I've been running the secondair pnumatic beadlocks for a couple years now and they've saved me out bush on multiple occasions. Only a few weeks ago I hit a tree stump that was hidden in the grass and it immediately destroyed the tyre, however the beadlock cushioned the impact and saved the rim. I was then able to limp out of the track with a torn sidewall to a find a flat area to jack the car up and swap to the spare tyre. I highly recommend them, they're a good investment for that extra protection against tyre damage, protecting the rims, as well as locking both tyre beads....and can keep them fitted to the daily rim with near zero maintenance.

@Unclepooly

Ай бұрын

Awesome story mate! Thanks for sharing, i’ll pin this so others can see it too 🤝

Uncle Pooly knows his audience, mutes the the music as soon as he steps on the loud peddle ❤❤❤ Thanks for the info and the epic video! From limpopo 🎉🎉

@Unclepooly

Ай бұрын

Hahaha cant be missing out on those thong slaps! 🤣 thanks mate

@MikesManCave

Ай бұрын

I don't think he was peddling (selling) anything and he wasn't loud.

😅 so good when Jonno is like "Reckon we could stop talking bout it and just do it" 🤣

@Tourn4x4

Ай бұрын

🤣🤣 this ☝🏻☝🏻☝🏻

@hefzRobb3803

Ай бұрын

out there Beat'n On em Boys 👌🏼

@Unclepooly

Ай бұрын

🤣🤣

Every bloke loves a good free sticker until its yellow, good to see a smart way around it

@Unclepooly

Ай бұрын

Hahaha very true mate 😂 gotta try something different

Mate I'm so glad you started this channel, it's entertaining, informative. Better than most of the big channels so keep up the good work.

Mate that's mind blowing.... u have put all the new gear the tyres, rims , internal bead locks everything to proper test.... bloody legend

@Unclepooly

Ай бұрын

Not here to half arse it! 😂 genuinely wanted to know if they could handle that before sending them on a 10,000km trip next week!

Bloody hell, I was just thinking I had way to much money sitting around. Thanks for helping me get it back down there. That stuff was starting to stress me out 😂

@Unclepooly

Ай бұрын

🤣🤣🤣 any time mate if you get stuck again meet me at KFC

Thanks for the info on the tyres and the new bead locks.your videos are getting better each time you make one they are very informative for us novices on mechanical and tyres. Cheers Lee

Good to whatch some quality 4x4 content that isn't just one big ad or way to dramatic over everything. Loving the content keep it coming

@Unclepooly

Ай бұрын

Thanks mate glad you enjoyed! 💪

Fast becoming my favourite KZreadr - another useful and great episode

@Unclepooly

Ай бұрын

Thanks mate!

I love this it really has made up my mind on what I going to use next on

Ahhhhh the hangover recovery with uncle pool

@Unclepooly

Ай бұрын

Get this man a Zinger box 🍗

@calebvanderbijl6738

Ай бұрын

Glad to see I'm not the only one watching pooly after a big night 😂 best way to spend the hangover recovery, zinger box would be ideal tho

That 2 new things I hadn’t heard of! Legal bead locks and graded 4wd track maps. Downloaded it straight away Absolutely awesome thanks mate!

@Unclepooly

Ай бұрын

Glad you enjoyed mate!

@paulpatullo5146

Ай бұрын

Internal Beadlocks were around years ago and those were called Staun Beadlocks, but are they legal?. Probably depends on which nanny state you're in, as I always thought they weren't. But with the 2nd air valve on the inside of the rim out of sight, whose gonna know hey? I think the only reason for being illegal, was because of the "rim modification", as you had to drill the hole for the 2nd valve. If the rims were manufactured with the 2nd hole, no problem. But then again I may be wrong, as it's been many years since I first looked into these.

@beartiger1553

Ай бұрын

@@paulpatullo5146yes internal beadlocks are legal and you can also buy beadlock rims that are legal from Hutchinson Industries

@STALKERS4WD

Ай бұрын

@@paulpatullo5146 Yeah I heard the same but agree. The popo can't see whats not there.

Those second air are the solution for me. In the raptor I constantly pop beads. I’ll be getting them tomorrow. No more bead popping or defecting. Thx mate !!!

Solid Ep and solid new apprentice. Those beadlocks are impressive

More of Jonno! great duo quality content with helpful information 👌👌love it lads

@Unclepooly

Ай бұрын

Jonno will be back! Thanks for the feedback 💪

You are by far my favourite KZreadr make me laugh every time and I’m learning every episode as well I do want one of your trays when I do my chop

Great collab. Thanks!

Absolutely loved this ❤ nicely done Pooly

@Unclepooly

Ай бұрын

Thanks mate! 🙏

Love this channel, keep the vids up Pooly! So much better than alot of other 4x4 yt channels, cant wait to see what this channel evolves to!

@Unclepooly

Ай бұрын

Thanks mate!

Another fun filled episode and it's great to see Pooly and Son he will be an integral part going forward after watching this

Great episode guys. Very entertaining, New mates in the high country, giving out Stickers. Mat Preston safety tips.

Sweet playlist with the background music

You pair are awesome together, hope you do more stuff in the future

Those internal bead locks have been around for years and are an excellent tool. Cool content

@Unclepooly

Ай бұрын

They certainly have, such a good idea that a lot of people dont know about

Ripper video mate, pretty cool to learn about those internal bead locks and Aussie made 👌

Quality episode mate love the content, straight genuine blokes. 🤙🏼

@Unclepooly

Ай бұрын

Thanks mate! 🍻

Phwoarrrrrr what a video mate.. love it!

@Unclepooly

Ай бұрын

Phwoooooooaaaaarrrr Thanks legend

Best video editing out of all the lads i follow. We used to fit these second air beadlocks along with staun internals 15 years ago. Good bit of kit but still do require maintaining. If you run them super koad and dirt or dust gets in itll flog the tube out in no time. Good to see someone running them again tho 👌

@Unclepooly

Ай бұрын

Thanks for the heads up mate! And the appreciation on the edit 🍺

American here! Pneumatic Beadlocks are up and coming here too. I want to try them out myself as beadlocks are not "legal" on the roads here. Plus the labor to install them are $$$. Amazing content and channel Pooly! Cheers 🍻

Hell yeah Pooly another ripper video loving all the informative videos mate keep doing you and keep up the wicked content 🤙

@Unclepooly

Ай бұрын

Thanks legend!

Love the vid and the homemade tyre deflator bloody awesome

That air compressor set up is so good

Nailed the video production! And your music is on it, unc!

Uncle pooly back at it again! Good to see a practical way to avoid the free stickers! Keep it up big fella.

@Unclepooly

Ай бұрын

Thanks mate! Had to try something new they bloody hate me 😂

Such a sick video nah I love it! I’d definitely buy some one day! I’ve gone on trips without letting my air out thinking she’ll be alright… she wasn’t ever alright tho I need a set up like you good sir ! Super easy and no way to forget it

@Unclepooly

Ай бұрын

Definitely makes a world of difference! We all start somewhere its taken me a few years to get to this point but so good 👌

Between you and tj and Mac you got the best content on KZread! Up the vic boys yeewww

Just love your cruiser

Quality fresh content. Well done 👍🍺

Big ups for the app mentioned I didn’t realise I have a few tracks right near my place, opens so many doors cheers

@Unclepooly

Ай бұрын

Its so good! 👌

This is pretty much the same setup as tubliss for dirtbikes which has been around for a while now. Great idea 👍

Fantastic video!

They are so awesome great video legends

Cheers mate. I hope you were fully sponsored here because im off to buy the Goodyears and the Second Airs

Another great video mate ! I was aware of internal bead locks but thought it was just a comp truck thing. After seeing this video I want a set !

@Unclepooly

Ай бұрын

Thanks mate! I think it’s just because no ones really advertised them, wasn’t my goal either i just wanted to share my experience and so far they are sick!

Well done mate keep her up

Love the ep Could you do a run down video of how you did your compressor set up

Honestly impressed by the performance of the secondair pnumatic beadlocks

I ran the same style of beadlock on my old dirtbike, worked a treat!! Even managed to stake the front tyre, rode the whole day then rode home. Hopefully the car version is just as good!!

@Unclepooly

Ай бұрын

Thanks for sharing mate!

Love it Pooly, might have to get me a set of these 👍

I slipped into a rut on that track and lifted a wheel far beyond what was comfortable lol It’s a good time

Love ya work mate

I nearly marched out to the shed listening to The Proclaimers Woohoo 👍

Awesome content bud 🍻

Awesome info Uncle Pooly. Keep up the original content mate. Frothing on big bad Baz.

@Unclepooly

Ай бұрын

Thanks mate! 🙏

Aussie Enginuity at its best- thanks for sharing

Uncle pooly full of information and knowledge

Mad content, mad rig bra Subbed.

Pwooahh Pooly love channel mate! 🍻

That is one sexy rig mate haha! Built to perfection!

Used to run internals way back in the day. I ran the staun ones and they were great, easy to install and like you said you don’t have to get new rims

@Unclepooly

Ай бұрын

Quite a few comments now from people like yourself they have definitely been around and mostly positive things about them! Seem pretty good to me time will tell

Take one of those mechanical deflator caps that some people use to drop tyre pressure to a set amount and put it where you let the air out of your system. It’s a non-complicated way to let air out to a preset pressure that you don’t have to keep an eye on. I use Australian made Staun brand🍻

13:00 love the safety shoes.

On the auto air system ARB makes the linx that does set pressures up or down. I use that and a company called up down air and have a similar setup. I have 4 Schrader valves at each corner and 4 whips with quick connects. I click on the 4 whips, grab the arb Linx and set the pressure. Works pretty good!

Good video Pooly !

@Unclepooly

Ай бұрын

Thanks mate!

My brother put me onto your channel! Awesome content, also I love the sticker on your rear diff 😂😂😂

@Unclepooly

Ай бұрын

thanks mate 😂

What a great idea

Ive only ever seen one rear bead come off the rim while running external beadlocks. But that was under some pretty harsh winch comp driving. These are definitely a pretty solid option for on the road. Will be good to get a update after you out a few kms on them

@Unclepooly

Ай бұрын

Definitely after asking the question have had a few people with inner bead issues comment and i agree definitely a more sensible approach for what im doing cape york will be a good test for them

if you want an auto cut off for your tyre deflator, just buy a set of Stauns and sonme adapters to get the threads right. you can have 4 preset pressures then :) pretty simple i reckon

That tire inflation/deflation system is a thing of beauty

Yeah awesome stuff those tyres look nearly exactly like my 003 geo lander Yokohama see how they go.

Can you give us a rundown on how you setup your compressor looks heaps neat and wouldn’t mine chucking that in my Ute

Ohhh shit yeh another ripper uncle Pooly 💪🏼💪🏼

@Unclepooly

Ай бұрын

Cheers uncle mac daddy 🍻

BKT run a similar "flute" between the lugs on their tractor tyres too for mud ejection

What a great product, Aussie made🇦🇺🇦🇺👍 those tyres look like they have less than half a fart in them LOL . Uncle pooly no more shelling out $$$ on canaries and more for zinger boxes 👌🇦🇺

@Unclepooly

Ай бұрын

$800 defect fine = 53 zinger boxes i know what id rather! 🤣🍗🍗🍗🍗

Gee uncle Pooly really knows how to edit 👌💪

@Unclepooly

Ай бұрын

Thanks mate! I am learning new tricks every vid 💪

Those wheels are phat!!

Love that some music!

Cheers for the info 👍 have not put a step wrong with your KZread yet

@Unclepooly

Ай бұрын

Thanks for the feedback mate glad you enjoy!

Dope!

works offline aswell pretty good to know where you are

This is awesome, as you once said “I don’t need sponsors, I just buy what I want”. Great little tech spec video show casing a great product from a small Aussie business Our favourite Islamic extremist state member Jono is a good feature on the channel too P.S. no wonder ya found this product up there as I heard the boys in swan hill like their bags of chalk 😉

@Unclepooly

Ай бұрын

😂😂 thanks mate!

Australian product. Fantastic! Product needs more promo in the 4wd segment. But as you boys said potentially saving people on the side of the highway that really don't know how too or not safe too change a tyre. Limp it somewhere.

@Unclepooly

Ай бұрын

Definitely a awesome invention, i have already heard storys of blokes out wheeling too limped back to camp on dead flat! 😂

I run the tubliss system on my dirtbike (which uses the same principles as this air beadlock) I back it, as ive gone over the handlebars grabbing the front brake where you would normally wash the front end out. Only issue is you have to run some tire slime to keep the pressure somewhat consistent over lengths of time

@Unclepooly

Ай бұрын

Thanks for the comment mate! Another great story interesting about the tyre slime

@mattedwards7788

Ай бұрын

@@Unclepooly that being said, dirtbikes are designed with tubes in mind while road vehicles being tubeless might have better designed flanges. Let alone 1000 spoke nipples. If you have dramas keeping air in at 5psi that might be an easy fix.

Finally somone who isnt flogging darche gear or entering codes and adverts every 2 seconds

@Unclepooly

Ай бұрын

Unfortunately Ive got some bad news for you with the darche gear 😂

Neen running them for a while, wouldnt recomend haveing the beadlock valve back there as its good to check the pressures of the inner tube regularly. They have been a reliable setup.

Looks like im getting me some beadlocks. Possibly one of the most informative videos i've seen in a long long time. Newtracs is fucking sick too. One of the best apps ive ever paid for.

@Unclepooly

Ай бұрын

Glad you enjoyed mate! And i agree newtracs is awesome 💪

@NoMatureContent

Ай бұрын

@@Unclepooly James is real responsive to e-mails too. Ive been a subscriber for a little while, its an invaluable app. Apparently comments and pics are coming very soon.

Gday, firstly it bloody good to see an Australian product, I’ve never heard of SecondAir before and I truly hope after this video more people will look into this and can stop being harassed by the law, Johno don’t go bad on the camera either mate, shit hot episode once again, cheers

@Unclepooly

Ай бұрын

Once again thanks for your comment mate! Appreciate your support and feedback on all videos 🍻

just like how a motorbike beadlock works, awesome to see them on a car

@Unclepooly

Ай бұрын

Never thought of it like that but very true!

There are also bead grip wheels made by Method wheels here in the USA, not sure if they are available in Aus though.

That bead-lock is AMAZING!!! 10 times better than getting pulled over. Also, are TJ and Mac going to the cape with you?

@Unclepooly

Ай бұрын

I agree mate! Theres nothing worse

We run them for years but made by staun. Got our first set around 2005 for the jt's, back when steel 15x8's were cool 😂😂😂.

@Unclepooly

Ай бұрын

Steelies are for trailers now 🤣 how did they go? Another bloke somewhere in these comments reckons stauns were no good

@Franksssss

Ай бұрын

@Unclepooly hahaha. But steelies can be bashed back to some sort of shape when fingered lol, but we never had an issue. Little bit of a prick to fit but otherwise flawless. We consistently ran 0psi on JT2's up here in fnq.

Good year wear quick be interesting to see what u think of these

@Unclepooly

Ай бұрын

My next trip is 10,000km im very interested to see

Nice video mate. Amazing product I think they’re better than mechanical beadlocks from what you’ve shown us. Do you Reckon you could do a compressor run down a bit more in detail. I see a few brands in there. Cheers for the quality videos 🎉❤

@Unclepooly

Ай бұрын

Glad you enjoyed mate! Might sneak it in my next video

hey mate do ya reckon you could do a quick vid on your air compressor setup, would be good to add to the rig. thanks

this is actually great! only thing is the website is broken. plenty of stock around though it seems like.

I looked into these awhile back. Saw a few comments that dust/mud and sticks can still get in. While I get it with the defect thing. The rest let it down for me. I find a blown inside bead would be very unlikely compared to the outside due to the outer wheel being where it gets bashed the most. Will be interesting on how they work over time. Keep us in the loop. Also you changed from Baja Boss. I run the Nitto Mud Grappler (the bald tyres on your truck lol). Have you had a run with a good set?

I remember seeing these secondairs advertised in the 4wd monthly/action pages when i was a kid, even roothy had a set of them in milo for quite some time, and the piranha offroad 60 series also had a set. Interested to see how you go with them as my understanding is they stopped using them when they werent advertising them anymore, i think theyre a fantastic solution to the legal problem.

@Unclepooly

Ай бұрын

Hey mate thanks for sharing, seems to be how the story went the marketing stopped and that was the end of them will be interesting to see if they make a comeback im not here to market them just genuinely wanted to share because i thought they were such a simple and good idea

Top quality shit right here

Iv definitely seen the rear bead de-bead on low pressures (steel beadlock rims) car was basically on its side in a big rut 🌅 I think it actually did both rear inner beads 😂