Offset Smoker Build!! 82 gallons!! DIY Texas Style Offset Smoker
Тәжірибелік нұсқаулар және стиль
I built another offset smoker, and it turned out great! The customer wanted the cook chamber length to be 42" and the diameter 24". Built out of 7ga (3/16") thick mild steel. This was a lot of fun and fantastic to cook on! Looking forward to the next build already :)
Thanks for watching!
If interested in a pit hit me up at fabmakebuildcook@gmail.com or DM me on instagram @fabmakebuildcook6274
Build details below.
Main cook chamber: 7ga mild steel, 42" long, 24" diameter
Firebox: 7ga mild steel inner and outer, 24" x 24" outside, 2" insulation on top, bottom, front, and back (Not door or cook chamber side)
Base: 2" x 2" square tubing, 11ga mild steel
Smokestack: 6" mild steel tube, 11ga, 48" tall
Casters: 6" heavy duty, 2 swivel and 2 fixed
Temp gauges: Two Tel-Tru gauges on cook chamber door
Overall length: 7' 6"
Overall height: 6' 8"
Пікірлер: 222
Good to see someone build a smoker from steel other than a propane tank
@noedengineer
Жыл бұрын
Agreed.
@fabmakebuildcook6274
Жыл бұрын
It is nice building with all new components and not having to knock a bunch of rust off!
@cmsense8193
Жыл бұрын
@@fabmakebuildcook6274 hats off to the propane tank fabricators, but I think knowing everything was fabricated from scratch is easier when paying top dollar for quality product.
@fabmakebuildcook6274
Жыл бұрын
@@cmsense8193 Totally get it. There's a very good reason for using propane tanks to be sure. Moberg, Primitive Pits, Centex, and many more turn out some seriously nice units. From scratch quality I would say TMG pits and Shirley Fabrication have some of the nicer units out there. Allen Tubbs does some great work as well.
That is the BEST build I've seen.
Absolutely the best build, I've seen from a man who knows what he doing. Give this man a star on Hollywood Blvd 🙌 ✨️ 👏 🙏 😊
@fabmakebuildcook6274
2 ай бұрын
Too kind! Thanks
The best smoker I’ve seen from majority of KZread videos out there! That thing looks dope and 3/16” cold rolled steel looks fucking perfect
The nicest smoker build on KZread imo
@fabmakebuildcook6274
Жыл бұрын
Thanks dude
I enjoy the content. I am someone who welds in the driveway. Seeing your set up and your content gives me a goal to shoot for. Thank you for making your content.
@fabmakebuildcook6274
Жыл бұрын
Glad you got some joy out of this video
Nice that there is a new and interesting video from you again. 👍
Nice! Building something that heavy by yourself is a challenge. Nice ingenuity! Great work.
@fabmakebuildcook6274
Жыл бұрын
Thanks a lot! The bridge crane was totally worth building. Build video on that coming soon!
Great video and great smoker! Going to build my own soon and this was helpful.
Excellent build and I like the new format. Thanks for sharing your knowledge.
@fabmakebuildcook6274
Жыл бұрын
happy to share :) I like the newer format as well.
Lovely build, neat and classy
Excellent build! Great looking smoker!!
@fabmakebuildcook6274
Жыл бұрын
Thanks Sean!
awesome video what a beast of a smoker
I love how you have a fireball tool square
Awesome work! Really enjoy your videos!
@fabmakebuildcook6274
Жыл бұрын
Thanks Eric!
Wow - smoker goals
Simple yet very nice ! 👌
Great video! Really like the solid build - they should last a lifetime!!
@fabmakebuildcook6274
Жыл бұрын
Thank you!
Great video the best smoker build video I’ve seen and I’ve seen them all.
@fabmakebuildcook6274
11 ай бұрын
Thanks man!!
Beautiful Pit! and nice chimney!!
@fabmakebuildcook6274
Жыл бұрын
Thanks Brad!! The chimney is great. Much better than the 3 Home Depot chimneys I’ve burned through in the last few years 🤣
Very nice video, build and smoker! Thanks for sharing... 😁👍🔥
@fabmakebuildcook6274
Жыл бұрын
Glad you like it!
Amazing! Makes me want to learn how to weld!
Gorgeous smoker and awesome build
@fabmakebuildcook6274
8 ай бұрын
I appreciate that!
NICK! Holy shit man! Great to see you back bro! 👍
@fabmakebuildcook6274
Жыл бұрын
Thanks man! It's been a while for sure. I have a few videos to release still and only need to edit them. Hopefully it won't take another year :)
You’re a really good fabricator !
@fabmakebuildcook6274
Жыл бұрын
Thanks William!
Great video!
Beautiful pit great work sir.
@fabmakebuildcook6274
Жыл бұрын
Thanks AJ!
Hahahahha broskie over here not wearing protective footwear 'n shit. That's the best looking DIY offset I've seen so far online, nice work man.
@fabmakebuildcook6274
11 ай бұрын
Yeah I’m a little loose in the garage 🤣. Thanks man
I weld on industrial size bag houses for air duct systems for manufacturing plants. We weld the seams downhill and it does great at making airtight seams. You should consider welding yours that way. The settings I use for .035 wire is 250 I’m and 20 to 22 volts. You should try that sometime. It would cut down on sanding welds. You could leave the welds and only sand at the starts and stops.
Yeah, where have you been? Good stuff!
@fabmakebuildcook6274
Жыл бұрын
I've been building and recording just haven't compiled the videos yet :) Coming soon!
That is one good looking Smoker.
@fabmakebuildcook6274
Жыл бұрын
Thank you
Awesome build! 🙌 I need to learn how to weld
Great video 🎉
Nice work buddy!
@fabmakebuildcook6274
Жыл бұрын
Thanks dude!
Used those magnets for years. I remember the bosses telling me to use it on a 316 stainless 800lb round disc. I told them. "You try it!" Found out quickly that it will not work on 316. Some stainless grades will but always TEST the lift. Used an electric magnet also. Could not believe that the plant manager didn't realize that unplugging it! The magnet will release!
@fabmakebuildcook6274
5 ай бұрын
Hahahaha! That’s hilarious. Thanks for sharing
Nice work man.
@fabmakebuildcook6274
Жыл бұрын
Thanks Josh!
Wow Wish i had this thing.
Sir You did a great Job. Welds look good and showing your work is Awesome. Practice and Become better at the craft with all things ...
@fabmakebuildcook6274
Жыл бұрын
Thank you!
Awesome pit man! Also, I had no idea a smoker build video could be so satisfying haha
@fabmakebuildcook6274
Жыл бұрын
Glad you liked it Michael!
Your back!!! Sweet build Put a edge on back bottom shelf so logs don’t fall out
@fabmakebuildcook6274
Жыл бұрын
Solid tip. Thank you
Awesome job thanks for the video..
@fabmakebuildcook6274
Жыл бұрын
My pleasure Troy
You have some great skills. Well done.
@fabmakebuildcook6274
Жыл бұрын
I appreciate that Mike! I do what I can.
@mike_ny1
Жыл бұрын
@@fabmakebuildcook6274 I am embarking on my first build, picked up a 250 with the ends cut off. Looking forward to getting started. Definitely picked up some pointers watching your videos.
@fabmakebuildcook6274
Жыл бұрын
@@mike_ny1 sweet! Try to enjoy every minute of it.
Nice build, 👍🏼👍🏼
@fabmakebuildcook6274
Жыл бұрын
Thanks John
she's a beauty. good work
@fabmakebuildcook6274
3 ай бұрын
Many thanks
Good to see you back! I'm building my second pit now
@fabmakebuildcook6274
Жыл бұрын
Thanks! Good luck on your build
@hinds90
Жыл бұрын
@@fabmakebuildcook6274 I started a channel also. Lol it sucks now of course because I've never done anything like this but trying something different. Give it a look if you get time. BullseyePITs
@fabmakebuildcook6274
Жыл бұрын
@@hinds90 Can't seem to find it on KZread yet. Have you published a video yet?
@hinds90
Жыл бұрын
@@fabmakebuildcook6274 yep 5 videos but they're not much to scream home about lol.
@BullseyeMetalWerks
Жыл бұрын
@@fabmakebuildcook6274 howdy. Lol this is the channel
Very nice smoker. Do you make them also?
Great video/build just wish your voice volume was louder nonetheless very educational build I just picked up 120 gallon, 80 gallon, 2-60 gallon compressor tanks. Looking forward to see what you do next happy building.
@fabmakebuildcook6274
Жыл бұрын
Good luck on your builds! Yeah for some reason my microphone volume during the voiceover was low. Super annoying. Will be better next video
Great build! I actually just started building my first pit, same dimensions but I have a 3/8 thick pipe. What size opening did you make from the firebox to the cook chamber?
@fabmakebuildcook6274
Жыл бұрын
Thanks Billy! The opening was roughly 16" wide and 6" deep in the shape of a half circle. Leaving a good lip between the bottom of the cook chamber and the firebox is advisable since it will keep grease from entering the firebox and starting a grease fire. Outside of that I think you have a ton of wiggle room.
Nice work! Looking at setting up a lifting beam in my garage. Would you share some pictures of your setup? Thanks
@fabmakebuildcook6274
8 ай бұрын
Thanks Tyler! No problem. Email me at fabmakebuildcook@gmail.com and I’ll share some pics.
I can see huge difference between this and a $200 50amp elf-cheepo brand. Alot faster and cleaner.
Are you using a 120v welder for all that?
Nice PT shorts your wearing
@fabmakebuildcook6274
Жыл бұрын
The old style!! My favorite. Liner and all my friend
What size expanded metal are you using for grates and racks and such? Not the physical dimensional size of the racks but what you order from the steel provider. Thanks, I also deal with Coremark in Mn.
@fabmakebuildcook6274
Жыл бұрын
Hey Jim, 3/4 x 9 is the expanded metal most commonly used.
Super well done!!! I can't think of anything I would do differently!! Who rolled the cook chamber body?
@fabmakebuildcook6274
9 ай бұрын
Thanks Greg. I had my metal supplier roll the steel sheet for the cook chamber.
Great build. How did you get the rolled steel?
@fabmakebuildcook6274
9 ай бұрын
Thank you. I had my metal supplier roll it for me.
Man this is awesome, would love a 65-gallon! do you do custom builds?
@fabmakebuildcook6274
Жыл бұрын
Yup sure do! Hit me up if interested. Fabmakebuildcook@gmail.com
Certainly have missed the builds and the test cooks. Wondering where the OP went. Hope all is well. Thanks!
@fabmakebuildcook6274
Жыл бұрын
Thanks! The OP?
@stihlmanchainsaw8445
Жыл бұрын
@@fabmakebuildcook6274 Original Poster (author of the content)
@fabmakebuildcook6274
Жыл бұрын
@@stihlmanchainsaw8445 I’m still confused…
@stihlmanchainsaw8445
Жыл бұрын
@@fabmakebuildcook6274 Simply stated a well wish to you. Hoping you are in good health. Excuse the "OP" - should have simply stated it a different way. Thanks for the content, and builds.
@fabmakebuildcook6274
Жыл бұрын
@@stihlmanchainsaw8445 All good man! Thanks
Nice build! I heard you mention the Midwest. Where are you located?
@fabmakebuildcook6274
Жыл бұрын
Thanks! Yup I'm in Minnesota. Minneapolis
About how long did it take from start to finish? Very nice build and your fab skills are on point. Cheers to some sick BBQ
@fabmakebuildcook6274
Жыл бұрын
Thank you! It took between 25-30 hours to build I'd guess. Total timeframe from start to finish was about 2-3 months though due to scheduling conflicts and procrastination.
Magnets only really work when the steel is thick For example that mag clamp probably couldn’t hold its own weight on a kitchen fridge On something 1” thick though it’s a different story
@fabmakebuildcook6274
2 ай бұрын
Yeah I figured that out the hard way. Flex in the plate was the root cause and lack of mass I suppose.
What half-face respirator are you using? Thanks.
@fabmakebuildcook6274
4 ай бұрын
It’s a 3m cheap one off Amazon
Great build, welding needs some work. Metal is too thin for that magnet that's why it fell. Need more meat for it to hold on to.
@fabmakebuildcook6274
10 ай бұрын
Thanks! Yeah that steel sheet was flexing/pulsing due to the chain fall hoist being kind of a turd too. Really choppy operation. With the electric hoist it’s much smoother.
How did you get the braces on the inside of the door before you cut the door open?
@fabmakebuildcook6274
Жыл бұрын
I welded them on the inside before the pipe end was welded in place.
Where did you get the rolled steel for the cook chamber?
@fabmakebuildcook6274
Жыл бұрын
My metal supplier rolled it for me. Coremark metals in Minneapolis.
Quality build. May I ask what kind of insulation you used and where you got it?
@fabmakebuildcook6274
Жыл бұрын
Thanks! It’s a ceramic fiber insulation roll and I buy them on Amazon.
@markskiles3356
Жыл бұрын
@@fabmakebuildcook6274 thanks.
Going to be making my own soon, just wondering how do you determine the size of the cutout from the burn box to the cook chamber? Or how'd you determine the size of the actual burn box?
@fabmakebuildcook6274
Жыл бұрын
Hey Abe, I eyeballed the opening from the firebox to the cook chamber honestly. Not too small and not too large but would err on the side of larger than smaller personally. Make sure you have a barrier between the cook chamber and firebox to avoid grease fires though. The firebox I'd suggest at least 2 feet deep or deeper depending how large of a cook chamber you're going to have. How big are you building?
@abewiebe3438
Жыл бұрын
@@fabmakebuildcook6274 right on thanks for the input! I got 2 pieces of half inch thick pipe, 20" diameter, one is 4' long the other is 3' long. I might end up making 2 smokers we'll see.
@fabmakebuildcook6274
Жыл бұрын
@@abewiebe3438 That's some heavy wall stuff right there! Happy building dude
What steel grade did you use? I'll get my smoker build from 1/4" A36 steel sheet that then will be shaped to cylinder. My main concern is make sure that the steel is food safe since I don't know if that type of steel has a coating that might be non food safe. Do you think A36 is fine? Or not all A36 will be food safe?
@fabmakebuildcook6274
9 ай бұрын
This is 7ga pickled and oiled steel sheet. Once the metal is seasoned it’s completely safe for cooking. A36 hot rolled is the same way. Burn a decent fire in it so it gets around 450f and spray or wipe the inside with some sort of vegetable oil and you’re good to go after a few coats. Washing the metal prior to the fire so all the dirt and crap is off the metal is necessary.
@__-ul7cc
9 ай бұрын
@fabmakebuildcook6274 Yes I was planning on cure the smoker and add pam spray oil to create a protecting coating. Besides curing it, do you think sand blast when the steel sheet is still flat would also help to eliminate impurities and harming agents?
@fabmakebuildcook6274
9 ай бұрын
@@__-ul7cc couldn’t hurt
great build what is the width of the frame
@fabmakebuildcook6274
Жыл бұрын
Thanks John. I think I made the frame width around 23". just narrower than the cook chamber which is 24".
Why welding the whole seam at 1:50? and later having to cut it for the door?
That’s nice how much would a smoker like that cost
@fabmakebuildcook6274
Жыл бұрын
Thanks Jack. This one was around $3k
Is the chamber level or does it drop slightly for the grease drain
@fabmakebuildcook6274
Жыл бұрын
It's relatively level.
Can someone explain the reason for the complicated exhaust thing? Why not just a 90 degree elbow right out of the end of the cook chamber?
@fabmakebuildcook6274
Жыл бұрын
Hey Earl, The collector (complicated exhaust thing) helps move the hotspot outside of the cook chamber. A 90deg elbow does the same thing. A 6” schedule 40 90deg elbow is a bit more expensive to purchase, and supposedly doesn’t do as good of a job with pipe style pits as a collector. That’s what I’ve heard anyways. Plus the collector is fun to build😁
I enjoyed the smoker build and the video. I just wish the audio volume levels were consistent and higher. I had to turn up the volume higher than normal to here your voiceovers then turn down when the ads started. Great video though!
@fabmakebuildcook6274
Жыл бұрын
Thank you! Yeah I really did a bad job on the volume controls on this one. Live and learn right? I appreciate the feedback.
How much did you charge for this exact build? Interested in purchasing one 👍🏼
@fabmakebuildcook6274
Жыл бұрын
I think that one went for $2700… Email me at fabmakebuildcook@gmail.com for accurate pricing if interested please
Did you use bullet hinges on the firebox door and if so how are they holding up to the heat?
@fabmakebuildcook6274
9 ай бұрын
Yup sure did. They hold up great. Used them on the other two offsets as well without issues.
@crowsnestpassbbq8764
9 ай бұрын
@@fabmakebuildcook6274 are they greasable hinges? I’m almost done building my first offset and have greasable bullet hinges on the cook chamber door but was sure if they would hold up to the heat of the fire box. Great video btw 👍
@fabmakebuildcook6274
9 ай бұрын
@@crowsnestpassbbq8764 thanks! Yes I prefer greaseable hinges all around.
@crowsnestpassbbq8764
9 ай бұрын
@@fabmakebuildcook6274 thank you 🙏
What did you use for insulation
@fabmakebuildcook6274
Жыл бұрын
It’s high temp ceramic fiber insulation. You buy it in rolls on Amazon.
Best way to learn to weld with out classes?
@fabmakebuildcook6274
Жыл бұрын
KZread for sure. I learned how to weld/fabricate from youTube. Channels like weldingtipsandtricks, 6061, allens welding and wood working, Jimbo's garage, the fabrication series. So many good ones out there.
Where do you get you steel plate rolled?
@fabmakebuildcook6274
Жыл бұрын
My metal supplier Coremark Metals
Just curious as why you didn’t add an air intake on the door. Or are you just adjusting the door for that. Great build tho
@fabmakebuildcook6274
Жыл бұрын
No "need" for an air intake damper on the door. Wouldn't hurt and might add additional control but is not necessary. Just leaving the door open a bit seems to work just fine. I do have a notch cut out in the door latch that keeps the door in place while open and the fire fed well enough with fresh air. About 1.5" opening. Thanks for watching!
@caseyarmstrong7064
Жыл бұрын
@@fabmakebuildcook6274 yea either way works, just usually see some type of additional air intake. But whatever works. Great looking bbq
@fabmakebuildcook6274
Жыл бұрын
@@caseyarmstrong7064 Thank you. I might try adding some sort of damper on the door next build. Worth giving a go. I know Centex has a cool louvre style damper for their door's intake. Almost looks like an engines throttle body. Aesthetically cool AF. You may have just convinced me....
Nice though those sparks aren’t hitting that shiner .
What would you charge for a smoker just like that one
@fabmakebuildcook6274
Жыл бұрын
$2700 not including shipping.
nick where in Minnesota are you located
@fabmakebuildcook6274
Жыл бұрын
Hey Guy. I'm in Minneapolis
What was the cost for rolling the main chamber?
@fabmakebuildcook6274
Жыл бұрын
I think it was around $600 for the sheet and to have it rolled.
What kind of wire your using?
@fabmakebuildcook6274
Жыл бұрын
.030"
How much did the steel cost with current prices?
@fabmakebuildcook6274
Жыл бұрын
Close to $2k. Maybe a little less.
Like the video,how much is the price on this smoker
@fabmakebuildcook6274
Жыл бұрын
Thank you! I think this one went for around $3k.
@willemkuhn8678
Жыл бұрын
@@fabmakebuildcook6274 I'm from Namibia and i love your videos and also smoking build myself one out of scrap, work nice but i want to step up,can you send some mor info on this smoker
@fabmakebuildcook6274
Жыл бұрын
@@willemkuhn8678 What information would you like?
Do you have a tool that rolls your steel?
@fabmakebuildcook6274
Жыл бұрын
No i have it rolled at my metal supplier.
Where do you source the pipe? I can't for the life of me source a 20" diameter pipe.
@fabmakebuildcook6274
Жыл бұрын
I had my metal supplier roll a sheet of 7ga (3/16") steel for me. It is a bit expensive, but my only real option for pipe around here as well.
@DrewTerror
Жыл бұрын
@@fabmakebuildcook6274 I just did the same today. Couldn't source anything. Going to be making my first cooker soon!
@fabmakebuildcook6274
Жыл бұрын
@@DrewTerror Have fun with the build!
Do you do private builds
@fabmakebuildcook6274
Жыл бұрын
I do from time to time.
Dang I wish I could hear this
@fabmakebuildcook6274
Жыл бұрын
Yeah the audio is crap. I might rerecord the voice over and re-publish.
that was almost bad, when the magnet let go
@fabmakebuildcook6274
Жыл бұрын
I know right!? Super sketchy.
Hi sir I know this video was posted a year ago but I was wondering if you sell your setup ? Is if so Let me know how I can reach you
@fabmakebuildcook6274
7 ай бұрын
Hey Gerald, You can reach me at fabmakebuildcook@gmail.com I’m finishing up a very similar unit within the next couple of weeks that will be available.
What are the dimensions on that bad boy!
@fabmakebuildcook6274
Жыл бұрын
Main cook chamber is 42" long and 24" in diameter. 3/16" thick mild steel. Smokestack is 6" diameter and 48" tall. 11ga mild steel.
can i make order?
By what I have seen out there that's a $5k grill.
@fabmakebuildcook6274
5 ай бұрын
Not quite but I appreciate the compliment 😁
Are you a veteran, Army?
@fabmakebuildcook6274
Жыл бұрын
Yup. National guard MN
which is the diameter
@fabmakebuildcook6274
Жыл бұрын
24"
When I built mine I wasn't too concerned about the square tubing I just stuffed the tubing with insulation I had left over
@fabmakebuildcook6274
Жыл бұрын
Not a bad idea
8:28 Salut ✋ J’aimerai avoir les mesure 📏 de ta conception four si possible.
@fabmakebuildcook6274
Жыл бұрын
They are detailed in the video description. Basic measurements are 24" diameter x 42" length for the cook chamber. Firebox is 24" x 24" with 2" of insulation. Hope this helps!
Não sei se isso é cultural ou se eles são despreocupados mesmo, sempre vejo vídeos gringos e a gera se preocupa muito pouco com EPI, por que será? Várias situações de quase acidentes no vídeos, apesar do trabalho excelente, parabéns
@fabmakebuildcook6274
Жыл бұрын
No hay problema. No sé si es cultural, pero si sucede algo mientras se trabaja en el taller, creo que es beneficioso resaltar lo que salió mal para que otras personas puedan evitar ese escenario si deciden intentar reproducir lo que se está construyendo en el video. ¡Gracias por ver!
@aderlonms
Жыл бұрын
@@fabmakebuildcook6274 thanks for the explanation, here in Brazil the culture of safety at work is very strong, and we videos in which people build things or professionals who teach techniques, everyone always observes the use of safety equipment and proper clothing, my profession, I'm an electrician, it is very strict about using safety items, hope that is clear, thank you and happy new year
@fabmakebuildcook6274
Жыл бұрын
@@aderlonms All good man. Safety first