Moved into a home that had exact same unit for the front yard. I followed the instructions to turn on the station manually, and the display screen did nothing. Nada, zip, ain't happening.' So I bought an inexpensive lawn sprinkler. Simple, just screw onto the hose and turn on the water.

@flyby9741

5 жыл бұрын

I am about to do the same thing!

@Hunter_Industries

28 күн бұрын

Please contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request

I follow these instructions exactly from this clip and the manual. My sprinkler System will not manually turn on any other station besides station one. Got any tips? thanks very much

@Hunter_Industries

2 жыл бұрын

Thank you for contacting Hunter Technical Support. There could be a few reasons that one of the zones is not operating correctly. Please see some of these suggestions below: • Turn off main system water supply • Replace solenoid • Must use Hunter DC Latching Solenoid (P/N 458200) or other compatible DC latching solenoid. Locate a dealer here if necessary. Other compatible solenoids listed in this support section. • Wiring may be backwards. Black should always lead to the common terminal and red to the station terminal. • Turn water supply and preform manual test. Our support team can also help. Please email support@hunterindustries.com for additional assistance.

Hi there!!! I bought this and love it, but having an issue hopefully you can answer. Is it possible to manually turn on all stations at once???

@aaronleboutillier

6 жыл бұрын

integratyper1 same question here

@JoseRivera-xo9ok

6 жыл бұрын

integratyper1 no only one atation at the time

@Hunter_Industries

28 күн бұрын

Jose is correct, the NODE battery controller runs one station at a time.

can this controller and a low flow valve be rigged up to a rain barrel and work effectively or would there be pressure issues opening and closing the valve? of course with drip line and emitters in mind.

When I go to turn my sprinkles on manually the screen counts down and then just goes blank and nothing happens. Anybody know what may be causing this?

@Hunter_Industries

2 жыл бұрын

Sounds like a glitch. Use the link below to learn how to perform a reset on the controller. That should fix it. www.hunterindustries.com/support/node-resetting-and-clearing-controllers-memory

@thugnasty5242

2 жыл бұрын

@@Hunter_Industries I just saw your response. I have reset the node and it’s still not working. When installed last summer it worked fine. I left it on off mode during the winter and didn’t change anything. Now that I’ve wanted to turn it on again it doesn’t turn on. I only have one zone. It blinks once or twice and instead of firing the water it shuts off. Batteries are working fine. It’s been a nightmare trying to solve this. I need to do a backflow test on my home so I’m hoping it’s something simple related to the water pressure

Doesnt work for NODE -400

@Hunter_Industries

28 күн бұрын

Take a look at the product guide here: www.hunterindustries.com/sites/default/files/OM_NODE_dom.pdf or contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request