The Festool conturo edge banding machine, used with the mfk700 trim router. Here are the links- Festool conturo- amzn.to/3WmgfsU Mfk700 router- amzn.to/3OtvfmQ
Жүктеу.....
Пікірлер: 13
@dahut3614 Жыл бұрын
What, no $81 Festool scraper?
@AnthonyScolaro1
Жыл бұрын
Not needed in my opinion
@juanmallqui9309
10 ай бұрын
@@debandmike3380 time is money. if you are a cabinet maker and you can edgeband with this tool in a fraction of the time it takes to use an iron, its a no brainer.
@JV-cu3tx
9 ай бұрын
if you are a cabinetmaker, you are using actual edge banding machines. @@juanmallqui9309
@smooth_ops2942
9 ай бұрын
@@juanmallqui9309hope the time you save is worth the $6000 for all that edge banding equipment. A hot iron and pre glued edge banding can be done pretty quickly if you have done alot of it 👍🏻.
@AnthonyScolaro1
9 ай бұрын
@smooth_ops2942 I do over 5000 feet of edge banding per year, you’re not doing that with an iron and making any money my friend.
@Pimpmedown10 ай бұрын
today i had to edge with 2mm Walnut. That was a big fail. I kept cracking because the outlets direction is too steep for hardwood. 1mm oak is fine but 2mm is getting a big pain. lots of sanding afterwards to get a smooth edge
@zubersmail8034
6 ай бұрын
❤
@isaivlog52725 ай бұрын
3000 $ for this 😮
@AnthonyScolaro1
5 ай бұрын
I’ve had it now for about 2 years and ran almost 10,000 linear feet of edge banding and yes it’s worth every penny.
Пікірлер: 13
What, no $81 Festool scraper?
@AnthonyScolaro1
Жыл бұрын
Not needed in my opinion
@juanmallqui9309
10 ай бұрын
@@debandmike3380 time is money. if you are a cabinet maker and you can edgeband with this tool in a fraction of the time it takes to use an iron, its a no brainer.
@JV-cu3tx
9 ай бұрын
if you are a cabinetmaker, you are using actual edge banding machines. @@juanmallqui9309
@smooth_ops2942
9 ай бұрын
@@juanmallqui9309hope the time you save is worth the $6000 for all that edge banding equipment. A hot iron and pre glued edge banding can be done pretty quickly if you have done alot of it 👍🏻.
@AnthonyScolaro1
9 ай бұрын
@smooth_ops2942 I do over 5000 feet of edge banding per year, you’re not doing that with an iron and making any money my friend.
today i had to edge with 2mm Walnut. That was a big fail. I kept cracking because the outlets direction is too steep for hardwood. 1mm oak is fine but 2mm is getting a big pain. lots of sanding afterwards to get a smooth edge
@zubersmail8034
6 ай бұрын
❤
3000 $ for this 😮
@AnthonyScolaro1
5 ай бұрын
I’ve had it now for about 2 years and ran almost 10,000 linear feet of edge banding and yes it’s worth every penny.
@crownmoldingbyspectaculart941
25 күн бұрын
@@AnthonyScolaro1Love mine