Recently I found my High Grade Oxide Quartz right in the middle of the sulfide zone. I seen all the sulfur ore on the hill. The hole it came from the mine collapsed. All the mine walls they needed to support the tunnel had gold they couldn't take long ago. But the big chapel area collapsed and expose those walls that they could never get too. I look for the flat rock, breaks flat and oxides you teach. I hammered away at one of those areas that looked different from the pyrite areas. 8 inches behind found the main gold Vein they were chasing. They say the vein pinches out. But it does that at every fracture. So you hide the gold when the vein pinches out, so next time you can work the same area, because you know where the vein pinches out. I did the chemistry 3 teaspoons of that stuff, no concentration. Lots of gold. Lots of silver. The GRH channel how to get silver. The silver chloride that comes out with dilution also drops some gold with silver. You get the silver chloride and dry it. Then add sulfuric acid to cover the material and add an iron nail 16 penny. Boil in acid 30 minutes and wash acid from material several times. Then melt. I tried nitric and salt. Didn't work. Acid too strong. Gold from rock takes lots of acid because silver requires more acid. When test gold test looks like nothing. There's lots of gold though, acid too high to test. Oxidizer too. Boil solution down to test, test gets darker, if disappear oxidizer still there. Keep boiling like denox, add hcl if you have too. If test again and doesn't disappear solution is ready.

That land is a lot easier to assay, than it is up here. You are definitely on the path of discovery, and it's fun to watch.

Hi professor, don't care about internet trolls, because there are always jealous people for popular and knowledgeable people, your work and your country is great, have a nice day, professor.

Thank you teacher, may you always be healthy.

99% of the gold in the world is coming from quartz . When you find quartz Look for gold veins in the quartz that are yellow in color, and the lower you go with the gold vein, the higher the gold percentage.

Nice video sir.

Cool video

You good testing rock ,tank you sir

l hope you can make vidio how to recovary telluride gold dore.... thank you sir.

@myadventure7069

9 ай бұрын

Send to me little pace of telluride ore I want to see

@afriansyah1468

9 ай бұрын

@@myadventure7069 l think you have ever see telluride gold ore material, but why you don't take gold from it......

Beautiful small stone and it produces gold for you. But is it possible to make video for us of a large rock of the same type found at the river?

@myadventure7069

9 ай бұрын

I have videos in the beginning

@myadventure7069

9 ай бұрын

Ok I make one

@alaaaldin3354

9 ай бұрын

Thank you. Waiting ur video

That rectangle quartz and perpendicular straight line.indicate there's minut lead mineral in that quartz.

@myadventure7069

9 ай бұрын

Lead is ewriwhere , but my gol is to recover gold . Leiter I do refining

@somsackvongsa7077

9 ай бұрын

@@myadventure7069 that also indicated gold is there or close by.

Sodium nirite of course is the best for leach 😊😊

🌹🌹🌹🌹🌹

Bravo

Hi, i am using sodium nitrite and hcl for test my material in small amount, after solution stop producing bubbles, i put urea and after that i put sncl but the color of my solutiin didnt change to white or purple. Is there something i miss? Help me please😅 My sncl i test with AR solutiin it work fine.

@myadventure7069

9 ай бұрын

I can tell you one thing there no gold or silver in your solution . Cement ewrithing with aluminum and boil that cemented powder in hidrochloric acid and look for color . If there is gold powder must become brown color if color looks like copper that you have copper

@mohdsobri9977

9 ай бұрын

@@myadventure7069 thanks for your reply upon my situation.. But i now have smb and iron sulfate. Can i use either one of those?