NJ Modular Engine ECU & Transmission (New Versions) with Throttle & Key Switch Input :) :heart: steamcommunity.com/sharedfiles/filedetails/?id=2415184878 steamcommunity.com/sharedfiles/filedetails/?id=2415184561

@buff9267

3 жыл бұрын

Yeah, we do need an rps limit tutorial

@ryanc00p3r3

2 жыл бұрын

Why you didn't teach us to build an ECU rather than downloading on steam workshop. Teach us how to build ECU for Modular engine.

@wildbill6976

2 жыл бұрын

@@ryanc00p3r3 just download it and open the microcontroller and see the logic for yourself... would be far too complicated to try and explain on a video

@AmmoPack

2 жыл бұрын

@@wildbill6976 not really. lol. What makes it difficult to explain? Just put your thoughts into words while building it. Bam. Recipe for any tutorial videos

@malta2395

Жыл бұрын

Is anyone using this to make there engines run because mine aren't working and I don't know how to make a modular engine

Yes a bigger version of the ECU please

Hell yeah! Been waiting for this one! Thanks NJ, you’re the man!

I would like a bigger version. More functions are always good. You can always delete unused nodes to compact it.

You are my favorite KZreadr because you not only show useful information you also make stuff to make it easier to get to our goal.

I know this video is from a while ago but I just wanted to say thank you! I made a small outboard motor that I was really proud of but the engine controller I was originally using was terrible... I am currently listening to the sounds of my engine running on max power thanks to your controllers and to celebrate, I played in the propellor blades! Thanks again!

I definitely think that having the option to hook up a key button for engine power more easily should be added, but this microcontroller is already pretty great. Keep up the good work!

MrNJ: "These engines are really powerful." Someone: "Too powerful? I gonna instantly reduce it and kill the wheels." Players: *Suffers*

RPS limiter would be nice, also a nicer option to choose between lever or seat.

Yessss please make a bigger version

Bigger version with throttle and on/off starter, planning to use this in a train.

Thanks my creation will be finished.

As always it's a great video and i would love to see a RPS limmiter!

a kick down feature would be nice, so lets say the engine is sat at 12 rpm when cruising, if a throttle demand is higher than 0.8 it will automatically switch down to the next gear to improve acceleration

Could you remove the engine start/stop from the seat and make it just an simple on/off? I want to use key switches

@redstone_orange

3 жыл бұрын

You would still be able to start the engine with the hotkey because the hotkey is still an on off, using composite just doenst allow us to use key switches

@theepichedgehog

3 жыл бұрын

@@redstone_orange I made a simple microcontroller to do just this. The seat just uses the hotkey as an on off state, and i had a key input into a microcontroller that mimicked the same channel as a seat using the composite read, then had a composite output that went into the seat input node on NJs ecu. i did the same for an external throttle

@mickey_mousey

2 жыл бұрын

@@theepichedgehog You could've just figured out how the logic in the ECU worked and just implemented the feature :P

Nice video

Is there any way to hook up multiple engines with regard to the composite engine data node, currently trying to get a 4 motor plane to work with this ECU.

MrNJersey, why when i use these two microcontrollers on my boat with small propellers i can't get good speed and trudge like a turtle? three gearboxes are installed, two to the side of the engine (first and rear), one to the side of it

Just wondering with the ecu do I need one for each modular engine or can I control both engines with 1 ecu?

Dang, i miss you my man

how do u convert throttle to composite? i have a pretty big ship where i start the engine down below and steer it at the helm.

Please make a ecu compatible with throttle levers

there's kinda issue with clutch i connected everything accordingly your lil car and when i press 1 to start the engine, my car starts moving with electric motor (used as starter without starter). The clutch (it is attached to gearbox controller) activated by default for some reason. And of course, there's not enough rps to start the engine with fuel and air. Once I disconnect a number value from a clutch, the engine starts working properly. So i don't know what to do

My boat starts spinning up but at a certain point it starts turning on and off very rapidly. So far i've only gotten it to work by putting 2 gearboxes in at a 3:1 ratio but then it's extremely slow. Is my engine just underpowered or am I missing something

didnt expect it to be out at this hour

@MrNJersey

3 жыл бұрын

Long day at work. Got it out as soon as I could today.

@cuteanchor9684

3 жыл бұрын

@@MrNJersey what do you do as a job, if you don't mind me asking?

a bigger version would definitely be helpful for those who might build trains or more complicated builds. A speed controller component may potentially aide builders that have a plan in mind don't need unlimited power

I noticed that you don't seem to use the turbopumps on your builds, is there something wrong with them?

so mrnjersey i would like to know are your car 2 wide in the midel for design or function?

Found your lever one on steam, but It don't work. The starter works, but lever, even when connected it does not work. It starts and dies, that about it. Don't even know if the transmission part even works. But I know I can't make revers kick in. I don't think my seat sends the signals or something.

I'm making a 5x5 engine inline 6 useing your modular ecu v5 and with one fuel and 4 air I still tells me to much fuel and is only spinning at 2.2 slowly dieing what am I missing the fuel value is there but there is no air value how is it not getting air

i've been following the tuorials to the letter but every time i try to use it itwon't respond to my gear changes at all, it also won't idle, and when it moves forward, it just sputters and stops moving after a few seconds please help if possible

Yes please a bigger version of the ECU

I literally made the exact same setup as you and every single time it just cranks and cranks and cranks and then your controller says too much fuel. Isn’t it supposed to adjust for this?

Thank god

Can you make a bigger version with throttle lever control

can you show us how to have the fuel and air mix stay when u let the clutch in and out?

If you didn't want the prop turning when idaling could you conect a normal couch and hook it up to ws on the seat so power will only go through the prop if ws is pushed?

@MrNJersey

3 жыл бұрын

Yah its what I recommended and use on my car for example

@cuteanchor9684

3 жыл бұрын

@@MrNJersey thanks🙃

whenever I make a car it gets a lot of wheel spin any solutions?

The RPS limiter sounds like a good idea, My Truck goes trough 7 Gearboxes and Still overev itself to oblivion XD

Yup literally tried absolutely everything and the engine will not idle unless the starter is toggled on and it revs to max rpm and just stays there. The throttle input from the seat doesn’t work either. I toggle the motor on, it revs to max rpm, I toggle the starter off and it dies. It won’t idle like it’s supposed to

Does this work with the flat 8?

Does anyone know the composite channel far all the ecu data including the transmission

Im currently using this awesome microcontroller. Everything works except reverse. When I change it to reverse on my composite display I have it set to the digit and it shows a dash, im assuming it means it is in reverse. My RPM changes to a negative value, but when I throttle forward the boat does not move. What am I missing?

@cf453

2 жыл бұрын

I'm not sure why your boat isn't moving, but the dash is the display trying to show the gear as "-1".

I am currently building a boat so the ability to add a starter button and throttle lever would be helpful.

I think it is reasonable. Keep in mind 40 rps is only 2400 rpm far lower than most car engines. Even for diesel engines that is not an especially high rpm, it depends on the cylinder bore, eg a semi truck engine runs around 2400-4600 rpm, some massive diesel engines in ships turn at 80 rpm for the long stroke massive bore kind.

any chance for the engine ecu to have two numerical output for valves regulating the inress of air and fuel to reach the specific afr?

@MrNJersey

3 жыл бұрын

But the Air Throttle And Fuel Throttle do that already no....?

Great Work! Thank you! I have one problem though. Whenever using a/d (reset mode; 100% sensitivity) from my seat for manual gear change the gears just keep going all the way up or down to max or min value, even when the engine is turned off. Its as if the pulse doesnt work. Any ideas?

@kaiserchopp8892

2 жыл бұрын

NM. I mixed up a/d with up and down

I would like an ECU that also accounts for forced induction [Superchargers / Prochargers] as an optional setting, trust me I know that is a pain in the rear

Bigger version please!

Can you upload to the workshop the engine with the working ecu?

could you make a tutorial on how to use each controller, as i cant seem to work them

When upshifting it cuts my throttle so much that it shoots down to under 1 RPS and makes it immediately downshift, any clue what's wrong?

@youraveragecapybara

3 жыл бұрын

I had that it doesn’t have enough power

I put this on my truck and as soon as I reach 20-30 rpm it shifts and immediately kills the engine, does anybody know how to fix this?

Can we get a tutorial on how to set up gear boxes? I understand the basics of torque vs RPS, but not to chain gears together in a way that makes any sense

@TheFelepeno

2 жыл бұрын

Did you ever find anything that explains this better? It's rather difficult to figure this out online.

Could you make a bigger version, like for a ship or train?

It would be nice to also have a smaller version for small forklifts n stuff

Whenever i put this ECU in my vehicle, it just says ''Too much fuel'' and the engine is dying, any fix to the too much fuel thing?

@AmusingERLC

Жыл бұрын

same

I like how you literally jump into the video at the start, I noticed that lol cute lol

Id like to see a bigger version

What is the gear ratio for the gearbox for a car?

@cuteanchor9684

3 жыл бұрын

It's different for every car so just experiment until you find the sweat spot. It is not easy. It takes a lot of time. The first car I built I spent a equal amount of time on body+chassis : engine : gearboxes (about a hour each).

maybe an ECU that can manage the transmissions to travel as efficiently as possible at a set speed by finding optimal gear ratios and maintaining an efficient rps to power balance instead of waiting to reach a certain rps to up/downshift. in tinkering with workshop creations I've been able to more than double the efficiency of some vehicles by messing with gear ratios and engine power output. I don't know how good it would be for the new modular engines but I would love an ECU like that.

@B0xwell

3 жыл бұрын

also I would love an ECU compatible with throttle levers!

cannot find your ECU in the workshop

I can get 8 ratios with 3 gearboxes, just enable them in a specific order to get tons of gradual changes.

@serg_sel7526

2 жыл бұрын

Wait a minute... Why my automatic gearbox switch has only 6 ratios... What did I missed...

@redpug5042

2 жыл бұрын

@@serg_sel7526 because your controller isn't mine.

@serg_sel7526

2 жыл бұрын

@@redpug5042 yes, but amount of ratios is 2^n where n is amount of gearboxes, 3 gearboxes will have 2³ =8 ratios

Another engine cotroler with non composite controls would be awesome

Bigger ecu please

so, you only want to run your engines at a stoichiometric of 0.2 (best power/fuel, best power/heat, best power overall). you need an afr of 13.6+clamp(temperature*0.004,0,0.4) there is no case where you want to run your engine at any other stoichiometric.

@cuteanchor9684

3 жыл бұрын

Sound interesting, presume this is storm works not irl?

@Adesterr

3 жыл бұрын

@@cuteanchor9684 yes, only in stormworkn't

My car every time I accelerate the RPS drops a lot

Whenever I throttle up the engine starter toggles on and off. Anyone know what I did wrong?

@Sheycara

3 жыл бұрын

don’t know 100% sure, but my guess would be that maybe you’re over stressing the engine? try adding another gearbox that’s pointed at the engine and set 1 to something like 1:3 and 2 to 1:1 and set that as your first gear, that way your engine has to work 3 times less hard to start up and not instandly killing it and making it use the starter to keep it’s RPS high enough (again though, just a thought, i haven’t actually used any of the modular engine stuff yet, this is just what i’d assume it to be since that’s how it would work on a real engine)

@primebreaker4839

3 жыл бұрын

Thanks! I'll try this

@primebreaker4839

3 жыл бұрын

There is no 1:3 ratio in the gearbox.

@Sheycara

3 жыл бұрын

@@primebreaker4839 probably just the 3:1 than, as long as the gearbox is pointed the right way :P

bigger version with throttle lever would be great

I just can't make this work, it always says too much fuel

YES rev? RPS limier pleas

First I think but not really, good work

Please please please make the bigger version

Nice Version, a Throttle ... -,-

100% rps limiter please!

Make rpm limiter

The 2 clutches make it mad confusing

Keep both. The normal one and slow create a bigger one. The bigger one can be used when there is no space broblem in out creations

I swear to never build a car ever again.

Ahh I hate these engines I gotta make a test car because I tried to convert a truck from jet to modular and it's a pain.

LALA LALA lALA!

rps limiter plsssssssssssssssssssssssssssssssssssssssssssssss

I'd like to see a creep feature like a real life auto box.

@cuteanchor9684

3 жыл бұрын

Isn't that a bad thing though?

Not really a tutorial there is it? It's really just an ad for your creations... What the hell happened to you, man? You used to actually walk people through how to create stuff, now it's just "here's what I made, go download it."

@MrNJersey

3 жыл бұрын

Did you miss the full tutorials on how to make the transmission and use modular engines that were released?

@grit9938

3 жыл бұрын

@@MrNJersey I did watch those. I've also dissected some of your controllers to try to learn a bit more. I just can't help but notice that several times now you've posted a "tutorial" and it wasn't really a tutorial. I watch most of your build videos and I think you do a good job, I was just put off by the title vs the content.

@grit9938

3 жыл бұрын

Eith that said, after reading many of the comments, it would seem most people are more interested in being provided with an mc instead of making their own, so I can't blame you for catering to your followers.

@cuteanchor9684

3 жыл бұрын

There was a full tutorial on modular engines, the one with the simple multiplication block, it is up to YOU to expand and learn from that and do your own experiments to work out how to make your own. He did do a basic tutorial to get people started and is now showcasing his own solutions to help people who don't have the time or skill to make a ECU. If he made a tutorial on the ECU itself I am sure it would be over 2hours long to explain how it all works. This is complicated stuff.

@grit9938

3 жыл бұрын

@@cuteanchor9684 I still stand by the original premise. The title of the video is "NJ Modular Engine ECU & Transmission tutorial" but it isn't a tutorial on how to build an effective ECU in the game, just how to use his specific ECU. He's done this several times now. The modular engine tutorial is about the only actual tutorial he's done in quite a long time, despite tagging his videos as a "Tutorial." I am well aware of how to make a modular engine run, that's not the point. It's that he is falsely tagging his videos as tutorials when they are not, for clicks.