Ode Brew Grinder Gen 2: How to prevent your burrs from binding
Тәжірибелік нұсқаулар және стиль
Ever feel the knob of your Ode Brew Grinder get stuck when turning from a much coarser grind to a finer one? This how-to video will show you how to prevent the burrs of your Ode from binding.
Shop Ode Gen 2: fellowproducts.com/products/o...
Shop Gen 2 Brew Burrs:
fellowproducts.com/products/o...
This way to a brighter, less boring morning ⤵️
Shop Fellow.
fellowproducts.com/
We're on Instagram!
/ fellowproducts
Пікірлер: 20
V helpful! Was just noticing this after grinding for cold brew. Thank you!
Just found this video while not even looking for it and I can say that this method is exactly what I figured out on my own. It's still great that there is a video for this.
Always a good idea regardless of manufacturer. Bravo.
THANK YOU! This is so helpful! I just received my beautiful Gen 2 with the upgraded SSP MP burr set 2 days ago and I was so worried that there was something wrong. Best!
I love this product. Thank you
What a great insight! I was wondering why there was added resistance going from coarse to fine after.
Thank you! I have this problem with gen 2 and ssp and I thought there was something wrong with the grinder.
Thank you for this! I had this exact issue and contacted support and they had no clue how to fix it or that it was even a problem.
How long will the grinder run without beans and is there enough time running it again to do this after a grinding session finishes? I am going to get an Ode, and would like to do that as that is what I always do with my current grinder to clear any partial beans that might still be in the grinding chamber - after it finishes with the beans, I turne it down near its finest settings then back up to where I normally grind. About a third of the time, it will grind some last bean after it turn it finer in this process.
Oh lmao. I literally just recalibrated for no reason then, and then found this video
if the burrs still bind with the motor on what can be done?
I felt that when I first bought my fellow ode gen 2 and neglected that dial getting stuck, is it harmful for the grinder? because lately I feel like the level 5 grinds for the V60 grain size became smaller.
How often do you need to clean the burrs?
@FellowProducts
Жыл бұрын
Check out the FAQ's on our website!
Does this apply to ode 1?
@FellowProducts
Жыл бұрын
Absolutely! Let us know if you have any other questions - we're happy to help.
What grind setting for moka pot?
16 күн бұрын
Start at 3 and see if you need finer or coarser 🙂
I really forced my dial to go finer one day… 😬 did I hurt the grinder?
@FellowProducts
Жыл бұрын
Hey akajambas! Please send an email over to hello@fellowproducts.com so we can offer in depth assistance here :)