Started watching this channel as well as a few other detailing/ car cleaning channels in the last 7 weeks after I bought my new car. Never bothered about doing a proper wash and clean on my other cars before, as long as it looked clean it was good enough for me. But now I’ve learned so much and I’m sure this car will look top notch for many years now. I’ve Washed this car 5 times now plus with all the other stuff it actually looks better than the day I picked it up.

@diydetailofficial

4 ай бұрын

That is awesome!

Thanks to the Iron remover I get to calmly release gaseous pressure without a worry while enjoying some detailing 😂

@diydetailofficial

4 ай бұрын

lol it’s a win win

I was once doing a mobile job and while I was applying iron remover the wife went and told her husband I cut a really bad one! Luckily the husband clarified the iron remover smells. The Honda looks glossy and clean and she had to be thrilled. Thank you for another video.

@diydetailofficial

4 ай бұрын

Oh wow!

@acquiesce1064

3 ай бұрын

😢😢😮

Love this channel. I’m even in the FB group. No gatekeeping, no BS, tons of engagement. Criminally underrated, it’s amazing what you guys have done. Huge confidence booster and I am now doing paperwork to detail professionally. Cheers!!!

@diydetailofficial

4 ай бұрын

Wow, enjoy the process of being an entrepreneur.

I bought the entire DIY library for my shop but doggone it I have about a year's worth of OTHER chems to burn through before I get to it all. I've even been giving away some of my stuff. Rinseless is life, though!

@diydetailofficial

4 ай бұрын

Thank you.

The IK Foamer is expensive here in my country. I use sprayer (like the one you guys have for rinseless) to put shampoo on the car. It’s not sudsy, but it does its job by breaking down the grit. I like this method more than the messy foam cannon with pressure washer.

@diydetailofficial

4 ай бұрын

Excellent, what country are you in.

Guys get your shop done!!! Can't wait.

@diydetailofficial

4 ай бұрын

Working on it. Contractors say, March, they never say what year…

@idler02

4 ай бұрын

⁠amazingly true.... I've recently been on the same path.... I've figure it out! Renovations are never finished.... There is a point in time, that we just give up and get all going!!! 😅 all the best guys!!! U deserve it!!!

Excellent video! I’m thoroughly enjoying this channel and am learning so much more about detailing. Keep up the great work!

@diydetailofficial

4 ай бұрын

Great to hear!

Loved the live details. Hope you guys keep doing those.

@diydetailofficial

4 ай бұрын

This wasn’t live, but we try to keep it simple

This almost seems like a perfect thing for a first time polisher/pad user. I have never polished a vehicle before and this seems like a great way to start and learn and can’t screw it up. Some confidence before using the yellow standard polish. Thanks

@diydetailofficial

4 ай бұрын

Correct

Love the video guys, back to basics 👍😁❤️

@diydetailofficial

4 ай бұрын

Thank you.

This channel is awesome, its teach us to not waste stuff, also water (very needed today). Keep it simple not complicated. They are making simple standart, simple way technic you use polish machine,but yet the result is reach the highest stage can reach by thr product. Great. Simple place also... Keep it simple most needed today as way of life. Thankyou from Bali

@diydetailofficial

4 ай бұрын

Wow, thanks!

@adhisanjaya235

4 ай бұрын

@@diydetailofficial thank you from Bali Sir/Mam. Who is this behind replay as admin?

Been following you guys for a while. Thank your for this video without the pressure washer. It gives another perspective. Yvan, Shoutout from Terreboone ;) We know snow.

@diydetailofficial

4 ай бұрын

Yes you do

Great video looking forward to see the available on the da $ rotary polisher👍🏻👍🏻💪🏼💪🏼

@diydetailofficial

4 ай бұрын

March 15th

Wow. Great way to do it

@diydetailofficial

4 ай бұрын

Thank you! Cheers!

When your doing these types of full wash videos, I never see you doing the door jams. At what point do you recommend doing the door jams? Loving the content!!

@diydetailofficial

4 ай бұрын

We do them off camera because they are time consuming and difficult to film.

@kcalla82

4 ай бұрын

@@diydetailofficial gotcha! At which step do you recommend doing the jams? Pre or post wash/drying or would you class it as part of the interior clean?

First of all love your channel! I have been using your products for a while now and they are great! Question how often can you use the ceramic gloss with a machine polisher? Any risk of removing clear coat? I will be ceramic coating my cars with the 3 and 5 year stack this summer.

@diydetailofficial

4 ай бұрын

As often as you desire, but ideally stop using it 4 months before applying a coating.

Thank you for the video - great demonstration! How long should the Ceramic Gloss last? I live in South Florida and my car is kept in the garage over 20 hours/day. I also wash my car every week using rinseless wash.

@diydetailofficial

4 ай бұрын

6 months or more

Two of the coolest detailers on the web together under the DIY moniker. When will we see your products in Scandinavia and Europe?

@diydetailofficial

3 ай бұрын

Soon, ask your favourite retailer for DIY Detail by name Https://diydetail.com/pages/distributors

Great video guys! Can you use the ceramic gloss applied with the polisher over the 3 year coating that I applied 5 months ago without degrading the coating?

@diydetailofficial

4 ай бұрын

Yes you can!

Thank you as always! 💖🧜‍♀️

@diydetailofficial

4 ай бұрын

You are so welcome

Loving these videos your making in the new shop, ho2 c9me you didn't use the legacy sponge?

@diydetailofficial

4 ай бұрын

We like showing different options.

People are so afraid to put a ceramic coating on their vehicle, but it’s the prep work, that’s the hard part? Putting the coating on is the simplest thing I’ve done in car detailing.

@diydetailofficial

4 ай бұрын

Correct

You guys tha best 🤙

@diydetailofficial

4 ай бұрын

Thank you.

Sorry if this was asked earlier, just joining. Is it better to do pre-rinse with incredible suds and then do the second pass with rinse less wash? Looking to get max performance and protection, so curious which way works best.

@diydetailofficial

4 ай бұрын

That works great

Great video as usual, your 5.25 Jeweling pad is OOS-thoughts on using larger 6.25 on either 21 inch DA and/or Milwaukee M18 Orbital 5 ' sander?

@diydetailofficial

4 ай бұрын

Use the 6 inch on the 21mm with its original backing plate at low speed.

Great content as always! If I apply Quick Beads on my car without decontamination before… I was in a rush to protect de paint. Now I want to apply ceramic coating to my car, if I do the full decontamination and use the Gold Standard polish with the waffle pad is that going to work and have the same propriety and longevity? Thank you again for your great content

@diydetailofficial

4 ай бұрын

Yes , that’s perfect.

Ready!!

@diydetailofficial

4 ай бұрын

Thank you.

Hey guys,great video. Do you have to dampen the jeweling pad using that method to apply the ceramic gloss?

@diydetailofficial

4 ай бұрын

No need

Loving your channel! My question is what can you advise for budget polishers setup? I was thinking of cordless Milwaukee rotary and DA21, and eventually Shinemate.

@diydetailofficial

4 ай бұрын

We have polishers launching next week.

@makazkin

4 ай бұрын

@@diydetailofficial but the problem is that they are corded?

Where can I get that sick clear bucket with the volume markings? Notice it's pictured on your site as well. Thanks for all the tips.. Recently purchased several of your solutions.

@diydetailofficial

3 ай бұрын

Thank you. Local restaurant supply

A few questions about this. Can ceramic gloss be applied using a hand applicator? How do you maintain the car in subsequent washing using these forms of protection? Also, if one wanted to go from using this to any of the 3, 5, or 8 year coatings would there have to be some special procedure to remove or insure that quick beads or ceramic gloss won’t interfere with the coatings ability to adhere? Thank you.

@diydetailofficial

4 ай бұрын

Yes it can be applied with an applicator No special care needed. You should polish it to remove it.

Great series. Will the water spot remover affect my wax or sealant? How often do you treat the car with the water spot remover?

@diydetailofficial

4 ай бұрын

It may degrade it slightly. You only need to use it when you see the beading starting to go down.

I'm a couple hours south of you and know exactly when this storm was happening 😀 something I've noticed watching videos, why doesn't anyone remove that rear license plate? I grew up on a gravel road, so I'm used to watching dust pour out from behind a license plate for what seems like it'll never end. And since it was so cold, isn't that hose/bucket awfully cold water? Does that matter? Or do you have heated water in your shop? Another great video, I really enjoy your content. Thanks guys!

@diydetailofficial

4 ай бұрын

Sometimes it’s best not to remove them, yes hot water is great to have

Subscribed & rang the Bell, what gun was that you used with hose to do the pre - soak. Appreciate your content !!

@diydetailofficial

3 ай бұрын

From Home Depot

Ready

@diydetailofficial

4 ай бұрын

Thank you.

Water spot removal question? I have seen you use this many times and you spray it Willy Nilly. How much do you spray per panel? Almost everything else you tell us how much to use and not to use too much. Thanks!

@diydetailofficial

4 ай бұрын

3-4 sprays

I have an IK foam pro 2. How much incredible suds do you recommend adding to all clean? A capful? I like the idea of extra dwell time

@diydetailofficial

4 ай бұрын

For a gallon 1 capful

@chriss3959

4 ай бұрын

Thanks!​@@diydetailofficial

What can I use to rid my car of previous coatings? Ty for your time.from Michigan!

@diydetailofficial

4 ай бұрын

Polishing is the only definitive way.

Hi guys, I’m getting a new car for me on Friday, it’s a white vw golf 1.5 tsi GT EVO. As I’m 67 with loads of arthritis, I’m looking to do the rinsless wash , clay and seal you did on Pans channel. Would you then apply a way after the sealing, or is that wrong? Thanks, new subscriber.

@diydetailofficial

4 ай бұрын

You can apply a wax if you desire, but it’s not necessary.

Washing tips and tricks for laquer painted older cars please! There's almost no info on old cars on KZread for how to wash and maintain old car paint. Thankyou

@diydetailofficial

3 ай бұрын

No different than modern paint in terms of washing.

Could you do a video using the sponge with incredible suds ? Not a Rinseless wash.

@diydetailofficial

4 ай бұрын

We have several on the channel

Can you use rinseless wash instead of incredible suds? Just trying to conserve as much water as possible.

@diydetailofficial

4 ай бұрын

Definitely

Great video. Why are there bars on the inside of the windows lol? They keeping you in !

@diydetailofficial

4 ай бұрын

For now, yes

Do you have a video of car wash outside? We don't have a garage. I know we should wash early morning/ late afternoon/early evening? Should we wash one side, then the other

@diydetailofficial

4 ай бұрын

Washing outside uses the same technique. Here’s a video you might enjoy kzread.info/dash/bejne/p6at18erY7HbfLA.htmlsi=UtH_9DkEdp0kLKYK

agree with everything but its sad that where i am in australia its just rocks everywhere on the high way and my car is getting new rock chips every week. last week even cracked windscreen a bit.

@diydetailofficial

3 ай бұрын

That’s not good, PPF may be your answer.

Using the rotary usually provides better gloss, is the DA better at applying sealants like ceramic gloss?

@diydetailofficial

4 ай бұрын

Yes a short stroke DA ideally

Hello guys .. I was wondering what is the best strip wash to get if I'm trying to strip waxs and selants to use your products ? Thanks

@diydetailofficial

4 ай бұрын

DIY Detail All Clean

@layyronfrasier9713

4 ай бұрын

@@diydetailofficial thanks 👍👍

If you are new to detailing, you should subscribe to this channel. No one is more or better informed when it comes to detailing than Yvan, Period...

@diydetailofficial

4 ай бұрын

Thank you.

I’ve never used an iron remover but will for the first time soon, I thought you should wash, clay, then spray iron remover on then rinse it off. I never thought to use the iron remover as a lubricant for the clay/ decon towel 🤔

@diydetailofficial

2 ай бұрын

It’s not as efficient when you spray it on.

@tonykemper8896

2 ай бұрын

@@diydetailofficial makes sense

Which all year routine would you recommend for someone living in an apartment with only access to a self service car wash or automatic car wash or some kind of rinseless or bucket wash

@diydetailofficial

4 ай бұрын

Rinseless for sure

@user-tm7cx1fe8i

4 ай бұрын

@@diydetailofficial would that be enough whole year? Rinseless in a hand foamer and thats it?

@diydetailofficial

4 ай бұрын

Yes

1st! Ready roll. Where is Humberto?

@diydetailofficial

4 ай бұрын

Congratulations Tim! He must be in an airplane

Will I need to clay lube my suv in may or June since I just bought my 2024 chevy equinox ?

@diydetailofficial

4 ай бұрын

Yes

Great video. New way to apply Ceramic Gloss 💪🫡

@diydetailofficial

4 ай бұрын

Glad you liked it!

What’s the safest way to remove wheel weight residue from the wheel barrels?

@diydetailofficial

4 ай бұрын

DIY Detail Tree Sap Remover

Hi Guys!!!! I'm from Brazil.... I also posted this comment on the other video.... Sorry to post it over here as well.... It's just because I'm really looking forward to hearing your answer.... I have even sent an email to Yvan... I thought about buying some products to bring over here... But I'm still working on it... Tax is still a big issue....:( specially because our currency is on the toilet comparing to dollar...) Anyways.... I wonder if I can use a little bit of a regular high quality shampoo, in order to wipe off the compound... And BTW, I'd love to try the golden standard polish... ....:but it is what it is.

@diydetailofficial

4 ай бұрын

Yes

Hi Guys, When you apply Ceramic Gloss over Quick Beads like that, does the Ceramic Gloss not completely mask the effects of the Quick Beads ?

@diydetailofficial

4 ай бұрын

No they interact together since the DIY Detail Quick Beads isn’t fully cured.

@chrisdenman1985

4 ай бұрын

Wow! Now you have the best of both! Thanks guys for another new application teaching.

How hard is the water in your shop? I don't have a garage, and have heat to deal with so I mostly use Rinseless, but would love to be able to do pre rinsing

@diydetailofficial

4 ай бұрын

About 600tds

@MrSlyr586

4 ай бұрын

@@diydetailofficial good god! Guess I need to stop making excuses and get to it then.

Do you remove clear coat when applying CG like this?

@diydetailofficial

4 ай бұрын

No

And regarding this video, how about the amount of ceramic on the pad?? Doesn't it jeopardize the pad a wee bit???

@diydetailofficial

4 ай бұрын

Not at all

Can all this be done if the vehicle has a ceramic coat on it

@diydetailofficial

4 ай бұрын

Yes

what garden hose sprayer are you using ?

@diydetailofficial

4 ай бұрын

From home depot

Could you do a vehicle that dirty with just a rinseless wash?

@diydetailofficial

4 ай бұрын

Yes kzread.info/dash/bejne/p6at18erY7HbfLA.htmlsi=RwMZlceK8XabgEDD

That’s what my pressure washer foam looks like, have such hard water where I live. 😢

@diydetailofficial

4 ай бұрын

So sorry

Is there any harm in using iron remover on gloss black wheels on a regular basis?

@diydetailofficial

4 ай бұрын

No harm other than to your wallet.

Would this be considered a paint enhancement?

@diydetailofficial

4 ай бұрын

Yes

is hard hose water okay to use as long not in the sun?

@diydetailofficial

4 ай бұрын

Yes, and you towel dry before it air dries

Hi guys, I’m loving this back to basics content. I do have a question around this kind of setup. I do have a pressure washer but sometimes I can’t be bothered to set it up or make noise etc. if you do a pre-treat and then rinse with a hose, it leaves a bit more traffic film than it might with a pressure washer. If you then did a Rinseless wash of that traffic film, is that still ‘safe’ to do? I feel like detailers have scared us all about contact washing any kind of dirt whatsoever!

@diydetailofficial

4 ай бұрын

Yes, absolutely

Whats your opinions on iron remover on stripes like wrap matetial or vinyl? I have stripes on my truck and was wondering if i have to change up the approach with those areas on my truck?

@diydetailofficial

11 күн бұрын

No issues

@danspooner-wi1nb

11 күн бұрын

@@diydetailofficial thanx again for your reply im seriously considering my own detailing company and watching all your videos offers a ton of knowledge 👍 and of course Pan cant leave him out either all you guys are a huge help

@diydetailofficial

10 күн бұрын

Thank you. This may help kzread.info/dron/iAirridYXEt5iQIZ4K9RmA.html

@danspooner-wi1nb

10 күн бұрын

@@diydetailofficial aww sweet perfect ive been trying to remember the name of his academy thank you 👍

Is your water spot remover safe for ceramic coated cars?

@diydetailofficial

4 ай бұрын

Yes

What foam generator device did you use in this video?

@diydetailofficial

4 ай бұрын

From Amazon

@The_CR_Phil

4 ай бұрын

@@diydetailofficial What's the name of that device at Amazon?

Where in Ontario Canada we can find DIY products

@diydetailofficial

4 ай бұрын

Toronto toc supply

What happened to your old shop? Just curious

@diydetailofficial

4 ай бұрын

It was a lease, this one we own.

I hope you are on a well for your water . because for me that wash would cost me 50.00 dollars just for water

@diydetailofficial

3 ай бұрын

City water

It’s great that you guys sold out of just about everything you sell, but I’d hire a new manager, who orders your products! I’m happy for your success though 👍

@diydetailofficial

4 ай бұрын

Our problem was lack of warehouse space, our move to the new warehouse will be completed this week. Then our inventory levels will quickly grow to avoid shortages.

I might have missed the explanation but what's the point of using the machine to "polish" the ceramic gloss into the paint compared to just using it during the drying process? It doesn't correct any swirls or anything right? Not knocking your process I'm just wondering if there is an advantage to getting my Milwaukee out with the ceramic gloss😂.

@diydetailofficial

4 ай бұрын

It adds a little more gloss, the pad has a little amount of cut. It also adds to the longevity of the DIY Detail Ceramic Gloss

How come some believe pressure washing, contact wash, and finally rinse wont damage the paint? but on the side like you guys, say pre rinsing, pressure washer, contact wash, and then rinse will help not damage the paint. Why is this such a controversial topic? I just want to see the amount of damage it actually does if you don't pre rinse.

@diydetailofficial

4 ай бұрын

We prefer to foam, rinse, foam, contact wash. There is no right way, no wrong way, only preference.

Nick you’re a hack. Haha just kidding mate, you guys do an awesome job and you are most definitely inspiring me to look after my car more now too. Love ALL your videos guys. 🙌🏻

@diydetailofficial

4 ай бұрын

Thank you.

How does one package this to sell as professional

@diydetailofficial

22 күн бұрын

As a paint enhancement

Don't you use the decon towel on the lights?

@diydetailofficial

4 ай бұрын

Yes we do

Iron remover smells like money to me 😎 great job fellas.

@diydetailofficial

4 ай бұрын

Well said, but don’t waste it.

@PolishedMobileDetailing503

4 ай бұрын

@@diydetailofficial since switching to your brand of iron spray ive never had it last longer ! The DIY line fits nicely into My business. I use quick beads on every wash, add ceramic gloss for the extra something. Interior clean is my favorite though !

I hate the smell of iron remover…was using some today and it felt like the smell followed me around for a few hours I would randomly get a wiff of it

@diydetailofficial

4 ай бұрын

We use less than an ounce on most vehicles, that dramatically cuts down on the “fragrance “

What’s the dwell time on pretreating?

@diydetailofficial

4 ай бұрын

A few minutes, you want to rinse before it dries.

@thewealthadvisor

4 ай бұрын

@@diydetailofficialthank you guys

How did you guys end up relocating to Omaha ?

@diydetailofficial

4 ай бұрын

We’ve always filmed in Omaha, with the odd little field trip

@RCdetails203

4 ай бұрын

@@diydetailofficial I’m sorry I know you’ve been in Omaha..I meant how did you guys end up in Omaha in the first place when you started DIY

Do you guys need me to project manage your shop refurbishment 😬😎👍

@diydetailofficial

4 ай бұрын

We’re good, but thanks

It’s the one process you guys do that I won’t do😂. I abhor the smell of Iron Remover so I don’t use it on paint or glass…wheels only. I clay with normal lubrication from the car soap or Rinseless Wash.

@diydetailofficial

4 ай бұрын

Using it this way dramatically reduces the fragrance.

@BetterThanNewDetailing

4 ай бұрын

@@diydetailofficial 😂😂I may give it a shot on this weeks details. I most definitely use Incredible Suds! However Incredible Suds smells so good I’d hate to ruin that smell😂😂

@26-CJ

Ай бұрын

When you talked about your mix for the wheel cleaner. You said you mixed All Clean 15/1 and just a little bit of Incredible Suds. Can I ask about how much water you had in the sprayer and then how much is a little bit of incredible suds.

I don't see how the iron remover can do its job when you're using so little of it, and the suds on the car don't allow the chemical the time it needs to do its job. I understand the desire to be efficient, but I doubt you're getting the results you could achieve by using the traditional chemical decon method of applying it to a dry car and allowing it to dwell a few minutes.

@diydetailofficial

4 ай бұрын

Try it, you will see it’s actually more effective. IRON REMOVER: what's the best way to use it? Less, or more? kzread.info/dash/bejne/fGSZzblrod3dY6w.html

Iron remover smells awful.There has to be other options that work...

@diydetailofficial

3 ай бұрын

If used how we advocate you will see using only 1oz for a whole car dramatically reduces the fragrance