Nvidia 1080ti ZOTAC Mini fan change & thermal paste upgrade
This is the video where i changed the fans & thermal paste on my son Nivida 1080ti GPU unit.
That's it!
Recorded with GoPro 7 Black V1.90 2.7k 60fps Hypersmooth on & GoPro Software Editor!
This is the video where i changed the fans & thermal paste on my son Nivida 1080ti GPU unit.
That's it!
Recorded with GoPro 7 Black V1.90 2.7k 60fps Hypersmooth on & GoPro Software Editor!
Пікірлер: 17
Hi. What's the thermopads are you using? 1mm or 1,5 mm? What's brand?
Wonderful post, just tutorial I needed. Wanted to ask, does both fan spin similarly at equal rpm. At full throttle my right fan lately seems to spin slower than the right side (the big fan), although there's no sounds or vibrating. Not sure if that's normal or not, and temp seems to lately been hitting 84 - 85 full load. Appreciate the reply and thanks for the vid
Great video, replaced fans today, thx
@TargetingXmod_RC
Жыл бұрын
ok, glad to know! thanks!
what are the arctic silent fans you were talking about? any links to the fans you bought or for the artic ones?
@TargetingXmod_RC
2 жыл бұрын
Search this: Artic Cooling F12 silent...or F8 silent... :)
Good
@TargetingXmod_RC
3 жыл бұрын
Thanks!
How did you get the back panel to open at 1:50ish. I’ve taken out all the crews but it won’t pop out. Does the fan part have to off at that stage?
@TargetingXmod_RC
7 ай бұрын
From what i remember once the screws are out, it's only the thermal paste that holds it! It could need a little front and backwards or left and right movement...then it gets out!
@Peinesss
7 ай бұрын
@@TargetingXmod_RCI managed to pull out one of the fan sockets but it goes back in. However the pc now doesn’t display properly. Do you think that’s the issue or a thermal paste issue?
How did it go with thermals?
@TargetingXmod_RC
2 жыл бұрын
Changed it and never look back! Still working todays...fine!
@wudzah
Жыл бұрын
@@TargetingXmod_RC these cards tend to run hotter due to their small size. 80+ is normal for these cards at 100% usage. They're limited to 83 degrees, this is when they start throttling.
Man :( .. but im so afraid that i will break it , smae issue.
@TargetingXmod_RC
Жыл бұрын
Just do it! But first know what you are doing...it's just unscrew screws! Not rocket science!