light by just removing plastic piece without having to replace anything!!!!

@OnlineMechanicTips

3 жыл бұрын

lol, that connector can breath now...Thanks for watching bud. Thumbs up the vid and sub the channel for me, thanks

Thank you for the video. I wonder if that will be same issue for other car makes. I have a jeep compass. It was running fine 3 days ago. I knew it was low on antifreeze, I added it but found oil leaking in the top gasket after driving the car for 20 min, that's when light goes on. Any suggestions Thanks.

I have the same problem on my 2008 Dodge Caliber i will try this thanks

Interesting

Does Ford have the little tab also that needs throwing away? Thanks for sharing this man. My 2000 Ford Windstar light comes on sometimes while sitting in line at the bank or restaurants.

Thank you if I had the tool I would do this myself

When I went to pull it out it was so old that only the square head and a small piece of the shaft came out, the rest of the shaft is still in there. So I still got that annoying bing from the oil light. Question: if it is just causing my oil light to come on periodically bing, can I drive it until I can figure out how to get the rest of that shaft out of there. It is an extremely difficult position to reach and I'm not looking forward to doing it again. Thank you so much for this video. Looking forward to your answer.

Thanks man, would that pin be cause thing sensor to have burned up oil on the ousid of it

Thank you very informative video yes I was quoted $260 , $100 for pile pressure test. $160 for a oil pressure sensor replacement. Its a $15 part they charge $60. Did you shoot this video in selfish mode? Ha ha everything looks backwards on the pt cruiser engine.

I am replacing my 2004 Jeep liberty 3.7 oil pressure switch and going to remove that thing you are talking about.

@OnlineMechanicTips

Ай бұрын

Good deal. Thanks for tuning in. Please remember to thumbs up the video and consider subscribing to the channel.

🔥🔥🔥🔥

Thank you very much for your "inside info" man lol nice to know what's really up. I bought a new sensor for $50 funny how a mechanic would charge over 300 for the part and installation. That's robbery lol. 👍👍

Wow thats crazy dealerships Jerry rig parts vs replacing them. No wonder people keep having to go back fir repairs after a few months.

Hey! Bro your videos pretty useful. Today when I diagnose my car I got few fault codes. I would be so great if you could help me in about.

@qaismehboobi2166

3 жыл бұрын

I can send you the data of diagnosis.

@OnlineMechanicTips

3 жыл бұрын

Yes send it. Also are you subscribed to the channel?

Did watch another one and obviously do it from the bottom and pressure from oil pressure obviously--but removing the pin thing??? Why would it not leak oil then???? Thanks

I just bought a 2008 Dodge Caliber and the oil light would chime and light up whenever I start up the car and come to a stop. It is annoying to hear the chime every time the oil light came on. I now know what to do to fix this problem.