NON-MANDREL ROTARY TUBE BENDERS CC60 AND CC90 CNC NARGESA
Ғылым және технология
We display of how to make railings, bend square tubes, different ways of calculating tube developments, etc.
#tubebender #cnc #machine #nargesa
🙌🏻 See product on our website:
1. Non-mandrel tube and pipe bender CC60 CNC: nargesa.com/en/industrial-mac...
2. Non-mandrel tube and pipe bender CC90 CNC: nargesa.com/en/industrial-mac...
We display of how to make railings, bend square tubes, different ways of calculating tube developments, the manufacture of several parts for different applications: bicycle parking, stainless pool handrails, Can-am buggy window frames, boat handrail, bed bases, bumper for 4x4 car... advantages of the 4.0 technology, the offset head, the right and left turn switch, the use of the two-axis positioning stop, how to set up the different dies for an accurate bending, the endless CNC applications...
The new generation of CC60 and CC90 Non-mandrel tube and pipe benders can bend up to 180º curves on hollow profiles ensuring the best bent finishes in today’s market. Equipped with a Touch Screen control grant the user interactaction with the standard features offered using the latest 4.0 technology. The sleek look, versatility and faster bending speeds also allows us to have one of best machines offered in our industry. Materials can be round, oval, square, rectangular and made of different metals such as steel, aluminum, stainless steel, copper...
CC60 · Maximum size on S275 round steel pipe: 60.3 mm or 2” Schedule-40 or 2" 1/4 x 4 mm.
CC90 · Maximum size on S275 round steel pipe: 88,9mm or 3” Schedule or 3” Schedule-40 or 3" 1/2 x 6mm.
The mandrel-less tube and pipe bending machines Nargesa are perfect for making curves with a constant quality for pipes, tubes, square bars, rods and other profiles.
Maximum angle of curvature: 180º
Minimum radius of curvature: 3 times the pipe diameter.
Repetition on the curve of +/- 0.1 degrees
Reinforcement tool post support arm for pipes with diameters over 40 mm included.
400 ml BEND 8 lubricant included.
Two bending directions, right or left for easier bending.
Quick die change over: Maximum 60 seconds.
4.0 Technology
CNC control with 7” touchscreen with more than 20 different languages
Safety pedal to the right and left.
Side shelving to store tools.
All bend dies are made of tempered steel for longer tool life.
The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.
Stores up to 10,000 programs.
Up to 50 different angles on the same piece can be programmed.
Dimensions can be programmed in inches or millimeters.
Pivot system with automatic unlocking to help remove material.
Automatic and programmable spring back correction.
Automatic unlocking
Automatic and programmable springback
Offset head for complex parts.
Reinforcement tool post support included
NON-MANDREL TUBE AND PIPE BENDER CC60 CNC
Maximum size on S275 round steel pipe: 60.3 mm or 2” Schedule-40 or 2” 1/4 x 4 mm.
Maximum size on aluminum pipe: 60.3 mm x 8 mm / 2.375” x .315”
Maximum size on stainless steel pipe 304 / 316: 60.3 mm x 3 mm / 2.375” x .160”
Maximum size on square tube: 40 x 40 x 4 mm / 1.50” x 1.50” x .160”
Automatic rotation speed from 1,1 up 3,5 rpm
Maximum radius of curvature: 320 mm
Motor power: 1.1 KW / 1.5 HP.
Electrical voltage: 230V single phase 50/60Hz
Optional voltage: 110V single phase 50/60Hz
Intensity: 4.5 A
Machine weight: 360 Kg / 794 Ibs
Music used:
Action Trailer - Short J 2 by aurasonic © 123RF.com
Nothing But Prepare War by soundbounce © 123RF.com
+INFO
Prada Nargesa S.L.
Manufacture and sale of industrial machinery
nargesa@nargesa.com
Tel. (+34) 972568085
www.nargesa.com
Пікірлер: 123
One of the most detailed demo videos of such machines which helps anyone understand the machine capabilities & ease of operation...kudos Team Nargesa
@Nargesa
4 жыл бұрын
Thank you very much for your message @Srikanth Bandla. I will congratulate the entire Nargesa team on your behalf!!
@AhmedAli-dz2ce
3 жыл бұрын
@@Nargesa ممكن اعرف سعرها هذه الاله
@Nargesa
3 жыл бұрын
@@AhmedAli-dz2ce please send an email to nargesa@nargesa.com and our sales department will make you a quotation
Love the vintage motos in the back of the shop too!
@maneki9neko
3 жыл бұрын
I missed those on first viewing. Yes. Drum brakes. And a two stroke. So vintage. I think that I see a Montessa Impala back there. They have a distinctive front fork design. The lower tips of the forks descend below the axle about 750 mm. Plainly these are people who love machinery.
@Nargesa
3 жыл бұрын
@@maneki9neko Yes, it's a Montesa Impala !! Mr. Jaume Prada, founder of Prada Nargesa, is a fan of vintage motorcycles! He buys and restores them to display in our Showroom.
Muy lindo y practico saludo desde Argentina👴🏻
@Nargesa
4 жыл бұрын
Gracias por su comentario @Juan Gallardo. Saludos a Argentina
Es increíble, me encanta. Saludos desde Argentina
@Nargesa
4 жыл бұрын
Muchas gracias por su comentario @Matias Hector Bustos. Si desea mas información puede contactar con nuestro departamento comercial enviando un email a nargesa@nargesa.com. Saludos a Argentina
@elpupusero
4 жыл бұрын
@@Nargesa una pregunta, porque en su website no estan los precios de las maquinas?
@Nargesa
4 жыл бұрын
@@elpupusero saludos. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le atenderá personalmente. Le harán la cotización del equipo y del transporte, le enviarán la ficha técnica y le asesorarán en todo lo que necesite
Extremely Beautiful machine for tube bending operation 💐💐✍️👍👍👌👌🙏🙏
@Nargesa
2 жыл бұрын
Thank you for your comment!!
Most precise bending machine and elaborate video i have watched. I need and want one
@Nargesa
Жыл бұрын
Thank you very much for your comment! Please send an email to nargesa@nargesa.com and our sales department will assist you. Best regards
Fascinating.... Without question, your design team is genus. Great job on the explanation as well, the text flows well with the video. 0.01745! :) Coolest company in Spain!
@Nargesa
4 жыл бұрын
Thank you very much for your message @Ted Mcaleer! It is an honor that you can collaborate with us. Excellent job, as always 😀
@kimi90ist
3 жыл бұрын
0643940543
@Nargesa
3 жыл бұрын
@@kimi90ist Hello, please send an email to nargesa@nargesa.com and our sales department will assist you
Marks on the tube and the beginning of the bend are called "Tangent Points" Nice video
@Nargesa
Жыл бұрын
Thank you for your comment!
👍👍👍💕
Your rotary draw dyes are much better than eroclina's..
@Nargesa
3 ай бұрын
Thank you very much for your comment! Our R&D department works hard to be able to offer effective solutions to all our customers. Best regards
Very helpful video. Are any of your machines in use here in Los Angeles? Southern California?
@Nargesa
3 жыл бұрын
Thank you for your message! Of course, there are Nargesa machines in use here in Los Angeles. Please send an email to nargesa@nargesa.com and our Dealer in USA will assist you
i wanna buy that for car exhaust pipe bending! haha!
@Nargesa
4 жыл бұрын
@JamesPark_85, please send an email to nargesa@nargesa.com and our sales department will assist you
Me gusta
@Nargesa
5 ай бұрын
Gracias por su comentario!!
Very nice machine! Have only had a few test bends. A question: K factor, what is that? Is it the same regarding pipe material/diameter?
@Nargesa
Ай бұрын
Thank you for your comment!! The k-factor relates the neutral axis to the thickness of the material. The key is to know where the neutral axis passes, but it depends on a few different variables, such as material type and material thickness, etc. It means you have to calculate it when you do a bend and you have to do bending tests to take measurements. We use this factor for this material k-factor = 0.01745, because it gives you reliable results without the need for testing. Ultimately you have to perform bending tests and recalculate the development, this factor will be repeated if the material is the same. Please contact us if you have any questions Best regards
hard working making this video, but definatey worth it.
@Nargesa
4 жыл бұрын
Thank you @Mario Esr
Soy de Ecuador cuánto vale la máquina esperó que meden repuestas
@Nargesa
4 жыл бұрын
Saludos @Fernando Cedeño. Por favor envíe un email con sus datos a nargesa@nargesa.com y nuestro departamento comercial le hará la cotización de este equipo, con el transporte a Ecuador
Para doblar tubo (tubing) 180° ,OD 2" x 2.77 mm espesor , ratio 2.8. Se puede fabricar esa máquina
@Nargesa
2 жыл бұрын
Agradecemos su comentario señor Orta. Para estas dimensiones que dice usted podría utilizar cualquiera de los dos modelos que fabricamos, la CC60 o la CC90. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le atenderá personalmente
I wish I could get one that fell out of a truck for cheap!!
@Nargesa
2 жыл бұрын
You could sit and wait until one of those falls out of the truck, but it would be wait faster if you email us at nargesa@nargesa.com. We'll handle your request and for sure "the truck" will pass by your facilities soon
قمة في الاداء، هل يوجد لكم وكيل معتمد في الجزاءر
@Nargesa
4 жыл бұрын
Bonjour @azdin Batna. Nous avons un distributeur agréé en Algérie, la société SARL COCOM. Veuillez envoyer un e-mail à nargesa@nargesa.com et notre service commercial vous aidera
@azdinbatna7163
4 жыл бұрын
Batnaazdin29@ gmail.com
@Nargesa
4 жыл бұрын
@azdin Batna Le distributeur Nargesa agréé en Algérie vous contactera sous peu
@azdinbatna7163
4 жыл бұрын
@@Nargesa صباح الخير للجميع .عنوان الموزع في الجزاءر لم يصلني بعد
@Nargesa
4 жыл бұрын
@azdin Batna Le distributeur vous enverra un e-mail dans les plus brefs délais
Tendrá una onladoeq para tres pulgadas sin mandril
@Nargesa
2 жыл бұрын
Por favor envíe un email a nargesa@nargesa.com especificando cual es la máquina que necesita y le atenderemos personalmente
Saludos de bolivia el costo y el envio como se ase por fabor y en donde adquerirlo
@Nargesa
4 жыл бұрын
Saludos @Roca Angulo. En Bolivia hacemos las ventas directamente desde nuestra fábrica en España. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le informará
can i get a catalogue of their prices please
@Nargesa
3 жыл бұрын
You may follow this link to see and download the catalog of all machines and accessories we manufacture. If you need a quotation, please kindly indicate your details (company name, email, phone, city and country) and our Sales team will assist you shortly www.nargesa.com/sites/default/files/catalog-nargesa-2020_1.pdf
How much is the machine if exported to Phippines ?
@Nargesa
3 жыл бұрын
Hi Mr. Josue. Yes, of course, we export to Philippines. Please send an email to nargesa@nargesa.com and our sales department will make you a quotation
@josuedeasisjr2140
3 жыл бұрын
@@Nargesa thank you Sir.
Donde obtener precios e información?
@Nargesa
4 жыл бұрын
Saludos @Javier Carlos Ribas Van Ostende. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le enviará la ficha técnica y le hará la cotización de estos equipos
??? it will how much cost of one machine 💸?
@Nargesa
4 жыл бұрын
Hi @Abu Basar. Please send an email to nargesa@nargesa.com and our sales department will assist you
hii, how to calculate k-factor thankyou
@ahmadmuqorrobin8784
Жыл бұрын
sorry k=0.01745 is 1 degree right
What is price this machine I like it
@Nargesa
4 жыл бұрын
@shaadab ansari please send an email to nargesa@nargesa.com and our sales department will make you a quotation
How much does cost it ?
@Nargesa
4 жыл бұрын
Hi @giuliano gianella. Please send an email to nargesa@nargesa.com and our sales department will prepare a quote for you
Me interesa
@Nargesa
4 жыл бұрын
Saludos @adan salas de la torre. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le atenderá personalmente
Boa tarde você pode me passa o preco
@Nargesa
4 жыл бұрын
Bom Dia @Pedro Alves. Envie um email para nargesa@nargesa.com e nosso departamento comercial fará o orçamento
Precio.colonbia. y de que dismetros van
@Nargesa
Жыл бұрын
Hola señor Moreno, por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le hará la cotización
i want if not made in chaina
@Nargesa
4 жыл бұрын
Hi @Deelip Tamshete. We manufacture all Nargesa machines in our factory in Spain
request to buy one unit
@Nargesa
6 ай бұрын
Hi! Please send an email to nargesa@nargesa.com and our sales department will send you a catalog and we make you a quotation
Precio $ Colombia
@Nargesa
4 жыл бұрын
Saludos @Fabio Zamora. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le hará la cotización de estos equipos
How much prices in Bangladesh
@Nargesa
Жыл бұрын
Hi, please send an email to nargesa@nargesa.com and our sales department will make you a quotation
Very nice machine please your address
@Nargesa
4 жыл бұрын
Thank you for your message @Mukesh Chaurasiya. Please send an email to nargesa@nargesa.com and our sales department will assist you
@munhariadhikari3120
4 жыл бұрын
could you please send me quotation at munhariadhikari34@gmail.com
@Nargesa
4 жыл бұрын
@@munhariadhikari3120 our sales department will send you a quotation as soon as possible
know me the price of this machine?
@Nargesa
11 ай бұрын
Hi! Please send an email to nargesa@nargesa.com and our sales department will make you a quotation
Combien coûte cette machine
@Nargesa
4 жыл бұрын
Veuillez envoyer un e-mail à nargesa@nargesa.com et notre service commercial vous fera un devis
What this macine praice
@Nargesa
4 жыл бұрын
Hi @Ashvani Kumar. Please send an email to nargesa@nargesa.com and our sales department will make you a quotation
box ben mesin price in bangladish
@Nargesa
2 жыл бұрын
Hi Mr. Sheikh, please send an email to nargesa@nargesa.com and our sales department will assist you
CC60 ROTARY TUVE BENDERS CNC PRICES
@Nargesa
3 жыл бұрын
Hi Mr. Rahim, please send an email to nargesa@nargesa.com and our sales department will make you a quotation
اريد رقم لتواصل معكم.
@Nargesa
Жыл бұрын
Hi, you can contact us by phone at +34 972568085 or by email at nargesa@nargesa.com. We will assist you!
Plz make a pipe cutting die
@Nargesa
4 жыл бұрын
@Shoaib Saifi, sorry we don't manufacture pipe cutting die
CC 60 PRICE
@Nargesa
4 жыл бұрын
Hi @veselin mihalev. Please send an email to nargesa@nargesa.com and our sales department will make you a quotation
indian price?
@Nargesa
6 ай бұрын
Hi, please send an email to nargesa@nargesa.com and our sales department will make you a quotation for shipping to India
هل.يوجدوكيل.في.اليمن
@Nargesa
3 жыл бұрын
Hi Mr. Alwosapi. In Yemen we sell directly from our factory in Spain. Please send an email to nargesa@nargesa.com and our sales department will assist you
@mohammadalwosapi5049
3 жыл бұрын
@@Nargesa اكتب.العنوان.نالعربي.
@Nargesa
3 жыл бұрын
@@mohammadalwosapi5049 الرجاء مراسلتنا عبر البريد الالكتروني nargesa@nargesa.com مرفقا بالاسم و اللقب و العنوان الشخصي
بكام لو سمحت ممكن اعرف
@Nargesa
8 ай бұрын
Hi! Please send an email to nargesa@nargesa.com and our sales department will assist you
PRICE PL.
@Nargesa
3 жыл бұрын
Hi Mr. Singh, please send an email to nargesa@nargesa.com and our sales department will make you a quotation