Cabinetry Basics: Edge Banding with the Festool Conturo
"What's next?" It's time for edge banding! Sedge walks us through the edge banding process for our first cabinet build. We learn about different types of edge banding, trimmers, tools, and more. If you've ever asked yourself, "how do I edge band," "what is edge banding," or "what is a Conturo," then you're in the right place. Let's have some fun and learn together, and as always... Be Positive and Stay Sharp!
Tools Used:
CONTURO Edge Bander: bit.ly/2XF9zZr
CONTURO Trimming Set: bit.ly/3oNWt8b
MFK 700 Edge Router: bit.ly/2XEWE9Z
Chapters
0:00 Intro
1:27 Figuring out edge banding length
2:25 Apply edge banding
6:40 Clip edge banding
8:10 Trimming edge banding
12:31 Selecting grain for the inside of the cabinet
16:10 Setting groove depth
17:20 Run parallel guide
#Festool #Conturo #EdgeBanding
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear
Panasonic 4K Ultra HD: amzn.to/3pXXPzX
Rode VideoMic GO : amzn.to/3vXOJqx
Sony MDR7506 Headphones: amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card: amzn.to/3i0iT4u
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Derick “Big D” Clements who has NO CLUE about woodworking but is ready to learn. Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...
Пікірлер: 30
The file trick was absolutely the best! I even tried it after watching your video and it was amazing. Best results yet! Thanks!
@sedgetool
Жыл бұрын
Glad it helped!
Ya'll are a hoot! Loving this progress!
@sedgetool
3 жыл бұрын
Thanks Ben .... Just warming up .....Hope you are doing well !!!!
Nice demo thanks for your time showing the usage of Festool tools so that the novice too expert can understand. Watching a Festool informercial aka training video from Festool is over complicated. You put the simple usage into every video you do.
@sedgetool
3 жыл бұрын
Glad it was helpful! Thanks for watching !!!!
Awesome video! I'm getting ready to pull the trigger on buying one and this seals the deal. Thanks for all the videos, tips, and free education that you share Sedge! Or should I say Muppet :)? Love the podcast as well.
@sedgetool
2 жыл бұрын
Right on !!!!!!!! Thanks !!!!!
Good video, hard to find much info on the conturo. You can do edge banding without sure but after I got the 700 router it really does produce better results. Do you find better results with the conturo? Seems like more of a speed thing vs the finishing process.
@sedgetool
2 жыл бұрын
MFK 700 makes the process sooooo easy.....
@carbb5760
2 жыл бұрын
@@sedgetool not only easy but you get much more precise results vs file and sand or removing with a chisel. I’m assuming the conturo is more about speeding the the process of edge banding vs providing improved results
Question 1 Tempature setting for 1 mm pvc edge banding? When i start the banding is getting over heated and melting. Question 2 How to clean the glue spread or where it comes out? Some times when applying edging glue is spotty or missing on the bottom edge of banding. Any advice is greatly appreciated. keep up the great work and thank you
@sedgetool
Жыл бұрын
#1 355 for temp setting..... #2 set the plate completely up in the machine is what I have seen cause this....
Hey Sedge, Would a regular MFT top fit right into the table base for the Conturo MFT? Considering the Conturo MFT, but was thinking of also getting a regular top that I could have in the base and just store the Conturo top for when i actually need it. thanks!
@sedgetool
3 жыл бұрын
yep ... will work ... do not order a Regular MFT / 3 and than order a conturo top ... it is really a mess ... order like you mentioned a MFT Conturo and than add a MFT/3 replacement top .....
@everettnetzband
3 жыл бұрын
@@sedgetool Thank you sir!
Sedge I have a question, what’s the dust extraction port for on the Conturo for? I’ve never used one before .
@sedgetool
Жыл бұрын
the dust port on the Conturo is to evacuate the odor if it is bothersome...
@jason-hh6lu
Жыл бұрын
@@sedgetool oh thank you, great video as usual.
Can you use it with preglued edge band or only non glued edgeband
@sedgetool
10 ай бұрын
should only use non glued
I can’t get my Conturo to stop creeping and leaving areas with no edge banding material. What am I doing or not doing?
@sedgetool
Жыл бұрын
In the begging when I first started using my Conturo I would pull the machine instead of letting the machine drive itself... I would experience areas of no glue...... let the machine drive itself and put firm pressure against the feed roller ...do not over exert pressure on the feed roller.. just firm pressure...this might help...
Very good but its wasting the grit some machines can even round.
@sedgetool
Жыл бұрын
ok
Indian price
@sedgetool
Жыл бұрын
??????????????????????
@AaronGeller
5 ай бұрын
As the merchant in Delhi told me after I asked him about his prices “anything is possible in India” but when he didn’t like my offer, he said “this is not possible” 😏
Fucking Boston 😂
@sedgetool
Жыл бұрын
Yeah Baby !!!!🤣