Very nice! Love the shape😃

So cool brro. What a talented guy.

@MattCarves

24 күн бұрын

Cheers Reuben.

Fantastic thanks Matt

Great video Matt, always very informative. Lovely bowl!

@MattCarves

Жыл бұрын

Cheers Christine

Wow!!! Matt, the bowl is beautiful this shows the control that you have in your hands. cheers and enjoy carving also thank you for the share. Best regards, Amit🙏

@MattCarves

Жыл бұрын

Cheers Amit. Thank you for watching and commenting. Hope you are having a great day.🙂

Really excited youve made a video working with these kutzall products! I literally just had my very coarse concave disc shipped to me last week and arrived over the weekend. I've already busted it out and grinded on some claro walnut. I've made 6 little bowls already. Phenomenal discs, absolutely. Matt, thank you for sharing your work! Always a good day seeing that you've uploaded some fresh work! Beautiful piece!

@MattCarves

Жыл бұрын

Thanks for watching. Yeah I think you get what you pay for. They are really good and easy to control. Stay tuned my next video is carving a mushroom with them👍

Astonishing tool !!!

Very well done, thanks!

Seems kutzall makes some nice choices in woodworking products

@MattCarves

Жыл бұрын

Yeah. I love their tools

Beautiful piece! Well done sir!

@MattCarves

Жыл бұрын

Cheers Chris. Have you taken a break from youtube?

@therep49er

Жыл бұрын

@@MattCarves not on purpose lol. Just been pretty busy with life stuff lately. I am hoping to get back at it soon!

Great job!

STUNNING!!!

@MattCarves

Жыл бұрын

Cheers Steve 👍

Ah pooh, came in for the end! Have to rewatch but that's no hardship! I was watching the first vid from Jonas Olson in two years, amazing creative carver!

@MattCarves

Жыл бұрын

Coil will check out that channel. Hope your carving a lot?

@MattCarves

Жыл бұрын

Ah yes I remember now. That is a cool dragon

@clairetolmie3247

Жыл бұрын

Lovely bowl too Matt! I've got a silicone mushroom commission before i can carry on with my dragon, i'll send pics !

Now I need those!

@MattCarves

4 ай бұрын

😅👍

Love your work sir

@MattCarves

4 ай бұрын

Many thanks 👍🙂

Nice bowl 👍👍👍. Those disks look good for removing alot of material. Thanks for the info on the bandsaw, I got one and my work load has dropped alot, next is scroll saw and belt sander. Keep up the good work.

@MattCarves

Жыл бұрын

cool, good to hear you get a bandsaw, they are real time savers for cutting wood down.

@MattCarves

Жыл бұрын

cheers for watching.

Wow. Such an awesome job. But dang it, you've now made me want to buy a new tool! I've always wanted to carve bowls and thought I HAD to have a lathe... or go caveman and use an adze. Thank you for educating me. New subsriber here. I have a feeling I'm gonna love your content!

@MattCarves

Жыл бұрын

Cheers Tim. I got no room for a lathe either.

Thank you!

@MattCarves

8 ай бұрын

You're welcome!

Matt, I would love to see as I have 3 kutzall shaping discs 🙂.. I have done very little work with those discs.. looking forward to this video..thank you

@MattCarves

Жыл бұрын

Well you have one more disc than I do. 😆. What have you done with them so far?

@MultiTom1956

Жыл бұрын

@@MattCarves to be honest started making a bowl in a boat shape like how u did ....it's incomplete

Brilliant video simply explaining it all off to do a bird bath with copper tube pedestal

@MattCarves

Жыл бұрын

Cheers Alex, good luck with the birdbath 👍

@alexnicanovich3636

Жыл бұрын

@@MattCarves many thanks, i have the 1/4 inch shank sphere original fine have used it on a sculpture ball is about 1 inch round and easily sands out roughness from extreme coarse to probably around 80 grit im not sure exactly but worth the money for sure. Many thanks

@MattCarves

Жыл бұрын

@@alexnicanovich3636 Cool that good to hear. I just bought a fine kutzall shaping disc

Matt, thanks for this excellent video. I have a scrap piece of merbau (290 x 650 x 42) that I'd like to make into a cutting/serving tray for cheese, olives, etc. I'd like to gouge out deep wells to hold dips and/or nibbles and to make the piece lighter. How do these Kutzall cutters work on hardwood?

@MattCarves

2 ай бұрын

Can't really say how the kutzall discs will go in hard wood. Probably OK if your doing a shallow tray.

That was an amazing video, and a really nice shaped bowl. I've started using Kutzall discs for carving various shapes but still struggling to sand the grooves left behind especially in the tight spots! What methods did you use to finish the bowl as it looks super smooth at the end.

@MattCarves

Жыл бұрын

Yeah that is a tough one. I have been using the arbortech contour sander, but I haven't decided if it's good yet. I did use a small 20mm disk attached to the dremel as well. I will have to make some more next year to find a good method, it's a tricky one.

Thank you forthe video. Can I skip the middle coarse disk and use the original extreme with original smooth only?

@MattCarves

4 ай бұрын

Yes I reckon that would work. It works with the dremel kutzall burrs 👍

Great video, I'm a long time woodworker keen on getting into some power carving, I have a 125mm ×22mm anglegrinder, would these disc's be compatible as far as you know?

@MattCarves

17 күн бұрын

I run mine on the GA5040C 125mm (5") 1400W Variable Speed Angle Grinder M14. Probably best to check the website as I am only familar with the formats in New Zealand. Cheers for Watching

Wow

HI, thank you for the video. What do you think skipping the middle coars disc and use the smooth after the very coarse disc?

@MattCarves

5 ай бұрын

That's the way I would go if I was doing a lot of bowls. I tend to do that with the dremel kutzalls

What thinkness is your wood

This looks beautiful Matt, what wood is this ? I haven't had a chance to go around the saw mills for a good wood as we don't have lumber yard like in the NZ or the US and this DIY trend has not still hit our shores that much .... thank 🙏you enjoyed watching and learnt a lot from it 😊

@MattCarves

Жыл бұрын

The wood I believe is Oregon also known as douglas fir. I hope you can find some wood soon. Thank you for watching and commenting

@MultiTom1956

Жыл бұрын

@@MattCarves thank you Sir for sharing your talent🙏

great video and very nice piece, but how long did it take for this piece ??!

@MattCarves

8 ай бұрын

Cheers. It took about a day with filming. 👍

Hey Matt, what kind of table/clamp vice are you using. What do you call that thing you clamp the bowl with?

@MattCarves

9 ай бұрын

Hi. I am using the triton superjaws XXL. For clamping. Cheers for watching 👍

@user-ou9qu8ou3w

9 ай бұрын

Thank you and thanks for the videos. They are super useful, informative, clear and worth a mint. Cheers@@MattCarves

Hey mate, Looks like the affiliate link isn't quite working. If you look at video description, the '?aff=70' isn't lit up as part of the hyperlink. One day I'll get a proper Kutzall disc - settled for the offbrand trademe version for now!

@MattCarves

Жыл бұрын

Im not sure why it is doing that the blue part works anyway. Yeah those kutzal discs are expensive. not sure if you know you can get them from carbatec in Auckland or Christchruch thats where I get most of my burrs from.

@srharnden1370

Жыл бұрын

@@MattCarves PS I really like your works!! Thanks heaps for the advice/inspiration

How long does this kind of disc last when u use it frequently?

@MattCarves

Жыл бұрын

Have not used it frequently enough to make that call, I know the kutzall dremel burrs last me about 1 year. However these questions are hard to answer as everyone carves different woods and has different styles of carving. Cheers 👍

How did you treat it to avoid cracks?

@MattCarves

Жыл бұрын

This wood has been dried for many years, so pretty unlikely to crack.

How thick is the wood for the bowl it looks like 2 inches

@MattCarves

Жыл бұрын

Started off at 2.5 inches approx

como eu faço para conseguir um disco de desbaste desse

@MattCarves

4 ай бұрын

I would google search for a local stockist to wherever you live. Or you can buy them online from kutzall in USA( shipping would be expensive though) See the description to that video. Cheers 🍻

@rogeres83

4 ай бұрын

Ok obrigado pela dica meu amigo

How much time consume in one piece

@MattCarves

Жыл бұрын

About 5hrs but I'm filming as well.

@mytradingjourney569

Жыл бұрын

@@MattCarves i learn lots of things after watching your videos

Is a cedar?

@MattCarves

Жыл бұрын

That wood is Oregon. 👍

@bruceviana2377

Жыл бұрын

it seems to be a very soft and stable wood. Here in Brazil we have many species, I work with some very hard ones and for carving I use a saw with a dimmer. The most common species here are: Angelin, Roxinho, Muiracatiara, Canela, etc. What woods do you use?

@MattCarves

Жыл бұрын

@@bruceviana2377 yeah I have never heard of those woods. I carve in black walnut, pine, macrocarpa and any other wood I can get my hands on. Cheers for watching and commenting 👍